Re: [AFMUG] crowdsource troubleshooting

Hey Josh, The new ePMP gigabit interfaces will work both polarities. You can actually use the old PMP100 power supplies with no issues that I have had so far. I have only left a couple in that mode because the existing customer wasn't home when we did the swap. All Cambium had to do was use a

Re: [AFMUG] Problems with Packetflux Powerinjector

I am changing a PMP 100. That is 2.4 GHz over to an EPM P1000 subscriber module and the PMP 100 works perfectly with the standard PMP 100 power supply or I can even switch it over to the EPMP1000 standard supply and it will work. But if I put the EPMP 1000 on it own supply that comes with it or

Re: [AFMUG] CNUT not updating SM's via auto update

T not updating SM's via auto update > > If I leave it at 0.0.0.0 it should update from any IP right? > > On Thu, Apr 19, 2018 at 7:02 PM, Philip Rankin <wireless...@gmail.com> > wrote: > >> Sam, there used to be a field on the front page of the cambium software >&

Re: [AFMUG] CNUT not updating SM's via auto update

Sam, there used to be a field on the front page of the cambium software that set out the upgrade IP address of the computer that was upgrading the subscriber bottle. That has to be sent to the correct IP of the upgrading computer or at least the network. Good luck On Thu, Apr 19, 2018 at 4:16

Re: [AFMUG] Remote access and mobile data for tech

Hey guys, I own a whole bunch of those channels similar to what Adam is talking about herein. Only mine are UHF and VHF old paging pairs that I bought at the FCC paging auction a few years ago. They are considered CMRS so they can be used for anything commercial almost. We do and did use them

Re: [AFMUG] Down tilt for 450i

Depends on haat. On Thu, Mar 15, 2018 at 10:03 PM Jay Weekley wrote: > We're putting up a KP Performance KPPA-900DP-90S for use with the 900 > MHz 450i APs. How much down tilt would you use to serve customers up to > 7 miles away? It has zero electrical down tilt >

Re: [AFMUG] How far from a tower is safe?

Badump! On Thu, Mar 15, 2018 at 11:40 AM Chuck McCown wrote: > It depends on whether they are aiming for you... > > -Original Message- > From: Jay Weekley > Sent: Wednesday, March 14, 2018 9:25 AM > To: af@afmug.com > Subject: [AFMUG] How far from a tower is safe? > >

Re: [AFMUG] Spam from Chuck

Spam me all you want Chuck. Unbeknownst to you, you have helped me more than about anyone throughout the years with your wisdom and products Sir! I suspect the same can be said about almost everyone on this list! I sincerely appreciate your list, your work, products and more so your wisdom

Re: [AFMUG] ePMP 3.5.1 new stable?

I have 13 APs in the air with very few SMs all running 3.51 and everything is running stable at this point. All 2.4GHz On Mon, Jan 22, 2018 at 2:03 PM, Brandon Yuchasz wrote: > What is everyone thinking on the newest firmware release are you willing > to consider it the

Re: [AFMUG] Sonar Migration from Platypus

an later. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Philip Rankin > *Sent:* Sunday, January 14, 2018 11:59 AM > > > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Sonar Migration from Platypus > > > > I’m curious, why change. I really like Plat and i

Re: [AFMUG] Sonar Migration from Platypus

I’m curious, why change. I really like Plat and it does everything I need. Phil On Wed, Jan 10, 2018 at 1:52 PM Sterling Jacobson wrote: > So here is a current update on my months long progress moving from > Platypus to Sonar. > > It's not automatic by any means. > > Data

Re: [AFMUG] WTB. 900 single pol omni

Chuck, do you have any design diagrams for that antenna. I'd like to see how you got it so compact. Phil Rankin On Fri, Jan 12, 2018 at 10:44 AM, wrote: > I used to make a slotted coax h pol omni at 900. About 9 dBi. Was 24 > inches long. Nice antenna. Not that this

