0:30 AM
To: [EMAIL PROTECTED]
Subject: Re: Update tsm 4.2 to 5.2
TSM 5.2 requires AIX 5.x and is not supported on AIX 4.3.3
When I was upgrading, I was told the best method was:
1) backup the system completely
2) upgrade to TSM 5.1.(latest) on AIX4.3.3 - stabilize
3) upgrade to AIX 5.x - stabilize
4)
.IT> cc:
Sent by: "ADSM: Dist StorSubject: Update tsm 4.2 to 5.2
Manager"
<[EMAIL PROTECTED]>
07/12/2004 07:48 AM
Please respond to "ADSM:
I have server TSM 4.2 is possible upgrete to 5.2 ?
now OS is aix 4.3.3 tsm 5.2 run on it or necessary aix 5.x?
which is the procedure exist a procedure redbook ..
sorry for my english
bye
]
Sent: Thursday, December 18, 2003 1:15 PM
To: [EMAIL PROTECTED]
Subject: TSM Upgrade to 5.2 from TSM 4.2 on an AIX 5.1 Server
Hello,
I try to get these info from IBM but they say they could not help me
unless I run into problems while doing it. Could you help?
Are they any documents in how to
Disregard. .. last note... just noticed you were going to 5.2... Doh
-Original Message-
From: Helen Tam [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 18, 2003 1:15 PM
To: [EMAIL PROTECTED]
Subject: TSM Upgrade to 5.2 from TSM 4.2 on an AIX 5.1 Server
Hello,
I try to get these
)
-Original Message-
From: Helen Tam [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 18, 2003 1:15 PM
To: [EMAIL PROTECTED]
Subject: TSM Upgrade to 5.2 from TSM 4.2 on an AIX 5.1 Server
Hello,
I try to get these info from IBM but they say they could not help me
unless I run into problems while
Hello,
I try to get these info from IBM but they say they could not help me
unless I run into problems while doing it. Could you help?
Are they any documents in how to install TSM 5.1.7.3? We have window
clients. Do I install TSM 5.1 base and then apply maintenances?
environment:
AIX 5.
3 14:07
> Please respond to "ADSM: Dist Stor Manager"
>
>
> To: [EMAIL PROTECTED]
> cc:
> Subject:Re: TSM 4.2 on AIX 5.2?
>
>
> On Thu, 11 Dec 2003 09:47:24 +0100
> Richard van Denzel <[EMAIL PROTECTED]> wrote:
>
> >
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
11-12-2003 14:07
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Re: TSM 4.2 on AIX 5.2?
On Thu, 11 Dec 2003 09:47:24 +0100
Richard van Denzel <[EMAIL PRO
ries run on aix 5.2, so TSM must work as
well.
Now if you don't start the TSM server after upgrading the os, and just
immideately upgrade TSM, you don't need to worry about TSM 4.2 on aix 5.2
either
> Met vriendelijke groet, with kind regards,
>
> Richard van Denzel
> Co
Manager" <[EMAIL PROTECTED]>
10-12-2003 17:23
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Re: TSM 4.2 on AIX 5.2?
On Wed, 10 Dec 2003 16:23:48 +0100
Richard van Denzel <[EMAIL PROTECTED]> wrote:
&
On Wed, 10 Dec 2003 16:23:48 +0100
Richard van Denzel <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> Can anyone verify (e.g. has anyone got it) that TSM 4.2.x will run on AIX
> 5.2?
>
why would you want to install an ancient, unsupported version of TSM?
> Met vriendelijke
Hello all,
Can anyone verify (e.g. has anyone got it) that TSM 4.2.x will run on AIX
5.2?
Met vriendelijke groet, with kind regards,
Richard van Denzel
Consultant
IBM CATE, TSM Certified Consultant
Solution Professional Services B.V
>From the command line of the Exchange server.
excdsmc /adsmquerydb:* /adsmoptfile: >"what ever file you want to output it
to"
-Original Message-
From: Gerald Wichmann [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 8:27 PM
To: [EMAIL PROTECTED]
Subj
Gerald,
Version 1.1.1 used a different command-line syntax.
