I have collocated with all sorts of 2 way gear on the same tower and had
my cabinet next to their cabinets with no issues.
Shielding will help for sure. The sites I get concerned with are AM/FM
broadcast towers that the FM is over 10K-100K watts
On 5/31/2016 10:16 PM, Jaime Solorza wrote:
Pictures/models and then we can say if they're gig =)
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, May 31, 2016 at 11:16 PM, Jaime Solorza
wrote:
> Don't know what models they are sending yet?
> On May 31, 2016 8:40 PM, "Josh Luthman"
Don't know what models they are sending yet?
On May 31, 2016 8:40 PM, "Josh Luthman" wrote:
> I mean you're going to have to specify one of the dozens of models for
> Cambium. Ruckus is likely to be gigabit, yes. I believe Ethernet is
> roughly 80-150 MHz though.
>
>
> Josh Luthman
> Office: 93
I mean you're going to have to specify one of the dozens of models for
Cambium. Ruckus is likely to be gigabit, yes. I believe Ethernet is
roughly 80-150 MHz though.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, May 31, 2016 at 10:38 PM,
Aren't these 10/100/1000 devices?
On May 31, 2016 8:23 PM, "Jaime Solorza" wrote:
> Hola BorgI am going to install a Cambium 5GHz ptp link and a Ruckus
> 2.4 GHz AP on same tower as UHF antenna next week. I am going to use
> Shireen shielded cable but curious if I need to run in conduit. I
I don't think Ethernet is going to get hit by 467 MHz. If you don't need
conduit I'd avoid the extra cost initially.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, May 31, 2016 at 10:23 PM, Jaime Solorza
wrote:
> Hola BorgI am going
Hola BorgI am going to install a Cambium 5GHz ptp link and a Ruckus 2.4
GHz AP on same tower as UHF antenna next week. I am going to use Shireen
shielded cable but curious if I need to run in conduit. I am going to
install POEs in different room from Motorola Digital Repeater, but don't
know
