t;af@afmug.com>
> *Sent:* Sunday, March 25, 2018 4:39 AM
> *Subject:* Re: [AFMUG] Down tilt for 450i
>
> That KPP sector actually is dual slant... I think we have one of those up,
> it should have a bit wider beam than the Cambium sectors, but it seemed to
> me like it performe
Has anyone run both kp and cambium? I'd be curious about a comparison
[posted Sun 3/25 @ 12:34 pm]
- Original Message -
From: Mathew Howard
To: af
Sent: Sunday, March 25, 2018 4:39 AM
Subject: Re: [AFMUG] Down tilt for 450i
That KPP sector actually is dual slant
> I agree we should be looking at dual slant. I think I'll revisit our
> design
>
>
> - Original Message -
> *From:* Colin Stanners <cstann...@gmail.com>
> *To:* af@afmug.com
> *Cc:* memb...@wispa.org
> *Sent:* Saturday, March 17, 2018 11:32 AM
> *Subject
I agree we should be looking at dual slant. I think I'll revisit our design
- Original Message -
From: Colin Stanners
To: af@afmug.com
Cc: memb...@wispa.org
Sent: Saturday, March 17, 2018 11:32 AM
Subject: Re: [AFMUG] Down tilt for 450i
Are you setting up all of your
What dual polarity 900mhz antennas are you finding that aren't slant?
Also, it works fine to mix slant and H/V between the APs and SMS with
PMP450.
On Sat, Mar 17, 2018, 11:32 AM Colin Stanners wrote:
> Are you setting up all of your 900mhz 450I to be dual-pol instead of
>
anywhere from .5 to 1.5 degrees if your 100' or so above average terrain.
On 03/15/2018 10:03 PM, Jay Weekley wrote:
We're putting up a KP Performance KPPA-900DP-90S for use with the 900
MHz 450i APs. How much down tilt would you use to serve customers up
to 7 miles away? It has zero
Are you setting up all of your 900mhz 450I to be dual-pol instead of
dual-slant? That simplifies procuring antennas but is not to Cambium
standard. It depends how flat the ground around you is, but at that
distance the downtilt will usually be zero.
On Thu, Mar 15, 2018 at 10:03 PM, Jay Weekley
Depends on haat.
On Thu, Mar 15, 2018 at 10:03 PM Jay Weekley
wrote:
> We're putting up a KP Performance KPPA-900DP-90S for use with the 900
> MHz 450i APs. How much down tilt would you use to serve customers up to
> 7 miles away? It has zero electrical down tilt
>
We're putting up a KP Performance KPPA-900DP-90S for use with the 900
MHz 450i APs. How much down tilt would you use to serve customers up to
7 miles away? It has zero electrical down tilt