Hi All,
Has anyone tried debugging this issue with techniques like the one
described here:
http://community.kde.org/Printing/Developer_Tools
Cheers,
Debuser
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
--
To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1270281807.1958.0.ca...@slav-desktop
On 2010-01-31 13:43, Sthu Deus wrote:
2010-01-31 13:31:03 GMT-7 LOG: could not bind IPv4 socket: Address already
in use
2010-01-31 13:31:03 GMT-7 HINT: Is another postmaster already
running on port 5432? If not, wait a few seconds and retry.
2010-01-31 13:31:03 GMT-7 WARNING: could not
After running X for a few hours, the xorg server starts to use around
20% of the CPU. Is that not rather high? The computer is a laptop
running sid.
Here is an extract from a typical htop display (formatted to make it
less wide), sorted by CPU usage:
CPU[|||
Извините, второй раз письмо отправилось ошибочно.
В Пнд, 09/11/2009 в 23:53 +0700, debuser пишет:
Этот журнал посвящен Ubuntu (а значит и Debian) и open source. На его
страницах вы найдете новости, руководства и обучающие статьи.
В 27-м выпуске вы найдёте:
* Новости
* Покоряй и властвуй
Этот журнал посвящен Ubuntu (а значит и Debian) и open source. На его
страницах вы найдете новости, руководства и обучающие статьи.
В 27-м выпуске вы найдёте:
* Новости
* Покоряй и властвуй
* How-to
— Программа на Python – часть 1
— Inkscape – часть 4
— Сканирование документов в PDF/DJVU
—
Этот журнал посвящен Ubuntu (а значит и Debian) и open source. На его
страницах вы найдете новости, руководства и обучающие статьи.
В 27-м выпуске вы найдёте:
* Новости
* Покоряй и властвуй
* How-to
— Программа на Python – часть 1
— Inkscape – часть 4
— Сканирование документов в PDF/DJVU
—
В Срд, 02/09/2009 в 09:20 +0400, Mishustin Alexey пишет:
9/2/2009, debuser debu...@yandex.ru вы писали:
Выбираем письмо, жмем прав кнопку мыши - Создать правило из сообщения -
Фильтр по получателям , в качестве действия выбрать переместить в папку
(указать нужную).
А вот как применить это
В Срд, 02/09/2009 в 03:27 +0400, Nikolay Semikin пишет:
Доброго времени суток all.
А как в Evolution сделать так что бы от второй учетной записи почта в
другую папку ложилась? А то все в одну кучу ложица.
Создать папку.
Затем создать фильтр (например по получателю).
Проще всего сделать на
Такая проблема.
Есть только что созданное chroot окружение через debootstrap.
Например, если ставить пакет console-data (вроде так наз-ся) с помощью
apt-get install console-data
то пакет загружается, распаковывается и появляется интерактивный диалог
по выбору значения для этого пакета.
Задача в
если я правильно понимаю, apt-get идет в репозиторий при указании пакета
для apt-get build-dep
например,
#apt-get build-dep coreutils
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to find a source package for coreutils
Good day.
There is a chroot (debootstrap lenny crush-lenny/). I installed there
emdebian-tools emdebian-rootfs as well.
I wrote a simple bash script which parses a dsc file, gets necessary
depends from it, installs it using apt-cross and tries to build crush
arm package.
For tests I use acl
есть файлы:
package.dsc
package.diff.gz
package.orig.tar.gz
выполняю dpkg-source -x package.dsc
захожу с создавшийся каталог package
там есть файл 'debian/control'
и строчка:
Build-Depends: много пакетов(впринципе эта же строчка и в dsc
файле есть)
какой командой можно установить эти
подскажите такой вопрос:
я пишу скрипт для сборки deb пакетов в chroot окружении:
т.е. создается chroot окружение
туда запихивается исходники
и запускается команда на сборку debuild
примерно так:
debootstrap lenny lenny-chroot/
cp source files lenny-chroot/tmp
LANG=C chroot lenny-chroot/
В Вск, 09/08/2009 в 19:59 +0100, Neil Williams пишет:
On Sun, 09 Aug 2009 23:51:42 +0800
debuser debu...@yandex.ru wrote:
/usr/share/emdebian-tools/emdebian.buildd
This file is out of date - some packages have transitioned to new
SONAMEs, so libfoo1 has become libfoo2. Work out the new
I try to use an emdebian tools in new and clean distr (sid) using
chroot.
