I just did it.
I got the new 0.9b alsa stuff.
1. I have kernel 2.4.17, FROM www.kernel.org
Built myself 'cause I do Netfilter dev stuff.
2. After building the kernel with support for my via686 chipset,
built alsa-driver, ./configure, make, make install...
Also fiddled with the
On 01-Jan-02, Kevin Gordon wrote:
> I am using a Vibra128 Model CT4810 (Creative Sound Blaster AudioPCI).
> I assumed that the correct Linux driver is snd-card-ens1371. However
> when I run # amixer I get a error "The ALSA sound driver was not
> detected in this system". When booting it appears t
On 01-Jan-02, Ben Bogart - FMPM/F1999 wrote:
> So I finally managed to get alsa-driver, -lib and -util to compile
> without errors. but I don't get any sound...
>
> I'm using snd-card-ens1371 (SB PCI 128) i've run "amixer set PCM 100
> unmute" to unmute and then i run aplay -v I get:
Have you
I'm interested in getting the ALSA driver working on Mandrake 8.1, but have
no idea where to begin. I've done some extensive searching but have failed to
come up with any real useful information on the level I need. Can anyone
point me in the right direction. Thanks!
Roy
_
On Tue, 1 Jan 2002, Miroslav Kure wrote:
> I have a problem with Yamaha DS-XG PCI (YMF724) and floppy.
>
> When I access floppy while ALSA modules are loaded, my computer
> completely locks (SysRq magic key doesn't work, ping doesn't work either)
> and I must cold-reboot machine (no error message
Hi.
I have a problem with Yamaha DS-XG PCI (YMF724) and floppy.
When I access floppy while ALSA modules are loaded, my computer
completely locks (SysRq magic key doesn't work, ping doesn't work either)
and I must cold-reboot machine (no error message appears on console
or syslog).
When I unload
Thanks so much. I found the following caused the front to
activate:
control.42 {
comment.access 'read write'
comment.type BOOLEAN
iface MIXER
name 'Master Playback Switch'
value true
}
Mine was set
I seem to only have rear outputs working. I discovered this by messing
around alsamixer. No other volume control seems to let me adjust the
front volume. I have read through some past emails, and the included
documentation, and I can't figure out what's wrong. I am using kernel
2.4.16, and al
"Strykar " <[EMAIL PROTECTED]> on Tue, 01 Jan 2002 14:19:32 wrote:
>I have an ESS 1688f ISA and an ES1730PCI card, i'd like some help on gettin
>both of them to work on my 2.4.5 Slackware 8 box. Im new to linux and was
>hoping you guys could help as i was told ALSA is a superior option to OSS.
I have an ESS 1688f ISA and an ES1730PCI card, i'd like some help on gettin
both of them to work on my 2.4.5 Slackware 8 box. Im new to linux and was
hoping you guys could help as i was told ALSA is a superior option to OSS.
Thanks
On Tue, Jan 01, 2002 at 07:08:54AM -0500, Ben Bogart - FMPM/F1999 wrote:
> So I finally managed to get alsa-driver, -lib and -util to compile
> without errors. but I don't get any sound...
>
> I'm using snd-card-ens1371 (SB PCI 128)
> i've run "amixer set PCM 100 unmute" to unmute and then i ru
So I finally managed to get alsa-driver, -lib and -util to compile
without errors. but I don't get any sound...
I'm using snd-card-ens1371 (SB PCI 128)
i've run "amixer set PCM 100 unmute" to unmute and then i run aplay -v I get:
Playing WAVE '/store/Applications/pd/doc/4.fft.examples/x.wav' :
Thank you Knut & Jurriaan
- Original Message -
From: "Knut Ove Hauge" <[EMAIL PROTECTED]>
To: "Kevin Gordon" <[EMAIL PROTECTED]>
Sent: Tuesday, January 01, 2002 8:49 PM
Subject: Re: [Alsa-user] Fw: Creative Vibra128 Sound Card
> Hi again.
> There is several Ensoniq drivers available in
... I wanna listen... -_-;;
I can't use English well. Sorry for that...
My sound card is 'Sound Track Digital-XG Gold'.
(YMF 754, produced by HOONTECH)
type 'modules snd-card-ymfpci'
type 'lsmod'
next...
like this..
Module Size Used by
snd-card-ymfpci 4608 0 (unuse
On Tue, Jan 01, 2002 at 12:41:06PM +1300, Kevin Gordon wrote:
> Just checked the model number CT4810 at the Creative Support Site and they
> say my card is called Sound Blaster Ensoniq AudioPCI. Checked for a Linux
> driver and they say no driver at present. The number on the main chip is
> Creati
15 matches
Mail list logo
