-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
BEYERS Kurt
Sent: Thursday, August 02, 2007 3:45 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Extend library capacity
I've got it solved finally. The new added slots on the physical library
were not ye
ht-
> Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens
Baker,
> Jane
> Verzonden: woensdag 1 augustus 2007 9:41
> Aan: ADSM-L@VM.MARIST.EDU
> Onderwerp: Re: [ADSM-L] Extend library capacity
>
> We found when we changed the library config (only logically) they
o the slot number
or numbers???
Hope you get it resolved soon!
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
BEYERS Kurt
Sent: 01 August 2007 08:30
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Extend library capacity
Thanks for the answers.
with something else
while TSM is busy.
Regards,
Kurt
> -Oorspronkelijk bericht-
> Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens
Wanda
> Prather
> Verzonden: dinsdag 31 juli 2007 18:11
> Aan: ADSM-L@VM.MARIST.EDU
> Onderwerp: Re: [ADSM-L] Extend libra
The document you reference is peculiar. It says the "server may have to
be restarted or the library audited or possibly redefined", but it doesn't
make clear the cases where it needs to be redefined.
AFAIK, when you change the number of slots in a TSM SCSI library, you have
to delete the library
TSM is kind of funny when you mess with the library and/or definitions.
I usually end up removing and recreating all paths, drives and
libraries to resolve my issues.
Nicholas Rodolfich
TSM/AIX Administrator
East Jefferson General Hospital
Fidelity Information Systems
504-883-6955 (office)
228-223
Hello,
I've got the following setup:
TSM server 5.4.0.3 on AIX5.3 TL5 (Extended Edition)
Adic i2000 library
The capacity of the library was extended from 500 to 600 slots by
adding a license key. TSM was restarted afterwards and an audit of the
ibrary was done , but TSM still only saw 500 inste
Well, I managed to get it up and running. Good suggestion on the halt
and restart - completely slipped my mind to restart the box. It did
however take a full restart of the server (not just restarting the
service) in order for it to pick up the new config. As well, I had to
reenable the Managed
This may be too simple of an answer, but just increase the Max Scratch of the stgpool.
-Original Message-
From: Curt Watts [mailto:[EMAIL PROTECTED]
Sent: Friday, September 19, 2003 2:13 PM
To: [EMAIL PROTECTED]
Subject: Tape Library Capacity Increase Help.
Howdy,
I managed to
Did you halt and restart TSM after the Library was upgraded?
You need to do that so TSM picks up new configf of library.
You then need to immediately run an
"audit library blah checklabel=barcode" to synchronize inventory,
before doing any tape operations.
David B. Longo
System Administrator
He
Howdy,
I managed to increase the capacity of our IBM 3583 tape library from
18 LTO tapes to 54 LTO tapes but now the question arises, how do I get
TSM (4.2.3.2) to recognize the increase in the Tape Pool. My fear is
that because the tape pool has been set up with the estimation of only
18 tapes
92 79 SOLLENTUNAVäxel: 08 - 754 98 00Mobil: 070 - 399 27 51-"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> wrote: -To: [EMAIL PROTECTED]From: Zosimo Noriega <[EMAIL PROTECTED]>Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>Date: 03/12/2002 05:22AMSubjec
Daniel Sparrman [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 11, 2002 5:55 PM
To: [EMAIL PROTECTED]
Subject: Re: Tape Library Capacity Requirement.
Hi
It sounds like you're going to use a "full backup" software such as Legato.
However, I will do my estimates based on TSM, which
OM> cc:
Sent by: "ADSM: Subject: Tape Library Capacity
Requirement.
Please help me to calculate the require capacity of the tape library. I
have 3.7 TB of data and 4 versions of Archive (with 30 days retention
period) and 1 version of backup (full backup) will be implemented.
How can i calculate the required capacity?
Thanks for your help in advance.
Zosi Nori
will find it useful.
> -Original Message-
> From: Glenn MacIntosh [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, March 12, 2001 8:34 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Library capacity
>
> Hi,
>
> Try the mtlib command:
>
> mtlib -l/dev/lmcp0 -t10 -qL
-
From: Lawrence Clark [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 09, 2001 1:04 PM
To: [EMAIL PROTECTED]
Subject: Re: Library capacity
Hi:
You can determine how many volumes are used by each storage group by
entering:
dsmadmc -id=userid -pa=password 'select stgpool_name,count(*) from volumes
based on inbound traffic...
believe me, there are ways around running out of space but they are all ugly
later,
Dwight
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-Original Message-
From: Gill, Geoffrey L. [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 09, 2001 9:24 AM
To: [EMAIL PROTECTED]
Subject: Lib
Hi:
You can determine how many volumes are used by each storage group by entering:
dsmadmc -id=userid -pa=password 'select stgpool_name,count(*) from volumes group by
stgpool_name'
You can determine the 'unused' by entering:
dsmcmd "SELECT LIBVOLUMES.VOLUME_NAME, LIBVOLUMES.STATUS FROM LIB
Volu
Issue the following from your H50.
mtlib -l/dev/lmcp0 -qL
Curt Magura
Lockheed Martin EIS
Gaithersburg, Md.
301-240-6305
-Original Message-
From: Gill, Geoffrey L. [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 09, 2001 10:24 AM
To: [EMAIL PROTECTED]
Subject: Library capacity
Hello all,
My current setup, H50, 3494LIB, 4 3590's, 7133 D40, is beginning to come to
a point where I need more capacity, or so I feel. I would like for the
company to order the next section of library, 2 3494's, memory for the
computer, DASD and a few other bits now, but I found out yesterday i
21 matches
Mail list logo