You should just be able to issue the "ADSMQUERYDB" command
and redirect the output to a file.
For example:
EXCDSMC /ADSMQUERYDB:* /ADSMPWD:password > OUTPUT.TXT
Thanks,
Del
>
I was just looking at my Exchange TDP output and have it showing all
exchange backups ever created. It shows directory backups and information
store backups (full and incremental. exchange 5.5). Is there someway I can
query our output this list of backups to a text file? On the TDP side I
don't see
AIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
15.08.2003 16:38
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Updrading from TSM 4.2 to 5.1
Hi All
Ok, I'm sure this has be
Hi All
Ok, I'm sure this has been covered many times, but it looks like in order
to make use of IBM 3590H drives, I'm going to need to upgrade my TSM
4.2.2.12 Solaris server to 5.1.
So, does anyone have a pointer to a good break down of the steps required
to do this on a Solaris system (has anyon
TED] Komu: [EMAIL PROTECTED]
LPINA.COM> Kopie:
Odeslal: "ADSM: Předmět: Wanted : Link to TSM 4.2
peformance
: Montag, 24. Februar 2003 12:50
An: [EMAIL PROTECTED]
Betreff: Wanted : Link to TSM 4.2 peformance and tuning guide
Hi List,
I saw a (broken) link to this guide in a previous post, then tried to find
this masterpiece on the new IBM-Tivoli website, without luck :-(
Was somebody better than me in
Hi List,
I saw a (broken) link to this guide in a previous post, then tried to find this
masterpiece on the new IBM-Tivoli website, without luck :-(
Was somebody better than me in that hunt ?
Thanks in advance !
Arnaud
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Pan
We are implementing a dedicated VLAN for gigabit-ethernet traffic and jumbo
frames, primarily for backup/recovery TSM traffic. Do the following settings
make sense for TSM/AIX servers in a large (2TB per backup window)
environment? Any recommendations for network switch settings (i.e. keeping
MTU s
Eric,
try to specify full path to the BLOCK device, not to the character, i.e.
include.image /dev/lv0 mgclass
Maria Ilieva
- Original Message -
From: "Eric LANGUILLE" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 13, 2002 12:13 PM
Subject: TS
In the coding of the dsm.sys, include.image /name_raw device mgmt class
In the coding of the dsm.opt, domain.image /name_raw device
The result is that TSM doesn't take the management class which is coding in
the dsm.sys but get the default mgmt class
We tried to code the include.image in the para
Eric,
One way to migrate the clients from ADSM 3.1 to TSM 4.2 .
On the client, in the dsm.sys file, change the serveraddress
that is pointing to the ADSM 3.1 to TSM 4.2 .
Since the system with TSM 4.2 is not aware of the client, when
the client does its first backup to the TSM 4.2 it will be a
, how do i do to restaure or retreive data
which have been saved in ADSM 3.1?
Sincerlys
"Dennis Glover" <[EMAIL PROTECTED]> le 29/11/2002 16:46:51
Pour :Eric Languille/production/A-S@ELISA
cc :
Objet : Upgrade ADSM 3.1 to TSM 4.2
Sir,
I have performed the upgrade path
We have two servers today, one in 3.1 , the othen in 4.2. What is the best
solution to migrate.?
Export every client on a library and import them in 4.2, but the duration
is very important, isn't it?
Best regards
___
Ce message est strictement confidentiel. Son intégrité n'est pas assurée
sur
If i do a retreive, my tapes are offsite. When i do the retreive, i would
know which tapes are required? Why, i would like to have a list off all
tapes before.
I 'll have my list of tapes and i'll put in the library, and will make a
checkin on them, so, i'll make the retreive without any message.
