Re: [AFMUG] ptp 450 revisited

2016-04-30 Thread Sean Heskett
Yes you can, but I'd actually recommend 14.1.2(build 10) instead of 14.1.1. Or just wait a cpl weeks for the actual 14.1.2 release. -Sean On Thursday, April 28, 2016, Jerry Head wrote: > Can one upgrade directly to 14.1.1 from 13.4? > >

[AFMUG] ptp 450 revisited

2016-04-28 Thread Jerry Head
Can one upgrade directly to 14.1.1 from 13.4?

Re: [AFMUG] ptp 450 firmware

2016-04-25 Thread David
14.1.1 is what we are running now. no issues thus far On 04/25/2016 01:01 PM, Jerry Head wrote: What is the best, most stable version to run on these?

[AFMUG] ptp 450 firmware

2016-04-25 Thread Jerry Head
What is the best, most stable version to run on these?

[AFMUG] ptp 450 focus ring

2014-12-22 Thread Jerry Head via Af
Is there a part number for this item? I am pretty sure the number listed on WBMFG's site is incorrect"SLH-58EPMP" is what is listed... Thanks in advance!

Re: [AFMUG] PTP 450 question

2014-12-19 Thread Chuck McCown via Af
Yes and if you add a focus ring you will get about 2 dB more. -Original Message- From: Gino Villarini via Af Sent: Friday, December 19, 2014 3:13 PM To: Subject: Re: [AFMUG] PTP 450 question Yes, you need to reaim the dish a bit Gino A. Villarini @gvillarini On Dec 19, 2014, at

Re: [AFMUG] PTP 450 question

2014-12-19 Thread Bill Prince via Af
Should work. PTP450 radios are the same form factor as PMP450 radios (and PMP430 and PTP230, etc.) -- bp On 12/19/2014 2:05 PM, Jerry Head via Af wrote: Please forgive me if this has been rehashed 1000 times, but I am going to ask anyway. I have a 5Ghz ptp 230 link using WBMFG RCL-1 reflect

Re: [AFMUG] PTP 450 question

2014-12-19 Thread Matt via Af
> Please forgive me if this has been rehashed 1000 times, but I am going to > ask anyway. > I have a 5Ghz ptp 230 link using WBMFG RCL-1 reflectors. > I might like to upgrade the link, can I just swap the ptp 450 for the 230? > > Thanks in advance... No sync over power anymore with PTP450. ;<(

Re: [AFMUG] PTP 450 question

2014-12-19 Thread Gino Villarini via Af
Yes, you need to reaim the dish a bit Gino A. Villarini @gvillarini > On Dec 19, 2014, at 6:06 PM, Jerry Head via Af wrote: > > Please forgive me if this has been rehashed 1000 times, but I am going to ask > anyway. > I have a 5Ghz ptp 230 link using WBMFG RCL-1 reflectors. > I might like to

Re: [AFMUG] PTP 450 question

2014-12-19 Thread Sean Heskett via Af
i don't see why not. On Fri, Dec 19, 2014 at 3:05 PM, Jerry Head via Af wrote: > Please forgive me if this has been rehashed 1000 times, but I am going to > ask anyway. > I have a 5Ghz ptp 230 link using WBMFG RCL-1 reflectors. > I might like to upgrade the link, can I just swap the ptp 450 for

[AFMUG] PTP 450 question

2014-12-19 Thread Jerry Head via Af
Please forgive me if this has been rehashed 1000 times, but I am going to ask anyway. I have a 5Ghz ptp 230 link using WBMFG RCL-1 reflectors. I might like to upgrade the link, can I just swap the ptp 450 for the 230? Thanks in advance...

[AFMUG] PTP 450 now supported in LINKPlanner

2014-11-26 Thread Bruce Collins via Af
LINKPlanner Release V4.2.0 was just posted. The main feature of this release is the addition of PTP 450 in both 5GHz and 3GHz. There are a couple new PMP features as well: * For PMP 450 we have added high level throughput to the AP Performance Summary (in effect this gives the same lev

[AFMUG] PtP 450

2014-11-10 Thread Jason Petrillo via Af
Anyone out there running a PtP 450 link at 20+ miles with any success? Any frequency counts. :) Thanks, Jason

Re: [AFMUG] ptp 450

2014-10-22 Thread Bill Prince via Af
I loaded 13.2 build 34 on ours, and it seems to be working fine. bp On 10/22/2014 6:20 PM, Ryan Mano via Af wrote: does anyone have firmware 13.1.4 for ptp 450?...its not on cambium support page only beta 13.2 thanks

Re: [AFMUG] ptp 450

2014-10-22 Thread Aaron Schneider via Af
ailto:aa...@cambiumnetworks.com>) for help to understand why you need this firmware. Thanks -Aaron From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano via Af Sent: Wednesday, October 22, 2014 8:21 PM To: af@afmug.com Subject: [AFMUG] ptp 450 does anyone have firmware 13.1.4 for ptp 450?...its not

[AFMUG] ptp 450

2014-10-22 Thread Ryan Mano via Af
does anyone have firmware 13.1.4 for ptp 450?...its not on cambium support page only beta 13.2 thanks

Re: [AFMUG] ptp 450 timing

2014-10-19 Thread Forrest Christian (List Account) via Af
Ptp450 needs timing port not power port timing. You're going to have to run a sync wire. I recommend using the same sync receiver for both the timing and power port sync. This either means using a syncpipe deluxe, a syncbox 12, or cabling it with a specially wired cable to the syncpipe output

Re: [AFMUG] ptp 450 timing

2014-10-19 Thread George Skorup (Cyber Broadcasting) via Af
It's just an SM, there are no sync over power components, timing port only. On 10/19/2014 2:32 PM, Ryan Mano via Af wrote: any one tried to get ptp 450 working through a packetflux? I see when looking under sync status it says Power Port Not Supportedits going to really suck if I cant get

Re: [AFMUG] ptp 450 timing

2014-10-19 Thread Bill Prince via Af
We just put up a PTP450. We're running it along side a couple of PMP450 APs, but needed to use a separate Syncpipe parasitic to provide timing. I don't understand why it won't take sync over power; it would have been a lot simpler to hook it up. bp On 10/19/2014 12:32 PM, Ryan Mano via Af w

[AFMUG] ptp 450 timing

2014-10-19 Thread Ryan Mano via Af
any one tried to get ptp 450 working through a packetflux? I see when looking under sync status it says Power Port Not Supportedits going to really suck if I cant get this working thanks