I used a debootstrap with variant=buildd to build base system.
After that I installed a emdebian tools in chroot.
The I installed binutils-arm-linux-gnu cpp-4.3-arm-linux-gnu g
++-4.3-arm-linux-gnu gcc-4.3-arm-linux-gnu-base
I try to make a chroot for cross-compiling:
# empdebuild --create
Building i386 chroot on i386 to cross-build arm packages.
Checking for a user writeable tree in /work/pbuilder/build
- running debootstrap
DEBOOTSTRAP_DIR=/usr/share/debootstrap/ debootstrap --verbose
unstable /work/pbuilder/build
I try to build at for arm using cross compile utils.
parsetime.y: In function ‘parsetime’:
parsetime.y:510: warning: implicit declaration of function ‘panic’
parsetime.y: At top level:
parsetime.y:10: warning: ‘svnid’ defined but not used
flex -i parsetime.l
arm-linux-gnu-gcc -c -g -O2
В Втр, 28/07/2009 в 09:51 +0200, Bernhard Reutner-Fischer пишет:
On Tue, Jul 28, 2009 at 02:12:13PM +0800, debuser wrote:
I try to build at for arm using cross compile utils.
parsetime.y: In function ‘parsetime’:
parsetime.y:510: warning: implicit declaration of function ‘panic
В Втр, 28/07/2009 в 06:22 +0100, hadi motamedi пишет:
Dear All
Can you please let us know what is the required service that needs to
be enabled on the Debian server to allow for Remote Desktop Connection
opened from the MS Windows client's side ?
Regards
H.Motamedi
As I know it's
http://en.wikipedia.org/wiki/Virtual_Network_Computing
В Втр, 28/07/2009 в 06:40 +0100, hadi motamedi пишет:
Thank you for your reply . Can you please provide me with more details
on your proposed NX, VNC ?
Regards
H.Motamedi
On Tue, Jul 28, 2009 at 6:33 AM, debuser debu
В Птн, 24/07/2009 в 16:13 +0400, Dmitry Agafonov пишет:
24 июля 2009 г. 16:05 пользователь Алексей Тихон
tihon.alek...@mail.ru написал:
Всем привет! напишите одну простенькую программу для
Python! )))
-8--
#!/usr/bin/python
print Hello,
I've a crush unstable local repository.
There are source and binary arm packages there.
Host system is i386. I try to cross compile a package from source to arm
architecture.
For instance, packages is at.
There are following files:
at_3.1.10.2em1_arm.build at_3.1.10.2em1.dsc
# emsetup
Checking for suitable apt sources.
Updating main system apt cache (enter your sudo password if prompted).
Hit http://ftp.de.debian.org lenny Release.gpg
Ign http://ftp.de.debian.org lenny/main Translation-en_US
Ign http://ftp.de.debian.org lenny/contrib Translation-en_US
Ign
Здравствуйте.
В процессе компиляции получаю следующую ошибку:
/usr/lib/gcc/arm-linux-gnu/4.3.3/../../../../arm-linux-gnu/bin/ld:
cannot find -lfl
collect2: ld returned 1 exit status
make[1]: *** [at] Error 1
make[1]: Leaving directory `/tmp/at/at-3.1.10.2em1'
make: *** [build] Error 2
Ребят, не отвечайте больше на эту тему пожалуйста.
James Brown просто издевается :)
В Птн, 24/07/2009 в 01:09 +0400, James Brown пишет:
Ivan Petrov wrote:
gavenko пишет:
есть ссылка на открытые/бесплатные словари:
http://gnome.msiu.ru/stardict.php
Вопрос в том, насколько они
I've got tar file with crush rootfs.