_
TSM say us that the process is ok when we make a back up or a archive, but
we dont know if all the objects are backuped or archived? I would like to
know if somebody knows how make a verification by a script .
Example : I have a backup to do avant destruction of datas, automaticaly, i
would like to
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Wu, Jie
> You need to delay your upgrade. We are running AIX 5L and TSM 5.1. Server
> crashes everyday. The initial response from TSM support was that
> all clients
> need to have at lease version 4.2.
This is pretty poor, alarm
"Wu, Jie"
> <[EMAIL PROTECTED] To: [EMAIL PROTECTED]
> GOV> cc:
> Sent by: Subject: Re: TSM 4.2 - 5.1
> Upgrade
> "ADSM: D
t; problem.
>
> Thanks!
>
> Kathleen
>
> "Wu, Jie"
> <[EMAIL PROTECTED] To: [EMAIL PROTECTED]
> GOV> cc:
> Sent by: Subject: Re: TSM 4.2 - 5
d in knowing if anyone else on AIX 4.3 is having this
problem.
Thanks!
Kathleen
"Wu, Jie"
<[EMAIL PROTECTED] To: [EMAIL PROTECTED]
GOV> cc:
Sent by: Subject
, September 27, 2002 9:00 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.2 - 5.1 Upgrade
We are thinking about upgrading our TSM server (AIX 4.3) and clients (WinNT,
AIX, Solaris) from TSM 4.2 to TSM 5.1. Has anyone encountered upgrade
issues? All feedback is very much appreciated. Thanks, John
We are thinking about upgrading our TSM server (AIX 4.3) and clients (WinNT,
AIX, Solaris) from TSM 4.2 to TSM 5.1. Has anyone encountered upgrade
issues? All feedback is very much appreciated. Thanks, John
_
Send and receive
Hi all,
we experienced a TSM Server 4.2 installation on NT4SP6
server (IE 5.5).
When running setup.exe, dialog boxes prompt our
administrator about installation path, installation
type, etc. then clic Finish button.
A Dr Watson appears and installation procedure stops.
After investigations on th
Hot Diggety! Mark Stapleton was rumored to have written:
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Dan Foster
> > Does anyone know where I can get a SNMP MIB definition file for TSM 4.2?
> > I know it's capable of SNMP support, but in order
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Dan Foster
> Does anyone know where I can get a SNMP MIB definition file for TSM 4.2?
> I know it's capable of SNMP support, but in order to meaningfully use it,
> need a MIB to plug into the monitoring system an
Does anyone know where I can get a SNMP MIB definition file for TSM 4.2?
I know it's capable of SNMP support, but in order to meaningfully use it,
need a MIB to plug into the monitoring system and I don't seem to be able
to find a MIB anywhere.
-Dan
Guess what folks!
I've got 2 drives. One of them mysteriously went offline
I haven't noticed it for a week :)
q acctlog did not show it.
TSM lacks of proper event logging.
Thanks for your help!
Best Regards!
---
zee
%> Hi Zbyszek,
%>
%> Just try this one
%>
%> "select volume_name,pct_reclaim,stgpool_name from volumes
%> order by stgpool_name,pct_reclaim desc"
%>
VOLUME_NAMEPCT_RECLAIM STGPOOL_NAME
-- --- --
/usr/tivoli/tsm/s-
%> 1. Ensure expiration is happening - if expiration interval
%> in 'q stat' output is 0 there must be admin schedule for
%> 'expi inv'.
Thereis no expiration interval in q stat... but several times i ran expi
inven
%> 2. 'q stg f=d' will show
%> you the reclamation threshold. It usually has
ant
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject:TSM 4.2, Private won't go into scratch
Hi everyone. I have a concern.