Re: [AFMUG] WTB. 900 single pol omni

Has anyone tried using 2 separate omni base station antennas, 1 H and V pol with the new Cambium 900MHz 450I AP? Pretty hard to get balanced gain. Just wondering? The separation might help over a combo antenna. On Fri, Jan 12, 2018 at 7:53 AM, Craig House wrote: >

Re: [AFMUG] FS: Easy pass thru RJ45s heavy gold plated

Hi TJ, Sorry for the delay on th $7.00. I just sent you $45.00 for another 100 connectors if you will. Thanks. I'll buy 1000 next time, but for now,, Phil On Fri, Nov 17, 2017 at 4:29 PM, TJ Trout wrote: > Easy to install RJ45 connectors, plated in rare 50 micron

Re: [AFMUG] Conditional-use permit for tower

Chuck, bureaucrats are not pricks That's the best part of a man!!! They are the excrement that secreats from bureaucrat's ASSHOLES!!! Phil On Tue, Dec 5, 2017 at 12:46 PM, wrote: > One thing about bureaucrats, they love to have all the boxes checked and > all the

Re: [AFMUG] FS: Easy pass thru RJ45s heavy gold plated

TJ, Please contact me Monday so I can send you money for some connectors. wireless...@gmail.com. Phil On Fri, Nov 17, 2017 at 4:29 PM TJ Trout wrote: > Easy to install RJ45 connectors, plated in rare 50 micron GOLD, most > connectors are only plated with 3 micron of gold. > >

Re: [AFMUG] OT Quandry

Chuck, I can’t answer your real question. Sorry. But I am a car collector and depending on the configuration of tha Superbird, it may be worth in excess of $250K. Quite possibly over $1M. Please be very careful there. It could be possible that you’re worrying about the wrong funding scourge!

Re: [AFMUG] WTB 450i-900mhz used AP's

On Thu, Sep 28, 2017 at 10:46 AM Mathew Howard wrote: > I don't have any that are used, but I have some brand new ones sitting on > the shelf that I might be able to be convinced to sell... 900mhz has gotten > a lot noisier around here since we bought them, and I'm not

[AFMUG] winbox 3

I have recently downloaded a new version of Winbox, Winbox 3, I think. It has a different gui than the old winbox software that I have always used. anyway, it picked up all of my router informations that I had stored in my old Winbox and it worked perfectly for a few days. Then one day, it

Re: [AFMUG] 450 AP discontinued?

5GHz On Wed, May 3, 2017 at 9:16 AM Philip Rankin <wireless...@gmail.com> wrote: > Hey all, I have an original 450 AP that I am not going to use if someone > needs it. > > Phil Rankin, CEO > Mobilcom Wireless > > > > > On Wed, May 3, 2017 at 8:27 AM Kurt

Re: [AFMUG] 450 AP discontinued?

Hey all, I have an original 450 AP that I am not going to use if someone needs it. Phil Rankin, CEO Mobilcom Wireless On Wed, May 3, 2017 at 8:27 AM Kurt Fankhauser wrote: > I can't use EPMP for microsites because it won't sync with my 450 > network. Plus I don't

Re: [AFMUG] 3.65 Wimax

till have it, yes. Transitioning to LTE. > If you like-hated wimax, then you'll like-hate LTE even more. > > If you loved Wimax, then I don't think we can be friends. > > > -- Original Message -- > From: "Philip Rankin" <wireless...@gmail.com> > To

Re: [AFMUG] 3.65 Wimax

If you loved Wimax, then I don't think we can be friends. > > > -- Original Message -- > From: "Philip Rankin" <wireless...@gmail.com> > To: "af" <af@afmug.com> > Sent: 4/7/2017 1:56:26 PM > Subject: [AFMUG] 3.65 Wimax > > Is anyone st

[AFMUG] 3.65 Wimax

Is anyone still operating 3.65 Wimax? Has any other technology/wireless protocol come along that can compete with Wimax's superior nLos capability? At any other bands? I have no interest in 900. Thanks in advance for any feedback! -- Philip J. Rankin Wireless Telecommunications Services PO

Re: [AFMUG] Ubiquity 900MHz -- Mikrotik 900MHz

Thanks Mathew, I appreciate the information!

