> I have never had the cold boot problem and I use the conditions
> you mention above. My hardware is an IBM ThinkPad A31, with a
> rev 0xb HDSP cardbus, acpi *not* enabled (not compiled in and
> a noacpi kernel cmdline), with AC power.
>
> Hmmm, your solution might help people that do have the pr
Thomas Charbonnel wrote on Sat, 02-Aug-2003:
> It has already been reported on this list that the hdsp cardbus card is
> not detected correctly at boot time after a cold boot. When this happens
> here's what dmesg says about it:
> cs: cb_alloc(bus 3): vendor 0x, device 0x
> PCI: devic
i have a dell c600 laptop running kernel 2.4.21
when i load the maestro driver , my system hangs 2 seconds later.
i tried 2.4.20 / 2.6.0-test , same problem
i use alsa version 0.9.5
what informations should i provide to help me trace the freeze ?
-
pony wang wrote:
What I want to do?
I want to play a wave file (22050Hz, 2-ch) via SPDIF channel.
What’s my problem?
I think the ICH4 audio controller can’t convert PCM data of 22050Hz to
48KHz.
And the Codec can’t either (codec generally accept 3 sample rates: 32K,
44.1K
