Sorry i'm new :-) from 2003 today is my first visit to linuxaudio.org
home page, i never know about their existence. Then can someone explain
here in a few words a little history about when/how LAD and linuxaudio was
born and their dependencies?
Sorry this kind of discussion is to m
Takashi Iwai wrote:
[snip]
i applied the fixed version to cvs. please check it later.
the changes are fine.
could you also provide the patch to INSTALL (document) file?
the patch is attached (against current alsa CVS)...
thanks,
Takashi
greetings,
wilfried
Index: INSTALL
=
Yes, is much better quality with automatic option, arts is ok, just only
the surround control is Master Volume, then no one mixer including
alsamixer can change the volume with master one.
And of course alsamixer is the almost only one that avoid to change
surround state (Master control volume).
I will test it. for A7v8X-X
>> Mensaje original <<
El 13/01/04, 4:33:51, Timo Hirvonen <[EMAIL PROTECTED]> escribió sobre el
tema [Alsa-devel] via82xx: DXS channels:
> Hi!
> I tested DXS channels of my via82xx chip. My motherboard is ASRock
> K7VT2 and the ker
Hi,
At Fri, 9 Jan 2004 20:08:23 -0600,
David Fries wrote:
>
> I need this patch so in the future if something is taking the irq and
> I don't notice it I'll at least have a message saying so.
>
> I tried the 2.4.22 kernel and all it would tell me was that the opl3sa
> module couldn't find the ha
At Tue, 13 Jan 2004 00:33:51 +0200,
Timo Hirvonen wrote:
>
> [1 ]
> Hi!
>
> I tested DXS channels of my via82xx chip. My motherboard is ASRock
> K7VT2 and the kernel is 2.6.1-mm2.
>
> With dxs_support=1 option DXS channels did not work (bad sound quality)
> but they did with dxs_support=4.
>
At Mon, 12 Jan 2004 18:03:05 +0100 (MET),
Clemens Ladisch wrote:
>
>
> set file permission bits for output file
>
applied now.
thanks,
Takashi
---
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configu
At Sun, 11 Jan 2004 18:55:47 +0100,
Michael Huijsmans wrote:
>
> Hi,
>
> The Gigabyte GA-7DXR motherboard has a 4-channel SB128
> (ct5880 + STAC9708/11) onboard. The line in and second line out (rear out)
> are wired to the same connector.
> After some trial-and-error with the ct5880 GPIO regis
i've got a problem with my hammerfall dsp (multiface + cardbus) ...
it might be an alsa problem: i can load all modules and upload the
firmware with hdsploader ... and i can mix the inchannels to the
outchannels with hdspmixer ...
but when i start a sound application (jack,oss layer, aplay) every
Justin Cormack wrote:
I think it may be something else in the hardware setup, as it works fine
for me. Are the disks running dma? Is there some interrupt oddness? What
kernel is it? What kind of machine? What filesystem? The fact that it
works with JACK suggests that it is a small delay that apla
10 matches
Mail list logo