[AFMUG] Ubiquity 900MHz -- Mikrotik 900MHz

Asking any of you Ubiquiti and Mikrotik Gurus out there Are there any of the little (I think manufactured by Ubiquiti) pci cards made to operate in a Mikrotik Routerboard as an SM that is compatible with Ubiquiti's mimo 900Mhz Rocket as an AP? BTW, I try to monitor the list at least

Re: [AFMUG] Winter Clearance Sale

On Fri, Jan 20, 2017 at 3:10 PM Josh Luthman wrote: > Are you going to wait for winter before posting this sale though? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Fri, Jan 20, 2017 at

Re: [AFMUG] Rocket M365

Hi guys, I have 4 Rocket m365 new ID sell if anyone wants them. On Nov 1, 2016 3:18 PM, "Gilbert T. Gutierrez, Jr." < mailing-li...@phxinternet.com> wrote: > > I am not trying to bypass. I am just looking for an economical way to provide service to a rural area. My site already is pretty

Re: [AFMUG] 3.65 licensing

ifference is everything > registered after 4/17/15 does not get protection once the CBRS SAS system > gets going (probably late 2017 or 2018). > > After 4/17/2020 everything has to talk to the SAS. > > There's more to it obviously but that's the cliff notes version. There &

Re: [AFMUG] 3.65 licensing

> After 4/17/2020 everything has to talk to the SAS. > > There's more to it obviously but that's the cliff notes version. There > have been many WISPA webinars and they had 2 sessions about it at > WISPAPALOOZA. > > > -Sean > > > On Sunday, October 16, 2016, Philip

[AFMUG] 3.65 licensing

Can one of you point me to a comprehensive description of the current rules for 3.65? With a NN license, can we add APs, or CPE's legally still? What's supposed to happen to our NN licenses? Amy guidance is appreciated. -- Philip J. Rankin Wireless Telecommunications Services PO Box 24

Re: [AFMUG] Anyone interested in some Alpha/Honda Telco DC generators?

Price? On Sep 26, 2016 7:17 PM, "Gino Villarini" wrote: > Got a source for some Alpha Alphagen dcx3000 DC generators > > Units is the same as Honda EU3000, just DC output > > They are switchable between 36 and 48 v dc > > Units are used, running with 14 day warranty > >

Re: [AFMUG] Two Foot 5ghz DP Dishes

h Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Aug 4, 2016 2:45 PM, "Philip Rankin" <wireless...@gmail.com> wrote: > >> Josh, Are the 2 - 2 foot 5ghz dishes you have for sale? >> >&g

Re: [AFMUG] Two Foot 5ghz DP Dishes

Josh, Are the 2 - 2 foot 5ghz dishes you have for sale? On Thu, Aug 4, 2016 at 9:18 AM, Josh Luthman wrote: > I have two in the office, never deployed any. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 >

Re: [AFMUG] WTS couple FSK radios

How much, Josh? On Apr 1, 2016 2:14 PM, "Josh Luthman" wrote: > Bump. Anyone? Couple bucks? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 25, 2016 at 9:18 AM, Josh Luthman

Re: [AFMUG] Looks like more companies want to be WISPs

Please forgive me for hijacking the thread!! But, the additional bandwidth is not available at 3.65 or 3.5Ghz yet is it??? Nothing beyond the 3.65 - 3.70Ghz as has been for quite sometime?? On Wed, Feb 3, 2016 at 2:22 AM, Gino Villarini wrote: > 50 mhz block its 3.65

[AFMUG] ePMP 1000

Hey Everyone, Does anyone have any experience integrating the latest ePMP 1000 gear, more specifically on 2.4Ghz, with their PMP100 2.4Ghz system that they still have in place? The distributor says they will now play nicely. Anyone have experience? -- Philip J. Rankin Wireless

Re: [AFMUG] ePMP 1000

e St > Suite 1337 > Troy, OH 45373 > On Feb 2, 2016 6:09 PM, "Philip Rankin" <wireless...@gmail.com> wrote: > >> Hey Everyone, >> >> Does anyone have any experience integrating the latest ePMP 1000 gear, >> more specifically on 2.4Ghz, with t