I extract it and try to chroot.
In manual:
SHELL variables
Note that the Debian chroot program from coreutils expects you to want
the same shell outside the chroot as you want to use inside the chroot.
The typical Debian default shell in /etc/passwd is bash
В Срд, 22/07/2009 в 19:09 +0400, James Brown пишет:
Какой выбрать пакет для его установки?
P.S. У меня стоит гномовский словарь 2.20.0.1, в нем только толковый
словарь английского языка.
P.P.S. Было бы совсем неплохо, если бы была возможность перевода с
русского на другие языки и наоборот (в
В Срд, 22/07/2009 в 20:37 +0400, James Brown пишет:
debuser wrote:
В Срд, 22/07/2009 в 19:09 +0400, James Brown пишет:
Какой выбрать пакет для его установки?
P.S. У меня стоит гномовский словарь 2.20.0.1, в нем только толковый
словарь английского языка.
P.P.S. Было бы совсем
В Срд, 22/07/2009 в 21:14 +0400, James Brown пишет:
debuser wrote:
В Срд, 22/07/2009 в 20:37 +0400, James Brown пишет:
debuser wrote:
В Срд, 22/07/2009 в 19:09 +0400, James Brown пишет:
Какой выбрать пакет для его установки?
P.S. У меня стоит гномовский словарь
В Срд, 22/07/2009 в 21:37 +0400, James Brown пишет:
А куда конкретно их записывать:
/usr/bin/stardict /usr/lib/stardict /usr/lib64/stardict
/usr/share/stardict /usr/share/man/man1/stardict.1.gz
Понятно, что не в usr/bin и не в мануалы, а вот куда из трех
оставшихся?
Там в настройках
я думаю он просто тролит
--
To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I'd like to build a crush rootfs on the flash card.
I created an image.
Run command:
emsandbox -a arm
and I got emdebian-arm.tgz
After I mounted the image to flash dir.
Then I extracted emdebian-arm.tgz to the flash dir.
As I've read in docs:
Immediately after unpacking, start the package
I'd like to build a crush rootfs on the flash card.
I created an image.
Run command:
emsandbox -a arm
and I got emdebian-arm.tgz
After I mounted the image to flash dir.
Then I extracted emdebian-arm.tgz to the flash dir.
As I've read in docs:
Immediately after unpacking, start the package
Hi!
I used emsandbox to make a crush rootfs.
How can I install linux-image deb package into it (and other deb
packages)? I could not manage even chroot the rootfs ...
--
To UNSUBSCRIBE, email to debian-embedded-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
I have an emdebian grip mirror and I'd like to build all packages from
sources.
Arch: i386
I use emdebuild -a i386 for that.
For example, I'm trying to build a a2ps_4.14 package.
After the process is finished I have a2ps_4.14-1em1_i386.deb,
but it's size is 675740 when the size of a2ps_4.14
В Втр, 30/06/2009 в 10:42 +0400, Andrej Rzhavskov пишет:
* Mikhail A Antonov b...@solarnet.ru [Mon, 29 Jun 2009 22:19:31
+0400]:
-[ debuser 29/06/2009 21:29 (GMT +3)
...
Когда я пытаюсь отмантировать образ, то получаю
предупреждение
В Пнд, 29/06/2009 в 22:19 +0400, Mikhail A Antonov пишет:
-[ debuser 29/06/2009 21:29 (GMT +3)
...
Когда я пытаюсь отмантировать образ, то получаю предупреждение:
#umount flash/
umount: /home/debuser/work/flash: device is busy.
