The spec sheet shows ePMP sync radios accept supplies as low as 23V.
I am currently running 24V systems with ePMP non-sync radios. Does anyone
run 24V systems with ePMP sync radios? My Mikrotik 750UP and 750P outputs
measure only 23.5V, so I'd expect very little room for losses.
I want to try som
My main site is 8x ePMP 24v with SynInjectors. I'm doing 24v but the
distance from the SyncInjector to radio is tops 60 feet of cat5.
20v is when they won't boot.
If your runs are 100-200 feet I doubt you'll lose 3.5 volts. I'm not sure
what kind of amperage capacity the 750p has, though.
Josh
is your syncinjector providing sync reliably? Ours were dropping sync alot
from the injector, with hld off time it wasnt impacting, but I switched to
gps sync anyway
On Tue, Dec 15, 2015 at 1:31 PM, Josh Luthman
wrote:
> My main site is 8x ePMP 24v with SynInjectors. I'm doing 24v but the
> dis
Never had any issues with it, roughly 13 months now. Using GIGE-APC-HV
surge.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Dec 15, 2015 at 2:37 PM, That One Guy /sarcasm <
thatoneguyst...@gmail.com> wrote:
> is your syncinjector providi
The spec sheet for the RB 750P (PowerBox) says maximum power output is 1 A
on a port (Maximum total of 2 A). The ePMP shouldn't draw more than 0.5 A,
so things are looking good.
Thank you. I'll pick one up and try it out.
On Tue, Dec 15, 2015 at 2:31 PM, Josh Luthman
wrote:
> My main site is 8
Iirc they're 7 watts at 24v? So like 350ma each.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 15, 2015 6:12 PM, "Christopher Gray"
wrote:
> The spec sheet for the RB 750P (PowerBox) says maximum power output is 1 A
> on a port (Maximum to
It'll work fine - we have lots of ePMP running off of RB750UPs, but you
might want to use a slighter higher voltage power supply... I usually run
them on a Meanwell AD155b or DRC100B, set to around 27v.
On Tue, Dec 15, 2015 at 5:12 PM, Christopher Gray <
cg...@graytechsoftware.com> wrote:
> The s
