Looks like REV D is the one you want.
From: Brandon Yuchasz
Sent: Wednesday, February 22, 2017 7:29 AM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP and Packet Flux configuration settings. (UPDATE)
Thanks everyone for the feedback.
Chuck, I will check the version of the GIGE-APC. Although when
settings. (UPDATE)
I would check the rev of the GIGE-APC card. Older cards did not play well with
ePMP sync over power.
From: Brandon Yuchasz
Sent: Tuesday, February 21, 2017 7:39 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP and Packet Flux configuration settings. (UPDATE)
Forest
I would check the rev of the GIGE-APC card. Older cards did not play well with
ePMP sync over power.
From: Brandon Yuchasz
Sent: Tuesday, February 21, 2017 7:39 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP and Packet Flux configuration settings. (UPDATE)
Forest,
Thanks for the reply. I
Behalf
Of *Forrest Christian (List Account)
*Sent:* Tuesday, February 21, 2017 5:02 AM
*To:* af
*Subject:* Re: [AFMUG] ePMP and Packet Flux configuration settings. (UPDATE)
It sounds like you covered all of your bases, especially since you plugged
the ePMP radio in where the 450i was and it d
back but like I said it could be a few weeks.
Thanks Brandon
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Forrest
Christian (List Account)
*Sent:* Tuesday, February 21, 2017 5:02 AM
*To:* af
*Subject:* Re: [AFMUG] ePMP and Packet Flux configuration settings.
(UPDATE)
It sounds like yo
Account)
Sent: Tuesday, February 21, 2017 5:02 AM
To: af
Subject: Re: [AFMUG] ePMP and Packet Flux configuration settings. (UPDATE)
It sounds like you covered all of your bases, especially since you plugged the
ePMP radio in where the 450i was and it didn't work.So some of the ones
It sounds like you covered all of your bases, especially since you plugged
the ePMP radio in where the 450i was and it didn't work.So some of the
ones below don't seem to apply:
What voltage are you running the injector at?
How much cable length are you running?
The ePMP radios reallly are p
So to update this previous post. Went to the site and confirmed that yes we
were getting the blinking sync light on the SyncInjector feeding the ePMP
APs, I logged into the AP that did not have GPS and set it to use the CMM3.
Rebooted and no joy still no GPS. Frustrated I ended up unplugging the c