@afmug.com] On Behalf Of Mike Hammett via Af
Sent: Friday, October 10, 2014 6:23 PM
To: af@afmug.com
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets - Feedback
Wanted
I look for radios with 2x SFP. I don't find them as often as I'd like.
I'm not going to
Behalf Of Mike Hammett via Af
Sent: Friday, October 10, 2014 6:23 PM
To: af@afmug.com
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets - Feedback
Wanted
I look for radios with 2x SFP. I don't find them as often as I'd like.
I'm not going to bed with the radio,
t;
mailto:af@afmug.com>>
Date: Friday, October 10, 2014 at 6:01 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets - Feedback
Wanted
>Oh, and I don’t think metal glands necessarily requi
: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets -
Feedback Wanted
"Some" of the metal grommets won't let a pre-terminated cables through.
So if that is the issue (besides cost), then go with plastic.
However, there are good metal grommets that will let a pre-terminated
cab
with a nice chewy rubber gland to keep
stuff out. Two screws instead of a nut that again has to fit over the
plug.
-Original Message- From: Bill Prince via Af
Sent: Friday, October 10, 2014 6:34 PM
To: af@afmug.com
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets
.
-Original Message-
From: Bill Prince via Af
Sent: Friday, October 10, 2014 6:34 PM
To: af@afmug.com
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets -
Feedback Wanted
"Some" of the metal grommets won't let a pre-terminated cables through.
So if that is the issu
"Some" of the metal grommets won't let a pre-terminated cables through.
So if that is the issue (besides cost), then go with plastic.
However, there are good metal grommets that will let a pre-terminated
cable through. We just installed some Dragonwave Horizon Compact Plus
radios, which use
arles Wu via Af"
To: af@afmug.com
Sent: Friday, October 10, 2014 4:54:33 PM
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets - Feedback
Wanted
>I'm ok with plastic,
>put a spare in each..
>they often get lost anyway..
Economically, the plastic conn
. They all get dielectric grease
now.
- Original Message -
From: Charles Wu via Af
To: af@afmug.com
Sent: Friday, October 10, 2014 5:01 PM
Subject: Re: [AFMUG] [QUAR] Re: Microwave Backhaul Ethernet Grommets -
Feedback Wanted
>Oh, and I don’t think metal glands necess
>Oh, and I don’t think metal glands necessarily require terminating the cable
>after passing through the gland (something that should be avoided at all
>costs). If I’m remembering right when we installed some Exalt G2 links, they
>had a metal gland that you could pass a cable terminated >with a
>I'm ok with plastic,
>put a spare in each..
>they often get lost anyway..
Economically, the plastic connectors make a lot of sense, but there's just
something about it
Some additional thoughts...
The radio has a total of 4 holes (3 RJ-45 and 1 SFP connector for fiber)
What if I were to includ
11 matches
Mail list logo
