Just as an update, when I try to use aplay to play a sound, I get this error:
[root@beall-dell-01 sounds]# aplay phone.wav
Playing WAVE 'phone.wav' : Signed 16 bit Little Endian, Rate 44100 Hz,
Stereo
aplay: pcm_write:999: write error: Input/output error
[root@beall-dell-01 sounds]#
So i'm gue
Hi!
Takashi Iwai wrote:
At Wed, 18 Dec 2002 14:28:09 +0100,
Friedrich Ewaldt wrote:
Using aplay, at the end of the audio file the last played samples get
repeated once. This doesn't happen with 'play', 'cat somefile /dev/dsp'
or 'artsplay'. But when I cause an error beep in a shell, I first
Paul Davis wrote:
>
> >line added to /etc/rc.d/rc.sysinit:
> >
> >action "Loading ALSA Hammerfall driver" modprobe snd-rme9652
> >
> >/etc/modules.conf is set to load soundcore and snd-rme9652-mem before
> >snd-rme9 652, so this takes care of it.
>
> this is not quite right. rc.sysint should load
>it works! disks burn correctly now. thanks to everyone who helped
>me get thi s straightened out, especially paul davis and joerg
>shilling. in case it might help someone else, i'm running a redhat
>based system and load the hammerfall modules at boo t time with this
>line added to /etc/rc.d/rc
it works! disks burn correctly now. thanks to everyone who helped me get this
straightened out, especially paul davis and joerg shilling. in case it might help
someone
else, i'm running a redhat based system and load the hammerfall modules at boot time
with
this line added to /etc/rc.d/rc.sysi
Hi folks,
I was having the exact same problem, so I tried changing the source using
the diff file provided by Takashi, thanks a lot! This did make progress
for me, since before, the i couldn't get the driver to modprobe.
The driver now loads and I can now give gmix/alsamixer to open (couldn't
b
At Thu, 19 Dec 2002 13:06:06 +0100 (CET),
tomasz motylewski wrote:
>
> On Thu, 19 Dec 2002, Takashi Iwai wrote:
>
> > > PS: recently, new people started working on Debian's ALSA packages.
> > > We'll try to forward all the bugs and patches that have piled up against
> > > our packages in the prev
>by hand, changing the 'Sync Mode' value from AutoSync to Master
>(should these values be in quotes?), ran "alsactl store hammerfall",
>unloaded then reloaded the alsa m odules, then ran "alsactl restore
>hammerfall. ("hammerfall" is the card's id.) but asound .state
>still indicates Sync Mode is
i have an AI-3 connected to the hammerfall's optical in/outs. the converter will
slave to
any clock, but when it's the master clock it only operates at 48K. when i use
"arecord -f
cd " this seems to cause arecord to write 44.1k headers even though the data is
at
48K. "aplay" has no problem w
On Thu, 19 Dec 2002, Takashi Iwai wrote:
> > PS: recently, new people started working on Debian's ALSA packages.
> > We'll try to forward all the bugs and patches that have piled up against
> > our packages in the previous era. What's the prefered way of reporting
> > bugs and problems against als
On Thu, Dec 19, 2002 at 12:12:19PM +0100, Takashi Iwai wrote:
> > [resent with my subscriber address... is someone moderating alsa-devel?]
> no, but it's filtered only for subscribers.
Yeah, I mean, if non-subscriber posts are not going to be moderated (ie,
make them go through manually), they sho
At Wed, 18 Dec 2002 14:28:09 +0100,
Friedrich Ewaldt wrote:
>
> Hi Takashi!
>
> Thank you very much for your work!
>
> The last patch solved the problem. No system hangs anymore. Looking
> back, I must say it was not *that* practical to reboot the system every
> time I used the audio device :-
Hi,
At Wed, 18 Dec 2002 15:45:58 +0100,
Jordi Mallach wrote:
>
> [1 ]
> [resent with my subscriber address... is someone moderating alsa-devel?]
no, but it's filtered only for subscribers.
> Hello,
>
> Daniel Kobras reported a bug in arecord ages ago, against
> beta10a. Quoting:
>
> > When
Hello Takashi,
thanks for your fast answer :)
I will give you feedback at latest monday, because I am not at home at
the moment
you are right, this is emu10k1 not audigy
regards
Andreas
Takashi Iwai schrieb:
At Thu, 19 Dec 2002 10:45:22 +0100,
[EMAIL PROTECTED] wrote:
Hello Friends,
Dell s
At Thu, 19 Dec 2002 10:45:22 +0100,
[EMAIL PROTECTED] wrote:
>
> Hello Friends,
>
> Dell ships since a month an OEM Soundblaster Live 5.1 (sb0200) with a
> different PCI ID
>
> for original sblive you got 1102:0002
> the Dell version has 1102:0006
>
> I got no sound with the actual version of
Hello Friends,
Dell ships since a month an OEM Soundblaster Live 5.1 (sb0200) with a
different PCI ID
for original sblive you got 1102:0002
the Dell version has 1102:0006
I got no sound with the actual version of the sound driver.
Could anyone be so kind to incorporate this into the source cod
Brian Victor wrote:
> I'm using a MidiSport 1x1 and devfs. The modules are loading, pmidi is
> displaying the MidiSport and playing MIDI files through it just fine, so
> I presume output through /dev/snd/seq is working. cat /dev/snd/midiC0D0
> displays approrpriate "garbage" characters, but cat /
17 matches
Mail list logo
