ok, i will do that this evening when i get home.
thanks,
ian
On Mon, 2004-02-23 at 12:47, Clemens Ladisch wrote:
> ian esten wrote:
> > thanks clemens. the mt4 now shows up in /proc/asound/cards.
> > unfortunately though it doesnt seem to be working. i sent it some midi
> > from seq24, and got no
ian esten wrote:
> thanks clemens. the mt4 now shows up in /proc/asound/cards.
> unfortunately though it doesnt seem to be working. i sent it some midi
> from seq24, and got no blinking lights on the front of the unit. do you
> think it will be possible to get the mt4 working with alsa?
It's possi
thanks clemens. the mt4 now shows up in /proc/asound/cards.
unfortunately though it doesnt seem to be working. i sent it some midi
from seq24, and got no blinking lights on the front of the unit. do you
think it will be possible to get the mt4 working with alsa?
thanks very much,
ian
On Fri, 2004-
ian esten wrote:
> On Thu, 2004-02-19 at 03:28, Clemens Ladisch wrote:
> > Please post the output of "lsusb -v".
>
> Bus 001 Device 040: ID 086a:0003 Emagic Soft-und Hardware GmbH
> .
> .
> .
These descriptors look very much like those of earlier Edirol devices.
It may be possible that the MT4 is
here it is:
Bus 001 Device 001: ID : Virtual Hub
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor
ian esten wrote:
> i have an emagic mt4 i'm trying to use with alsa.
Currently, nobody knows how to communicate with this device.
Please post the output of "lsusb -v".
Regards,
Clemens
---
SF.Net is sponsored by: Speed Start Your Linux App
hi all,
i have an emagic mt4 i'm trying to use with alsa. it's a 2 in 4 out usb
midi device. i have just updated to alsa-driver-1.0.2c to see if that
would help, but no joy. from /var/log/messages i get:
Feb 18 13:19:26 ian-lnx kernel: usb.c: USB device 4 (vend/prod
0x86a/0x3) is not claimed by any