Maybe I
Another thing to look at is q stg f=d at what the reclamation level
is
-Original Message-
From: Christoph Pilgram
[mailto:[EMAIL PROTECTED]]
Sent: Friday, July 12, 2002 5:51 AM
To: [EMAIL PROTECTED]
Subject: AW: TSM 4.2, Private won't go into scratch
Hi Zbyszek,
Just try thi
%> -Original Message-
%> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]
%> On Behalf Of Christoph Pilgram
%> Sent: Friday, July 12, 2002 11:03 AM
%> To: [EMAIL PROTECTED]
%> Subject: AW: TSM 4.2, Private won't go into scratch
%>
%>
%> Hi Zby
quot;Detailed"
Best wishes
Chris
> -Ursprüngliche Nachricht-
> Von: Zbyszek Borgosz [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Freitag, 12. Juli 2002 11:50
> An: [EMAIL PROTECTED]
> Betreff: Re: TSM 4.2, Private won't go into scratch
>
> %> -Or
[EMAIL PROTECTED]]
> Gesendet am: Freitag, 12. Juli 2002 09:25
> An: [EMAIL PROTECTED]
> Betreff: TSM 4.2, Private won't go into scratch
>
> Hi everyone. I have a concern.
> Maybe I should RTFM, but don't have enough time to search.
> I have a following concern:
>
>
Hi everyone. I have a concern.
Maybe I should RTFM, but don't have enough time to search.
I have a following concern:
Magstar 3575-L12 and 40 tapes currently in slots. I backup everyday
54GB, which occupies 5 - 7 tapes. I set in backup mgmt class number of
copies to keep 2 whenever they have been
e or access it (it was
> there before the server upgrade). On top of that, when I bring up DSM in
> AIX is says "THE CLIENT CODE IS DOWN-LEVEL" and shuts down. All the data
> from my Win2k clients at TSM 4.2 seem to be intact. Has anyone seen this?
> According to Tivoli, 4
nsultant
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject:TSM 4.2/AIX setup questions
Environment: TSM 4.2.x on an AIX 4.3.3 ML10 server
Hot Diggety! Miles Purdy was rumored to have written:
> NO! Remember that a copypool is a complete copy. So everything that is offsite is
>onsite.
>
> TSM does not need the offsite tapes to reclaim them!
Ah, that is a good point, when put that way. ;)
> But you are correct: You could send a tap
Hot Diggety! Prather, Wanda was rumored to have written:
> 1) Is there any particular reason to set a max file size for a disk stgpool?
>(Assuming a setup where disk stgpool will migrate to tape stgpool)
>
> >>>The rationale for setting a max file size goes something like this:
>
> Suppose you
You could just ask me some of these questions you know.
David N. Reiss
TSM Support Engineer
[EMAIL PROTECTED]
407-736-3912
-Original Message-
From: Dan Foster [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 13, 2002 10:20 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.2/AIX setup
rything once you get hardware installed.
David Longo
>>> [EMAIL PROTECTED] 06/13/02 12:07AM >>>
Environment: TSM 4.2.x on an AIX 4.3.3 ML10 server (660-6H1) with a 3584-L32
and a 3584-D32 expansion frame.
In the process of setting it up, which is a luxury that I'll have only
1) Is there any particular reason to set a max file size for a disk stgpool?
(Assuming a setup where disk stgpool will migrate to tape stgpool)
>>>The rationale for setting a max file size goes something like this:
Suppose you have mostly small files backing up, and just a few humongous
ones:
copy pool, unless this is what you
REALLY want. In general I don't think you want to you. Not using collation will keep
fewer tapes, more full. Preventing tape thrashing, if you like.
Miles
Hmm, I saw a suggestion in the TSM 4.2 admin guide to disable reclamation
for the copy stgpool (s
1) Is there any particular reason to set a max file size for a disk stgpool?