(In some cases useful info about processes
В Втр, 30/06/2009 в 20:24 +0400, Pavel Ammosov пишет:
On Tue, Jun 30, 2009 at 01:29:18AM +0800, debuser wrote:
Я ищу по процессам и вижу что пара процессов до сих пор привязана к этому
образу:
#fuser -m /home/debuser/work/flash
/home/debuser/work/flash: 2832rce 8811rce
Если я сделаю
В Втр, 30/06/2009 в 21:14 +0400, Alexander Galanin пишет:
On Wed, 01 Jul 2009 00:57:48 +0800
debuser debu...@yandex.ru wrote:
Перед тем как их убивать стоит просто посмотреть на процессы.
ps -p 2832 8811
Может просто vi был забыт в углу консоли.
Просто открывается образ, делается
скачиваются и настраиваются.
После завершения процесс я выхожу из chroot.
Теперь у меня есть образ флешки с sid. Теперь самое интересное.
Когда я пытаюсь отмантировать образ, то получаю предупреждение:
#umount flash/
umount: /home/debuser/work/flash: device is busy.
(In some cases useful
В Пнд, 29/06/2009 в 20:05 +0400, Mihail Vasilev пишет:
Товарищи, а у меня одного ссылки на http://www.debian.org/CD/ не работают?
http://cdimage.debian.org/debian-cd/5.0.2/i386/bt-dvd/
Not Found
The requested URL /debian-cd/5.0.2/i386/bt-dvd/ was not found on this server.
Apache/2.2.9
try to umount dir 'flash' I get:
#umount flash/
umount: /home/debuser/work/flash: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
I do and get:
#fuser -m /home/debuser/work/flash
/home/debuser/work/flash: 2832rce
8/10/06, DebUser[EMAIL PROTECTED] escribió:
hola a todos!
alguien tiene idea de como impedir que se muestren los dominios
alojados en
un servidor?
tengo debian sarge 3.1 y recientemente he instalado el ispconfig para
administrar las webs, si voy a una web tipo
http://whois.webhosting.info
hola a todos!
alguien tiene idea de como impedir que se muestren los dominios alojados en
un servidor?
tengo debian sarge 3.1 y recientemente he instalado el ispconfig para
administrar las webs, si voy a una web tipo
http://whois.webhosting.info/xx.xx.xx.xx y donde estan las x pongo una
ip, me
In-reply-to:
[EMAIL PROTECTED]
I'm almost certain that the 40-second delay reported
in the previous message is due to tcpwrappers trying
to do redundant reverse DNS lookups.
I rebuilt exim from the version 3.36 source (same
version Debian has on Sarge). It does have a build
option for using
I am investigating a problem on my LAN - some
operations seemed very slow.
There are 3 machines on the LAN. Two (leo.galaxy and
orion.galaxy) are only connected to the LAN. The third
(ursa.galaxy) is the firewall/gateway and also has a
connection thru a cable modem to the internet.
The test: on
Currently on my system I have the following email setup:
I am a RaodRunner cable user at home but have never actually used
their email address/servers because I work for a small ISP (dial-
up only) and use ours from habit and the convenience of
maintaining my email addresses myself with remote
I have one of the Esoniq Sound cards listed in the drivers setup when
you first install debian. I realized this after the fact, however.
What is the easiest / best way to go about installing this driver for my
sound card?
I have a Linux machine (Debian unstable with kernel 2.2.18) that is
successfully masquerading for our local network. I want to do port
forwarding so that machines on the Internet can see the web server of a
machine on the local net. Following the IP-Masquerading howto, I have the
following script
Never mind. Found my problem. My problem was with the machine running the
web server inside the local network, not with the firewall machine.
On Wed, 13 Jun 2001 [EMAIL PROTECTED] wrote:
I have a Linux machine (Debian unstable with kernel 2.2.18) that is
successfully masquerading for our local
It sounds as though you do indeed have a memory leak somewhere rather than
just a misunderstanding of the memory statistic numbers. However, I'm
quite certain that the problem has nothing to do with the kernel, but
rather a leak in one of the apps you are running. If you say that even
after
I had the same problem which was solved by turning off Plug and Play OS
Support (or something like that) in the BIOS. Worked like a charm after
that. I got the info from somewhere on the website listed for the
driver. More information is there if that doesn't solve the problem (look
in the docs
First install a ssh1 package (I think the ssh package is it), then do
the following (from /usr/share/doc/ssh2/SSH2.QUICKSTART.gz):
Then add the following 2 lines to ssh2_config placed at the same directory
of sshd2_config. With this configuration, ssh2 client will invoke ssh1
client when
I'm not sure Nvidia's drivers work at 24bpp, so you might want to try
running at 16bpp. Also, you did remember to change the driver in your
XF86Config (or XF86Config-4 if that file exists on your system) file to be
nvidia rather than nv, right?
