Hi, I have a Shuttle SK41G machine. This has a VIA8235, with an Avance Logic
ALC 650 Rev 0 on it.
Problem: I want to use the digital out on this board talking to my digital
receiver for normal audio. I also want to have AC3/DTS passthrough when
playing DVDs.
Something is playing up. Usually,
Hi, this patch enables output from the front speakers on Audigy2 cards. I've removed
the
rubbish I had for disabling the AC97 codec mixer.
--- CUT HERE ---
Index: pci/emu10k1/emu10k1_main.c
===
RCS file:
On Tuesday 18 March 2003 05:18, Mark J Roberts wrote:
I noticed that I can play back the audigy2-drive RCA SPDIF input by
turning up the Optical IEC958 slider, and arecord -f dat out.dat
will record it.
So, good. Just posting some more random info.
Cool, I'll add that to my list
BTW,
Please ignore the disable-AC97 mixer part of my Audigy2 patch. it isn't that
simple...
It seems the AC97 is only used for capture on the Audigy2.. As you said, you
need it to control capturing from mike, line in etc.
However, it also seems that the microphone input is routed through the FX
Hi, am I being stupid, or do the mixer controls not work under the Audigy2.
If I run alsamixer, I can adjust sliders but it has no effect on the
output. I can run other programs (e.g. xmms) simultaneously, and see the
silder changing in alsamixer, but again, it has no effect on the output.
On Tuesday 11 March 2003 20:17, Mark J Roberts wrote:
If I run alsamixer, I can adjust sliders but it has no effect on the
output. I can run other programs (e.g. xmms) simultaneously, and see the
silder changing in alsamixer, but again, it has no effect on the output.
My mixer is
Hi, this patch is in three parts.
1) The changes to emufx.c make LIN_OUT1 work on the Audigy2. It seems to be the AC97
thing again... in fact there
was even a line in there helpfully commented out ready to be used :)
2) The changes to emu10k1_main.c. This is setting the card to use Analogue
Hi, I've been having a frustrating couple of days getting IR to work on my
brand new Audigy2 drive... Lots of people seem to have it working, but for
me, it refused. Enabling it under windows showed that the IR _did_ work, and
if I rebooted immediately into linux, IR worked there too (although
Oh, BTW, you have to use /dev/snd/midiC0D1 for it to work with lircd.. the
/dev/midi, /dev/midi00, /dev/sequencer OSS compatability layers DO NOT work.
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
