On 5/17/24 06:29, Marco Gaiarin wrote:
I'm still fiddling with LTO9 and backup performances; finally i've managed
to test a shiny new server with an LTO9 tape (library indeed, but...) and i
can reach with 'btape test' 300MB/s, that is pretty cool, even if IBM
specification say that the tape
On 5/9/24 10:02, Marco Gaiarin wrote:
I've setup some backup jobs for some (mostly windows) client computer; i
mean 'client' as 'not always on'.
...
2) There's some way i can get the 'jobs in volume X'? I can query jobs for
volume, but i've not found a way to query volumes for jobs
I use
Why not migrate the LTO-2 volumes to disk, then install whatever version
of tape drive you wish and migrate the disk volumes to the new LTO tapes?
On 4/22/24 11:29, Gary R. Schmidt wrote:
On 23/04/2024 00:58, Alan Polinsky wrote:
I have used Bacula for many years, since version 5. In the
Nothing against fail2ban, which is quite good at mitigating brute force
and dictionary attacks against password protection, but for opening Dir
to the public internet, I would most definitely suggest looking into
using TLS certificates issued by your own private CA instead.
On 4/2/24 19:05,
I have found the problem. See below.
On 4/2/24 05:33, Marco Gaiarin wrote:
Mandi! Josh Fisher via Bacula-users
In chel di` si favelave...
This is the Easter weekend in italy, so backup will fail in most of my
sites; i'm enabling debug for sites, i'll come back here on monday...
When
On 3/28/24 09:30, Marco Gaiarin wrote:
I can't explain that, unless the volumes that are in changer, those
assigned to a slot > 0, are not getting their current slot set to zero
when the magazine is ejected.
Exactly.
This is the Easter weekend in italy, so backup will fail in most of my
On 3/21/24 16:36, Marco Gaiarin wrote:
Mandi! Josh Fisher via Bacula-users
In chel di` si favelave...
'Log Level = LOG_DEBUG' in the vchanger.conf file. That will log everything
'log level = 7', do you mean, right?
Yes. The configuration parser will also understand "LOG_DEBUG&q
On 3/19/24 08:31, Marco Gaiarin wrote:
Mandi! Josh Fisher via Bacula-users
In chel di` si favelave...
This Looks like the volume is marked as being in a slot in the bacula
catalog, but the RDX cartridge containing that volume is not actually
mounted. This can happen if a cartridge
On 3/18/24 14:36, Bill Arlofski via Bacula-users wrote:
This is in response to Josh...
In my experience, with RDX, the docking bay itself shows up as a
device... (/dev/usbX or /dev/sdX, I forget)
But plugging/unplugging an RDX cartridge does not notify the kernel in
any way, so udev
On 3/15/24 12:28, Marco Gaiarin wrote:
Following the hint on:
https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/issues/2683
i (re)post here, seeking feedback.
Situation: bacula 9.4 (debian buster), using RDX cassette/disks for backup,
using the wonderful
On 1/24/24 12:48, Marco Gaiarin wrote:
My new IBM LTO9 tape unit have a data sheet performace of:
https://www.ibm.com/docs/it/ts4500-tape-library/1.10.0?topic=performance-lto-specifications
so on worst case (compression disabled) seems to perform 400 MB/s on an LTO9
tape.
On 11/29/23 05:47, MylesDearBusiness via Bacula-users wrote:
Hello, Bacula experts.
Due to message length limitations of this mailing list, I have been
unable to post the majority of necessary details, which is why I was
using my github gist system to store, apologies for the confusion or
On 11/8/23 13:32, Martin Simmons wrote:
On Wed, 8 Nov 2023 11:09:44 -0500, Josh Fisher via Bacula-users said:
On 11/7/23 19:26, Lionel PLASSE wrote:
I’m sorry but no wi-fi nor 5G in our factory, and don't use my phone too to
backup my servers :) .
I was talking about ssh (scp) transfer just
st regards
PLASSE Lionel | Networks & Systems Administrator
221 Allée de Fétan
01600 TREVOUX - FRANCE
Tel : +33(0)4.37.49.91.39
pla...@cofiem.fr
www.cofiem.fr | www.cofiem-robotics.fr
-Message d'origine-----
De : Josh Fisher via Bacula-users
Envoyé : mardi 7 novembre 2023 18:01
À
On 11/7/23 04:34, Lionel PLASSE wrote:
Hello ,
Could Encryption have any impact in my problem.
I am testing without any encryption between SD/DIR/BConsole or FD and it seems
to be more stable. (short sized job right done , longest job already running :
750Gb to migrate)
My WAN connection
On 9/29/23 06:07, Marco Gaiarin wrote:
Mandi! Josh Fisher via Bacula-users
In chel di` si favelave...
I'm really getting mad. This make sense for the behaviour (the first
VirtualFull worked because read full and incremental for the same pool) but
still the docs confuse me.
https
On 9/26/23 12:48, Marco Gaiarin wrote:
Mandi! Rados??aw Korzeniewski
In chel di` si favelave...