(Assuming a setup where disk stgpool will migrate to tape stgpool)
Generally yes, if you will be backing up a file larger than the stgpool. If you will
be backing up a file larger than the stgpool it may be more effic
the time. I
>would do something like this, everyday:
>
> 1. backup your clients to disk (disk storage pool)
> 2. make a copy to a copy storage pool (OFFSITE)
> 3. backup from the disk storage pool to your primary storage pool
> 4. backup your database, devconfig, volhist
> 5.
Environment: TSM 4.2.x on an AIX 4.3.3 ML10 server (660-6H1) with a 3584-L32
and a 3584-D32 expansion frame.
In the process of setting it up, which is a luxury that I'll have only once
to get it right. :) So, some questions (since I am still coming up to speed
on *SM).
1) Is ther
Bob, the latest ptfs are UQ65584 - 87. This is level 4.2.2.0.
You should be able to get these from IBMLink, SUF, or the tsm FTP site.
You should also get the 4.2.2.1 patch from the FTP site.
At 08:37 AM 6/6/2002, you wrote:
>We are planning to upgrade from the ADSM 3.1 server to TSM
cc:
Subject: Latest PTF Level for OS/390 TSM 4.2
We are planning to upgrade from the ADSM 3.1 server to TSM 4.2 this weekend
on OS/390. I have been trying to find out what the latest PTF level is for
this product, but so far without success. Does anyone
We are planning to upgrade from the ADSM 3.1 server to TSM 4.2 this weekend
on OS/390. I have been trying to find out what the latest PTF level is for
this product, but so far without success. Does anyone have any information
about that or any information about any problems found in the 4.2
Consultant
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject:Re: TSM 4.2 possible IP problem
Sean
the octet 255 is broadcast address, not t
ager" <[EMAIL PROTECTED]>
To: ADSM-L
cc:
Subject:TSM 4.2 server on Solaris 2.8
Anyone have any idea why a second instance of TSM server on Solaris will
ignore HTTPORT setting in the dsmserv.opt file?
Sent by: "ADSM: Subject: TSM 4.2 possible IP problem
Dist Stor Manager"
<[EMAIL PROTECTED]
EDU>
06/06/2002 07:27
AM
Please respond to
Does anyone know if the TSM server would have a problem with a client
attempting to connect via an IP address with the last octet being 255? I
have a server that will not talk to the TSM server, it has been rebuilt
several times, I have tried several different client versions and still no
luck.
To: ADSM-L
cc:
Subject:TSM 4.2 server on Solaris 2.8
Anyone have any idea why a second instance of TSM server on Solaris will
ignore HTTPORT setting in the dsmserv.opt file?
Anyone have any idea why a second instance of TSM server on Solaris will
ignore HTTPORT setting in the dsmserv.opt file?
We are currently testing TSM 4.2 on the following environment. SUN running
TSM 4.2, STK9310 Tape Library using HSC and Library Station. The tape drive
is 9840 Fiber Channel connected to Brocade 3800 and using Emulex HBA. We
have several issues that we are trying to resolve and it looks like
Nice catch, Bill!
- Original Message -
From: "Bill Mansfield" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, May 03, 2002 6:03 AM
Subject: Re: TSM 4.2 differences
> How about the TSM 4.2 Technical Guide Redbook SG24-6277
How about the TSM 4.2 Technical Guide Redbook SG24-6277? Not powerpoint, I know...
_
William Mansfield
Senior Consultant
Solution Technology, Inc
"Don France (TSMnews)" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL
ion of Contract Employees (P.A.C.E.)
San Jose, CA
(408) 257-3037
[EMAIL PROTECTED]
- Original Message -
From: "Gerald Wichmann" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 02, 2002 10:39 AM
Subject: TSM 4.2 differences
> Does anyone have the TSM
Does anyone have the TSM 4.2 differences powerpoint presentation on what
changed from 4.1 to 4.2? Or could point me in the proper place to look that
up. Thanks
Gerald Wichmann
Sr. Systems Development Engineer
Zantaz, Inc.
