give your workstation a
> public IP temporarily.
>
> I've been using Maestro and haven't looked back.
>
>
> -- Original Message --
> From: "Sam Lambie"
> To: af@afmug.com
> Sent: 4/20/2018 12:38:20 PM
> Subject: Re: [AFMUG] CNUT not updating
ublic IP temporarily.
I've been using Maestro and haven't looked back.
-- Original Message --
From: "Sam Lambie"
To: af@afmug.com
Sent: 4/20/2018 12:38:20 PM
Subject: Re: [AFMUG] CNUT not updating SM's via auto update
If I leave it at 0.0.0.0 it should update f
If I leave it at 0.0.0.0 it should update from any IP right?
On Thu, Apr 19, 2018 at 7:02 PM, Philip Rankin
wrote:
> Sam, there used to be a field on the front page of the cambium software
> that set out the upgrade IP address of the computer that was upgrading the
> subscriber bottle. That h
Sam, there used to be a field on the front page of the cambium software
that set out the upgrade IP address of the computer that was upgrading the
subscriber bottle. That has to be sent to the correct IP of the upgrading
computer or at least the network. Good luck
On Thu, Apr 19, 2018 at 4:16 P
Hey all, I am using a NAT'd computer on our work lan and can access all the
AP's from this box. However, when I enable auto update to upgrade the SM's
first, Nothing happens. It used to work fine and in the past few months it
has not.
Any suggestions?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
57