Because of this. To make Virtual Full Bacula needs to read all backup jobs
starting from Full, Diff and all Incrementals. Your Full (as volume
suggests) is stored on Obito_Full_0001 which has
On 9/14/23 15:35, Rob Gerber wrote:
Bacula is transferring data at a fraction of the available link speed.
I am backing up an SMB share hosted on a fast NAS appliance. The share
is mounted on the bacula server in /mnt/NAS/sharename. I have
dedicated 10gbe copper interfaces on the NAS and the
On 8/25/23 12:06, Martin Simmons wrote:
On Thu, 24 Aug 2023 15:51:18 -0400, Josh Fisher via Bacula-users said:
Probably you have compression and/or encryption turned on. In
that case, Bacula cannot simply fseek to the offset. It has to
decompress and/or decrypt all data in order
On 8/24/23 05:32, Lionel PLASSE wrote:
Hello,
For usb harddrive and file media volume, when I do a restore job I get a long waiting step :
"Forward spacing Volume "T1" to addr=249122650420"
I remember I managed to configure the storage resource to quickly restore sdd
drives.
Should I
On 5/17/23 14:14, Phil Stracchino wrote:
On 5/17/23 12:52, Marco Gaiarin wrote:
I've LTO tape that work in very dusty environment by at least 6 years.
Istead of dust, i've found that setting properly spooling and buffers
prevent the spinup/spindown effect, that effectively can be very
I would add that this problem appears to occur when all in-changer tapes
are unavailable due to volume status AND the job's pool does contain
available tapes, but those tapes are not in-changer. Bacula will attempt
to load a tape that is not in-changer, where it should send an operator
On 3/22/23 13:29, Bill Arlofski via Bacula-users wrote:
On 3/22/23 10:23, Mark Guz wrote:
Hi,
I'm trying to get virtual full backups working. I'm running 13.0.2.
The differentials are being backed-up to a tape library in 1 location
which is not usually manned, so I'm trying to get the
On 12/19/22 04:55, Marco Gaiarin wrote:
Mandi! Josh Fisher
In chel di` si favelave...
Does the firewall on sdpve2.sd.lnf.it allow connections on TCP 9103? Is
there an SD process on sdpve2.sd.lnf.it listening on port 9103? You can try
to 'telnet sdpve2.sd.lnf.it 9103' command from the
On 12/15/22 04:37, Marco Gaiarin wrote:
Mandi! Josh Fisher via Bacula-users
In chel di` si favelave...
Also, you have tried using 'umount' and 'update slots' in bconsole, but
did you try the 'mount' command? It is the mount command that would
cause bacula-dir to choose a volume and invoke
On 12/12/22 10:47, Marco Gaiarin wrote:
I'm using 'vchanger' script defining some virtual changer.
I don't see that Dir is reporting any errors invoking vchanger, no
timeouts or vchanger errors, but are there any vchanger processes still
running? The vchanger processes should be very short
On 11/2/22 14:13, Marco Gaiarin wrote:
Mandi! Marco Gaiarin
In chel di` si favelave...
Pool definition:
Pool {
Name = VDMTMS1FilePool
Pool Type = Backup
Volume Use Duration = 1 week
Recycle = yes # Bacula can automatically
On 10/18/22 17:51, Bill Arlofski via Bacula-users wrote:
Hello Josh (everyone else too),
I can confirm that if the FD --> DIR connection is opened, then the
Director does use this socket to communicate to the FD.
Excellent!
However, the "Connecting to Client..." message does not change,
On 10/17/22 20:09, Bill Arlofski via Bacula-users wrote:
On 10/17/22 13:14, Rodrigo Reimberg via Bacula-users wrote:
>
Telnet from DIR to FD on port 9102 not ok, I’m using
ConnectToDirector parameter.
Hello Rodrigo,
Of course this will not work. The client is behind NAT, and the
Director
On 10/16/22 12:21, Marco Gaiarin wrote:
Mandi! Radosław Korzeniewski
In chel di` si favelave...
...
I do not understand your requirements. What is an "initial backup" you want to
make? Are you referring to the first Full backup which has to be executed on
the client?
Exactly. VirtualFull
On 10/16/22 11:44, Rodrigo Reimberg via Bacula-users wrote:
Hello,
Can someone help me?
I did the configuration of the client behind nat.
The client is communicating with the director as there is no error in
the "working" directory.
When I access bconsole in the director and run the
On 10/12/22 15:10, Robert M. Candey wrote:
I've been using Bacula to back up many servers and desktops to a tape
library since early on, but always had one server running all of the
Bacula processes except for the individual file servers.
I'm setting up a new tape library and have new data
The volumes have been purged from the catalog, so thecatalog needs to be
rebuilt using the bscan utility. See
https://www.bacula.org/13.0.x-manuals/en/utility/Volume_Utility_Tools.html#SECTION00172
On 9/9/22 07:02, Charles Tassell wrote:
Hello Everyone,
I'm having a problem
I don't think it can be done by USB. The SAS-to-USB chips operate in
"mass storage" mode, suitable for SAS hard drives. The LTO drive will
need an adapter that operates in SCSI emulation mode. I don't know of
any adapters that aren't strictly for hard drives, but maybe there are.
Another
34 matches
Mail list logo
