Will the PMP 450i 900 MHz SM work with standard polarity? I understand they
work with Cambium polarity from 20-32V, but I want to run one off a
Netonix, and I'm not sure whether I need to reverse polarity or not.
Thank you - Chris
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/lis
No, they will not. They need to have negative on pins 4&5 and positive on
7&8. It'll work fine if you just swap those two pairs in one end of the
cable.
On Wed, Aug 1, 2018 at 10:23 PM Christopher Gray
wrote:
> Will the PMP 450i 900 MHz SM work with standard polarity? I understand
> they work wi
Thank you... I was hoping they started doing both like the ePMP line. It
would sure make it easier to transition to Cambium gear.
I have plenty of switched pairs, but they will eventually lead to fried
gear somewhere (when someone makes the mistake of plugging in the wrong
wire).
---
We have a Cambium 450i 900 powered by a Netonix WS-12-250-DC ("48V"
setting). Works fine. Check the Netonix forum for a list of equipment
verified that can be powered by a Netonix:
https://forum.netonix.com/viewtopic.php?f=6&t=1215
Mike Davis
On 8/2/2018 8:22 AM, Christopher Gray wrote:
Thank
That would be an AP though - those will run on pretty much any 48v PoE you
throw at it. The 900mhz 450i SMs do need to have the old Canopy PoE pinout.
On Mon, Aug 6, 2018 at 9:38 AM Mike Davis
wrote:
> We have a Cambium 450i 900 powered by a Netonix WS-12-250-DC ("48V"
> setting). Works fine. Ch
Yes. Good point. I was thinking about the AP. The Netonix forum article
is a good reference for POE compatibility.
Mike Davis
On 8/6/2018 11:17 AM, Mathew Howard wrote:
That would be an AP though - those will run on pretty much any 48v PoE
you throw at it. The 900mhz 450i SMs do need to have t