Re: [AFMUG] OT Large slabs of wood

Might consider building the large slabs of wood yourself. I have put together 2"X6" tongue and groove decking by gluing them in the groove and made some 4' wide slabs. Works well. You can buy 'V' joint or non, your choice. After sand dint they look very nice. On Sat, Jan 16, 2016 at 12:36 PM,

Re: [AFMUG] Auditing IPpay

We audit ours about 4 times a year. It has never had an issue. And the fees for IP Pay are the best in the nation. I have worked with 5 different Merchant companies over the years and currently use 2, one being IP Pay and the other is for our paging company CRM software called Merchant ???. I

Re: [AFMUG] Blocking Tech Savvy person from Porn

I have used open dns pretty successfully. On Tue, Jan 5, 2016 at 8:48 PM, Josh Luthman wrote: > Upsidedownternet :) > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Jan 5, 2016 9:40 PM, "Eric Kuhnke"

Re: [AFMUG] Blocking Tech Savvy person from Porn

. > > Tim > > -- > -Original Message- > From: "Philip Rankin" <wireless...@gmail.com> > To: af <af@afmug.com> > Date: 01/05/16 10:03 PM > Subject: Re: [AFMUG] Blocking Tech Savvy person from Porn > > I have used open d

Re: [AFMUG] Pure wave

What do you have? On Dec 18, 2015 2:41 PM, wrote: > Anyone have any interest in buying some pure wave equipment > > Sent from my iPhone >

Re: [AFMUG] PMP320

Price? On Dec 8, 2015 5:52 PM, "Justin Aldridge" wrote: > Anyone interested in any PMP320 Equipment. > 1 3630apc > 18 3630sm > > -- > Justin Aldridge > Total Highspeed > 417-300-3534 >

Re: [AFMUG] Need new billing solution asap!!!

Guys, I am still a major believer in Tucows Platypus. Brett, I could have you up and running with Plat in under 2 days as long as you can answer speed and pricing questions as I ask them. And all I would need is remote access to a Windows 7 computer. Let me know if you are interested. Most of

Re: [AFMUG] Need new billing solution asap!!!

; Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Dec 5, 2015 at 2:34 PM, Philip Rankin <wireless...@gmail.com> > wrote: > >> Guys, I am still a major believer in Tucows Platypus. Brett, I could >> ha

Re: [AFMUG] Need new billing solution asap!!!

Brett, call me on Friday am and I'll be happy to help you with Platypus. Philip Rankin. 620-231-8188 On Dec 4, 2015 12:35 AM, "Brett A Mansfield" <li...@silverlakeinternet.com> wrote: > I'm looking for a good billing solution that is cheap and I can have up in > running

Re: [AFMUG] ISP Billing and Ticketing System

If anyone's interested, I'd be happy to set them up with a fully operational Platypus system. So versatile and easy to use. PM mw. On Thu, Nov 5, 2015 at 7:52 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > I suspect it's because there is yet to be a good solution. Their either

Re: [AFMUG] OT Guns etc

Especially with all thee libtard views out there today! On Sat, Oct 10, 2015 at 12:10 PM, CBB - Jay Fuller < par...@cyberbroadband.net> wrote: > > It is also a great reminder that people in other parts of the country do > not necessarily share your views. > Also a great reminder that the

Re: [AFMUG] OT Guns etc

, 2015 at 3:56 PM, Jaime Solorza <losguyswirel...@gmail.com> wrote: > Oh yeah you far right wingers score high on IQ tests. > > Jaime Solorza > On Oct 11, 2015 12:09 PM, "Philip Rankin" <wireless...@gmail.com> wrote: > >> Especially with all thee libtard

Re: [AFMUG] OT Guns etc

> wrote: > Come on now. Be civil. You only hurt your own argument when you resort to > name calling. People assume you are out of salient points to make. > > On Sun, Oct 11, 2015, 1:09 PM Philip Rankin <wireless...@gmail.com> wrote: > >> Especially with all thee libtard views