Gerry
On Mon, 26 Mar 2001, Remco Blaakmeer wrote:
home/end work fine for me in Eterm and xterm. I'm running unstable. I
think the problem may be with your keyboard or X settings rather than with
the terminal emulator. Someone on here can probably give you more specific
places to look. I think there's a keyboard mini-howto. That might help.
gerry
Upon further investigation, I believe I found what makes home/end
work with xterm and Eterm on my system. In /etc/X11/app-defaults/Xterm,
the bottom of the file contains the following:
*VT100.Translations: #override ~Shift ~Ctrl ~Meta KeyDelete:
string(\033[3~)\n\
Strictly speaking, you don't need an OpenGL-complient card to run or
develope OpenGL programs. They will run on any graphics card if you have
the libraries installed (Mesa on Linux). But if you need your app to run
really fast, then you'll want to get an OpenGL-complient card. Sorry, but
I don't
You need Windows in order to run win apps under Wine.
Now the problem seems to be that when I try to install Windows apps,
they look for Windows files that WINE does not yet have, and point to
where they can be obtained at Microsoft's website. At least the
xlibosmesa errors are no longer a
You need xlibosmesa3, perhaps only available under unstable. I believe
the wine package incorrectly does not list this as a dependency.
On Mon, 19 Feb 2001, Leonard Leblanc wrote:
Has anyone had any experience with using wine? I am currently doing alot of
web development at work and _really_
I believe with X4, all the drivers are contained in the xserver-xfree86
package rather than having card-specific servers as with X3. You don't
need xserver-svga anymore.
On Tue, 13 Feb 2001, Peter S Galbraith wrote:
After my upgrade to testing, I noticed that I'm still using
xserver-svga
If I restrict access of a webserver (Apache) to certain domains or IP
addresses, I was wondering how secure this is. In other words, how easy
would it be for someone to fake where they are coming from to gain access
to my site?
Thanks,
Gerry
I asked this a week or so ago, but it was a day that the mailing list was
having trouble, so I wonder if many people received it. So, I'm asking
again. My apologies to those who got it the first time.
Is it legal to use mod-ssl (or apache-ssl) in the US for commercial
purposes? I've seen some
You need to recompile your kernel with advanced power management BIOS
support turned on. I think that's the only option you need (someone
correct me if I'm wrong). Your BIOS needs to support this as well (I
believe most modern BIOSs do).
Gerry
On Mon, 5 Feb 2001, Cameron Matheson wrote:
Hey,
Is it legal to use mod-ssl (or apache-ssl) in the US for commercial
purposes? I've seen some conflicting documentation on the matter (and it
seems like I heard laws changed regarding this recently as well???). Also,
is using mod-ssl or apache-ssl as secure as one of the secure commercial
apache
Perhaps your Sawfish stacking is set to be on top. Press
Alt+Middle_Mouse_Button when your pointer is over the play list window and
your sawfish menu should come up. Select Stacking-Lower and maybe
History-Forget saved state. Also make sure Options-Always on top is not
selected from the XMMS menu.
Is there an easy way to compile a Debian source package with debugging
options turned on (removing the -O2 and adding -g to all the make
files) or is that something that has to be done manually? Something like
dpkg-buildpackage --debug???
Thanks,
Gerry
Several years ago in Debian there was a program that created a bootable
floppy that would check for bad RAM. I can't find it now. I think it was
called memcheck, but I'm not certain on that. Does anybody know what I'm
talking about and where I can find it now?