925.598.3099 w
408.836.9062 c
The AIX / TSM tuning parameters on pg 342 gives a table that states anything above
512BM system memory the bufferpool should be 131072. (Assuming 4k pages x 131072 =
524288K?) Will TSM use more physical RAM if you increase the bufferpoolsize larger
than the recommended 131072?
Thank you in ad
Do not forget the atldd.driver file also, it needs to be up-to-date for the
newer TSM versions 4.2+
Bernie M
cc:
Sent by: Subject: Re: problem after upgrding ADSM
to TSM 4.2
"
e reason, there have been
> problems with old driver
> and patch levels.
>
> -Original Message-
> From: Bernie M [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 17, 2002 2:00 AM
> To: [EMAIL PROTECTED]
> Subject: problem after upgrding ADSM to TSM 4.2
>
>
> Hi all,
]
Subject: problem after upgrding ADSM to TSM 4.2
Hi all,
I have just upgraded my ADSM server to TSM 4.2 on AIX
4.3.3 and am having problems with the definitions of
my drives. Ther is nothing using the drives, I can
access them using tapeutil but have the following
problems in TSMANR2017I
Hi all,
I have just upgraded my ADSM server to TSM 4.2 on AIX
4.3.3 and am having problems with the definitions of
my drives. Ther is nothing using the drives, I can
access them using tapeutil but have the following
problems in TSMANR2017I Administrator SERVER_CONSOLE
issued command: QUERY DRIVE
Hi all,
I lost the e-mail that someone ask about scratch tape problems when
converting to TSM 4.2
I went thru my note and found that we did have problems with scratch
tapes. Not getting any... We had problem reclaiming our tapes
I called tivoli support and this
running Oracle 7(I know needs to be upgraded and were
working on it).
We are currently running TSM 3.7 on AIX 4.3.3 and looking at upgrading to
TSM 4.2 on AIX 4.3.3.
My question is can we still use EBU backup from Oracle 7 it we upgrade to
TSM 4.2 or will
we need to wait till after we upgrade to
We are currently running Oracle 7(I know needs to be upgraded and were
working on it).
We are currently running TSM 3.7 on AIX 4.3.3 and looking at upgrading to
TSM 4.2 on AIX 4.3.3.
My question is can we still use EBU backup from Oracle 7 it we upgrade to
TSM 4.2 or will
we need to wait till
From: Xavier 1 Chavanet
Hi everybody,
We experience some I/O problem on our TSM solution based on IBM server, NT4
sp 6a, Storagetek L700 496 slots, 5 Seagate LTO drives connected to LSI HVD
cards (Storagetek recommendation), TSM 4.2.1.10 (quite the last patch). Two
drives are attached per scsi c
: [EMAIL PROTECTED]
Subject: Installing TSM 4.2 without Media CD
Hi i have a problem.
I am supost to get TSM 4.2 Media Kit CD for one of my customers, but it
sadly seem like the cd´s vent the wrong way around the world, because they
aren´t showing up.
I despredly need the 4.2 CD for windows. I have on
Hi i have a problem.
I am supost to get TSM 4.2 Media Kit CD for one of my customers, but it
sadly seem like the cd´s vent the wrong way around the world, because they
aren´t showing up.
I despredly need the 4.2 CD for windows. I have on the other hand access to
a 4.2 Windows server, but as i
> Since the issue of "old code" has been brought up, I wanted to ask a
> question. Can clients running ADSM 3.1.0.8 back up to a TSM 4.2 server? I
> am planning on upgrading my TSM server to 4.2.1.10 next week and still have
> 2 HP servers running 3.1.0.8. I realize that
*SMers
Since the issue of "old code" has been brought up, I wanted to ask a
question. Can clients running ADSM 3.1.0.8 back up to a TSM 4.2 server? I
am planning on upgrading my TSM server to 4.2.1.10 next week and still have
2 HP servers running 3.1.0.8. I realize that this is not
We are still using an ADSM v2.1.16 for OS/2 server.