Re: [AFMUG] OT Guns etc

<j...@imaginenetworksllc.com> wrote: > Nixon Ford Reagan Bush... > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sun, Oct 11, 2015 at 4:55 PM, Philip Rankin <wireless...@gmail.com> &g

Re: [AFMUG] OT Guns etc

shame! No, Travesty! On Sun, Oct 11, 2015 at 3:33 PM, Philip Rankin <wireless...@gmail.com> wrote: > Haven't made my point yet Lewis. But, saw enough of those that were not > in agreement with you in the thread to know that they don't believe in > "Certain Inalienable Rig

Re: [AFMUG] Platypus question

I use Plat. I like it very well. Once you understand it, it is extremely versatile and does everything my wisp needs. We do pppoe, but it is capable of much, much more. It's very inexpensive.

[AFMUG] 3.65 Wimax

Hey all, I'm curious, whom on the list is operating 3.65 GHz Wimax and what Base Station equipment do you operate? More specifically, is anyone using Purewave 6636 base stations? phil -- Philip J. Rankin Wireless Telecommunications Services PO Box 24 Pittsburg, KS 66762

Re: [AFMUG] 477 tract/block info

towercoverage.com because it reports all the locations that we can provide service to. 2 cents -Sean On Thursday, February 26, 2015, Philip Rankin wireless...@gmail.com wrote: The hardest part for the Fixed Broadband Deployment portion of the filing is understanding what the FCC wants

Re: [AFMUG] 477 tract/block info

The hardest part for the Fixed Broadband Deployment portion of the filing is understanding what the FCC wants and then manipulating the data to get it into the format the Commission requires after you find where to find the Census information. (The Census information by state is all on

Re: [AFMUG] Interesting read

As an old time Ham Operator, it would be pretty cool to operate a data station at 420MHz using 100 watts or more! I intend to research it more. On Feb 21, 2015 10:53 AM, Jaime Solorza losguyswirel...@gmail.com wrote: Well I found it interesting Jaime Solorza On Feb 21, 2015 8:44 AM, Jaime

Re: [AFMUG] Net neutrality

This has probably already been said here, bu just in case not: The pubs are telling this: http://www.cnet.com/news/republican-fcc-commissioners-net-neutrality-plan-misleads-the-american-people/?tag=nl.e703s_cid=e703ttag=e703ftag=CAD090e536 On Wed, Feb 11, 2015 at 11:16 AM, Ken Hohhof

Re: [AFMUG] PMP 320 CPE 3.5 ghz

Daniel, Do you truly mean 3.5GHZ, or do you mean 3.65GHz?I have 3 each 3.5GHz Gemteks that I'd like to trade for 3 3.65 Gemteks or equivalent. On Mon, Feb 2, 2015 at 1:00 PM, Daniel Gerlach danielgerl...@gmail.com wrote: Looking for 20 Wimax CPE in 3.5 Ghz. WHO Can help? THX --

Re: [AFMUG] PMP 320 CPE 3.5 ghz

I am also looking for sub $100.00 3.65GHz 802.16e units that will operate with 10Mhz bandwidth. On Mon, Feb 2, 2015 at 1:16 PM, Philip Rankin wireless...@gmail.com wrote: Daniel, Do you truly mean 3.5GHZ, or do you mean 3.65GHz?I have 3 each 3.5GHz Gemteks that I'd like to trade for 3

Re: [AFMUG] Two FCC related questions

Don't y'all suppose that the Commission did this so that small wisps could not get access to USF since we can't meet the 25mbs benchmark. And since they are fixin' to require us to become common carriers that rule will make us pay into the USF without being allowed to withdraw money from it

[AFMUG] Teltonika Wimax CPE

Hey all, I have a Teltonika 3.65GHz Wimax CPE that I'm having difficulty programming the radio features, channel bandwidth and channels. I can't get Teltonika to respond for any information. I'm using the default user username and user password to try to program the thing. I suspect it is a

Re: [AFMUG] Teltonika Wimax CPE

I havent thrown them in the junk mans collection box On Tue, Jan 27, 2015 at 3:40 PM, Philip Rankin wireless...@gmail.com wrote: Hey all, I have a Teltonika 3.65GHz Wimax CPE that I'm having difficulty programming the radio features, channel bandwidth and channels. I can't get Teltonika

Re: [AFMUG] Dc electric load ? Chuck ?