Thanks,
Gerry
Thanks. I now see that this program is contained in the hwtools package
(in woody).
Thanks again,
Gerry
On Wed, 24 Jan 2001, Christoph Simon wrote:
On Wed, 24 Jan 2001 11:21:47 -0700 (MST)
[EMAIL PROTECTED] wrote:
Several years ago in Debian there was a program that created a bootable
Actually, I think it's just a minor bug in apt-get. I see it too even
though I'm not running hurd, it mentions hurd in brackets with the -s
option. I've never worried about it, since it provides the need
functionality - telling me what packages will be upgraded.
On Wed, 17 Jan 2001, Colin Watson
I'm trying to install lesstif-dev on my woody (testing) box. It says it
depends on xlib6g-dev but xlib6g-dev conflicts with xlibs which is already
installed and is required by other packages. I don't see an xlibs-dev
either. Where are the development packages for X (4.01) in woody now? Do
they
Uggh, they removed X4 from Woody? I'm not sure I like this testing
distribution thing. If I'm pointing at woody the whole time (which I
have), I don't expect packages to be rolled back unless something is
really wrong. So now that X has been removed from Woody, I must either
roll back to X3 also,
You contradict yourself - if you were tracking woody you were tracking
unstable. Since you were tracking unstable before I don't see why
it's such a big deal to track it now ...
Maybe it's not worth a discussion, but when I started using woody before,
the stability of this machine was much
You wouldn't have these problems if you would ignore the damn code names
and track the appropriate distribution. If you want to track unstable
point to unstable, not woody.
_Don't_ _use_ _code_ _names_.
But I did not want to track unstable, I wanted to track woody. That is, I
didn't want
I just setup a woody box to act as a masqerading firewall. Where is the
most Debian(woody) place to put my firewall configuration script to
be run a boot?
Thanks,
Gerry
Does anyone have any experience accessing MS SQL Server from Linux? Either
from C, Perl, or PHP? If so, what do I need in order to do this?
Thanks,
Gerry
Now that woody is in the testing stage, many of the packages on my system
are newer versions than currently reside in woody. As some of the newer
packages on my system are broken, I would like to roll back to the current
woody snapshot. Is there an easy way to do this?
Thanks,
Gerry
I have a sound blaster live soundcard. I previously had alsa working
properly with the alsa drivers from woody. However, I recompiled to a
newer kernel and so I needed to download the alsa source and recompile
that too. I tried the alsa source from woody package, but it was an older
version and
I've been following woody for some time. Today I tried:
apt-get install rpm
It fails with the following message:
Sorry, but the following packages have unmet dependencies:
rpm: Depends: librpm1 (= 3.0.3) but it is not going to be installed
Depends: librpm1 (= 3.0.2) but it is not going
More weirdness. When I downloaded rpm using ftp (rather than
apt-get) then did dpkg -i rpm... it worked fine. Hmm.
On Tue, 26 Dec 2000 [EMAIL PROTECTED] wrote:
I've been following woody for some time. Today I tried:
apt-get install rpm
It fails with the following message:
Sorry, but
I want Windows users on my network to be able to print to my printer
without a password. I have guest ok = yes in the printers share. I also
have security = user in the global section. Shouldn't this allow
printing without a password? Currently it does not. Printing does work
fine with a correct
In looking around some more, it looks like this is indeed the correct
behavior for security = user unless I add the following:
map to guest = Bad Password
or
map to guest = Bad User
Otherwise I need to switch to
security = share
Thanks,
Gerry
On Thu, 21 Dec 2000, Peter Horton wrote:
On
I want to set up printing (preferably using magicfilter) for an HP
Laserjet 5N. Since I don't see this printer listed in the magicfilter
setup, which one works best with this printer?
Thanks,
Gerry
What's the best way(s) to tell all the functions contained in a library
or object file (other than reading the man pages)?