I just realized that end of service was 12/31/01. There was no upgrade
for 2.1 on OS/2.
We need to migrate to a newer version. It appears there is not a TSM
Server for Linux. Is one expected?
If we chose to migrate to v4.2 on Windows, does any
I'm sure this has been asked before, but here goes:
Does TSM back up (and therefore restore) the user rights of a Novell 5
volume? Is there an option to activate this or is it default behavior?
If I restore the files to a new server (i.e. not to the one I orginally
backed from) will the rights
tor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Re: TSM 4.2 Install Problems.
Stuart,
I have done numerous W2K installs, and have not had any problems.
Please check for any third party software that runs on this server such
as Antivirus or monitoring so
, January 12, 2002 9:10 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.2 Install Problems.
Stuart,
I have done numerous W2K installs, and have not had any problems.
Please check for any third party software that runs on this server such
as Antivirus or monitoring software. These need to be
: "Stuart Pitt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 11, 2002 5:13 AM
Subject: TSM 4.2 Install Problems.
> Hi,
>
> Currently having problems installing 4.2 Client onto Windows 2000 Server.
> Keep on getting Internal Server error
Hi,
Currently having problems installing 4.2 Client onto Windows 2000 Server.
Keep on getting Internal Server error 2755.1632 when installation starts.
Any Ideas???
Regards
Stuart
Infrastructure Services
Operations Bridge
Innogy
Swindon
* 01793 896060
Fax 01793 896065
* mailto
: [EMAIL PROTECTED]
Subject: Re: TSM 4.2 dsmc errors on irix 6.5 client.
Thanks, but I am not sure if your caught the fact that I am booting off the
install cd, then exscaping to a shell while using the mini-root. I don't
think I can install SGI DMI ...
my purpose is to just get enought of the
THANK YOU,
Keith
- Original Message -
From: "Seay, Paul" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 27, 2001 6:36 PM
Subject: Re: TSM 4.2 dsmc errors on irix 6.5 client.
> SEEN THIS BEFORE.
>
> You have to install the SGI DMI X-OP
TB on them.
-Original Message-
From: Keith Kwiatek [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 27, 2001 2:35 PM
To: [EMAIL PROTECTED]
Subject: TSM 4.2 dsmc errors on irix 6.5 client.
Hello,
I am writing some tsm 4.2 recovery instructions for irix 6.5.
I boot off the irix install cdrom, a
Hello,
I am writing some tsm 4.2 recovery instructions for irix 6.5.
I boot off the irix install cdrom, and then go to a shell, where I then tftp
"dsmc" and the license file over.
BUT when I try to run dsmc it says it cannot map soname to libdm.so to any
filenames.
Does anyon
;ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Tivoli TSM 4.2.x PREScheduecmd
Hello All,
I need to stop a NT service before my scheduled backup starts. Can I
accomplish this by using the PRESCHEDULECMD option. If so let me know how
to do thi
-
From: Gent, Chad E. [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 14, 2001 11:42 AM
To: [EMAIL PROTECTED]
Subject: Tivoli TSM 4.2.x PREScheduecmd
Hello All,
I need to stop a NT service before my scheduled backup starts. Can I
accomplish this by using the PRESCHEDULECMD option. If so let m
Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Gent, Chad E.
Sent: Friday, December 14, 2001 10:42 AM
To: [EMAIL PROTECTED]
Subject: Tivoli TSM 4.2.x PREScheduecmd
Hello All,
I need to stop a NT service before my scheduled backup starts. Can I
accomplish this by
Hello All,
I need to stop a NT service before my scheduled backup starts. Can I
accomplish this by using the PRESCHEDULECMD option. If so let me know how
to do this. Do I write a batch file and have the PRE command run that.
There are other ways to do this but I would like to keep everything i
1 - 100 of 206 matches
Mail list logo