We use automotive headlights for similar things. On Wed, Dec 31, 2014 at 1:23 PM, Sean Heskett via Af af@afmug.com wrote: string 20 x 100watt light bulbs in series? On Wed, Dec 31, 2014 at 12:11 PM, TJ Trout via Af af@afmug.com wrote: Anyone know of a inexpensive do it yourself way to make

Re: [AFMUG] -48 vDC Power Supply Recommendations?

For the price: http://www.ebay.com/itm/161276158483?_trksid=p2059210.m2749.l2649ssPageName=STRK%3AMEBIDX%3AIT On Wed, Dec 31, 2014 at 2:43 PM, Mike Hammett via Af af@afmug.com wrote: Looking for recommendations on a -48 vDC power supply. 1.5 amps. Not expected to have any other radios on site

Re: [AFMUG] access to Greenpacket wixs-177

properly. I’ll replace it with PMP320. No reason to continue to spend time on this. Steve B -- *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Philip Rankin via Af *Sent:* Friday, December 26, 2014 1:22 PM *To:* af *Subject:* [AFMUG] access

Re: [AFMUG] access to Greenpacket wixs-177

Hello Seth, Email me. wireless...@gmail.com. I'm Phil On Fri, Dec 26, 2014 at 1:47 PM, Seth Mattinen via Af af@afmug.com wrote: On 12/26/14 11:14 AM, Philip Rankin via Af wrote: Hi Steve, Thanks! I don't think these are the same. And, btw, I am not sure that I got any from you. Things

Re: [AFMUG] access to Greenpacket wixs-177

Another greenpacket? Depends on price and whether you have passwords. Let's go off list. wireless...@gmail.com On Fri, Dec 26, 2014 at 2:01 PM, Mark Radabaugh via Af af@afmug.com wrote: Want another one? Mark On 12/26/14 2:14 PM, Philip Rankin via Af wrote: Hi Steve, Thanks! I don't

Re: [AFMUG] access to Greenpacket wixs-177

BTW, everyone. I was able to contact the seller for my Greenpackets and he gave me the passwords. Thanks for looking. Would be nice to know if there is some sort of hardware reset on them, though. On Fri, Dec 26, 2014 at 2:25 PM, Philip Rankin via Af af@afmug.com wrote: Another greenpacket

Re: [AFMUG] Tower camera recommendations

Josh, is that your own webpage construction or are you farming that out to someone somehow? Phil On Fri, Dec 26, 2014 at 4:39 PM, Josh Luthman via Af af@afmug.com wrote: What's wrong with using a Ubnt AirCam? http://inxwireless.com/rain/ Josh Luthman Office: 937-552-2340 Direct:

[AFMUG] 3.65 wimax cpe

I'm looking for a source for used, cheap, 3.65 wimax outdoor cpe equipment. Anyone have any for sale. PM me at wireless...@gmail.com -- Philip J. Rankin Wireless Telecommunications Services PO Box 24 Pittsburg, KS 66762

Re: [AFMUG] FS: PMP 100 5.4 Ghz

I am interested! wireless...@gmail.com On Sat, Nov 15, 2014 at 1:55 AM, Daniel Gerlach via Af af@afmug.com wrote: 100 x 7 Mbit 5400 all for 800$ -- Philip J. Rankin Wireless Telecommunications Services PO Box 24 Pittsburg, KS 66762

[AFMUG] automated billing and provisioning system

Hi TJ, I have recently gone through the automated billing system upgrade. If you'd like to communicate directly, I'd be happy to give my 2 cents. Philwireless...@gmail.com -- Philip J. Rankin Wireless Telecommunications Services PO Box 24 Pittsburg, KS 66762