Thanks,
Gerry
We need to send out an email response from a CGI when someone places an
order, but we want to set the from address to something other than the
user/machine where the CGI is running. How to do this with the various
email packages? Currently using exim, but may switch to postfix or
sendmail.
This doesn't work because helix is in the version number, not the package
name (except for about 3 packages). The matching seems only to match the
package name.
On Thu, 7 Dec 2000, Juergen Fiedler wrote:
apt-get takes regular expressions, so a 'apt-get --purge remove helix*'
should nuke
About a month ago when installing a new system, I tried installing the
Gnome that comes with Woody (I've been using Helix Gnome on other
systems). I saw some strange behavior, but perhaps it was because I didn't
have a lot of suggested packages installed at the time. And, although a
trivial thing,
I had a machine with this card as well. At the time I looked, the
documentation on xfree86.org said that this card is supported in the
developement version of X 4.?.?, but not currently supported in the
official release, but will be in the next official release.
Gerry
On Tue, 21 Nov 2000,
I read somewhere that you need to re-compile your kernel with VCD support
for the CD (or filesystem). I'm not sure if this option is available in
the standard kernel or if you need to download a patch from somewhere.
Gerry
Probably not your problem, but make sure you have turned off plug and
play OS in your BIOS. This caused a major headache for me with another
card. Also, the ethernet howto may be helpful as well as looking at the
web sites for the driver of your card (probably listed in the source for
your driver
I was able to solve this problem by reinstalling xfonts-base. The problem
is discussed in /usr/share/doc/xfree86-common/FAQ.gz at the bottom. My
problem was that the /usr/lib/X11/fonts/misc/fonts.alias file did not
exist on the first install for some reason. The re-install fixed it.
Gerry
On
I just did a new woody install and tried installing X 4.0.1 on it. When I
run startx, X starts up but then crashes with the message:
Fatal server error:
could not open default font 'fixed'
I've installed xfonts-100dpi, xfonts-75dpi, xfonts-base, xfonts-pex, and
xfonts-scalable. Any clues what
In Windows, when I shutdown the computer, it automatically turns off the
power. I believe it's something in the BIOS that allows this as not all
machines running Windows do this. Is there a way to make Linux do the same
thing? I like listening to MP3's as I go to sleep and would like have it
What C/C++ libraries are available to get web pages from within a C
program? Preferably with the ability to do secure queries.
Thanks,
Gerry
I'm trying to print to a Laserjet 5 network printer. It seems to be
working for the most part, but, when the printer is down, instead of jobs
being spooled in the spool directory, the lpr command just times out and
fails. Shouldn't these jobs be waiting in the spool directory until the
printer
I've setup mgetty (from stable) to automatically print faxes when they are
received. This works fine, but when faxes are recieved, it sends an email
to root. Is there any way to disable the sending of a message to root
upon receipt of a fax?
Thanks,
Gerry
On Fri, 11 Feb 2000, David Wright wrote:
Quoting debuser ([EMAIL PROTECTED]):
I've setup mgetty (from stable) to automatically print faxes when they are
received. This works fine, but when faxes are recieved, it sends an email
to root. Is there any way to disable the sending of a message
Also,
There is more documentation for LRP that might be a little better at:
http://linuxrouter.sourceforge.net/documentation/LRP-2.9.4/lrp-sec-EtherToEther.html
Gerry
On Mon, 31 Jan 2000, Michelle Konzack wrote:
Hello Peter,
LRP is based on Debian 2.1 (2.0.36). There are several other
I'm using potato. Today I tried doing locate filename and I got
warning /var/lib/locate/locatedb more than 8 days old. My understanding
is that this is supposed to be updated daily via cron in the script
/etc/cron.daily/find. I wondered if cron was broken so I tried running
the script manually.
After more tinkering around, I think I've found the problem. The problem
is that updatedb is not able to execute the frcode program which it calls
to compress the database. In looking at an older version of updatedb, it
contains the line:
: ${LIBEXECDIR=/usr/lib/locate}
but the version from
1 - 100 of 114 matches
Mail list logo
