Hello Alsa community,
Help! I have two audio cards: via82xx and a ice1712
eval board. I'm using alsa 0.9.0rc6.
The ice1712 board has 8 analog input channels for
analog to digital conversion. This of course is using
the professional/multi side of the board. I want to
open 4 simulateous stereo pa
Hi list,
For those of you using a Midiman Delta 1010 sound card, here is a simple
asound.conf file doing the job to provide both coupled and independant channels
control. I had some trouble figuring this out, so at least, I hope it could
give you a hand,
# Asound.conf START
pcm.ice1712 {
Hello,
Finally, I got the alsa drivers, lib and utils compiled and installed.
alsaconf allowed me to configure my pci512 card, and alsasound says the
driver is loaded.
Next step, I am using amixer to set up the system, and while I can set the
volume levels, I can't use the unmute parameter anywhe
On Wed, Feb 05, 2003 at 10:15:45PM +0100, [EMAIL PROTECTED] wrote:
> Hello,
hello
> May i have some help, I have an debian 3.0r1 and I want to
> install Alsa driver 0.9rc7, .
> I compile and install driver 0.9rc7 on place of an older
> driver 0.9rc6 and
> don't succeed on uninstall this
Hello,
May i have some help, I have an debian 3.0r1 and I want to
install Alsa driver 0.9rc7, .
I compile and install driver 0.9rc7 on place of an older
driver 0.9rc6 and
don't succeed on uninstall this one.
I think it's very easy but i don't know how to proceed.
Thanks
Accédez a
On Wed, 05 Feb 2003 18:52:36 +0100
Takashi Iwai <[EMAIL PROTECTED]> wrote:
> could you tell me which ac97 codec is detected on your machine?
> please check /proc/asound/card0/ac97#0.
Sure, this is the Asahi Kasei AK4540 (also identified as such by the normal OSS
driver: AC97 Codec detected: v: 0
At Wed, 5 Feb 2003 18:40:42 +0100,
Voluspa wrote:
>
>
> By deleting one test done to the ac97 codec, the es1968 driver loads (and works).
>With this I've reached the end of my debugging capabilities:
ah, thanks!
this is something what i've already seen on the kernel oss driver, but
didn't know
By deleting one test done to the ac97 codec, the es1968 driver loads (and works). With
this I've reached the end of my debugging capabilities:
--- alsa-driver-0.9.0rc6/alsa-kernel/pci/ac97/ac97_codec.c Wed Oct 30 15:20:08
2002
+++ debug-alsa-driver-0.9.0rc6/alsa-kernel/pci/ac97/ac97_codec.
Hi,
I have exactly the same problem, I was considering posting here.
My config is 2.4.21pre4 (HIGHMEM) alsa 0.9.0rc7 , my system has 1GB memory.
(the prb was the same with 2.4.21pre3 and 0.9.0rc6)
I'm going to use esd so that /dev/dsp won't be opened every X minutes. :-)
--
Laurent
--
I downloaded the rc7 packages and have a HerculesGame Fortissimo III.
Linux distro : Redhat 8.0 Psyche.
I followed the installation manual of the sound card matrix :
http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Hercules&card=Game+Fortissimo+II&chip=CS4624&module=cs46xx
The w
Thanks to all for the alsa mixer help.
Aaron
On Wed, 2003-02-05 at 16:41, Georgi Georgiev wrote:
> Aaron wrote:
> > Well now that you mention it.
> > Every time I reboot the mixer mutes and I have to unmute over again.
>
> use alsactl for automatic save/restore of mixer states.
>
> --
> /^
Aaron wrote:
Well now that you mention it.
Every time I reboot the mixer mutes and I have to unmute over again.
use alsactl for automatic save/restore of mixer states.
--
/^^^\/\
/ Georgi Georgiev(-< / Memories of you remind me of
Andrew Heil wrote:
> In order to try out Rosegarden, I installed the ALSA v0.9.0rc7 drivers.
> When compiling the drivers, I got the following errors (or something
> very similar):
>
> Unresolved symbols in snd-gus-synth.o
> Unresolved symbols in snd-emu8000-synth.o
> Unresolved symbols in snd-emu1
thanks! :)
yes, my bios config seems to set some unusual ports, which might be part
of the problem - i have irq=9...
i might try the alsaconf script - never used it before, always worked by
hand...
best
m~
Takashi Iwai wrote:
At Wed, 05 Feb 2003 10:06:46 +,
iriXx wrote:
err... are you runn
My computer now plays music like never before. Much better then OSS,
before with OSS the volume was to low but with ALSA I can now adjust the
ogain. Also there is some strange 3D-setting that makes it sound "better"
(or different at least).
I'm very, very happy with alsa so far.
Is there a way
At 02 Feb 2003 02:52:01 +0100,
Olaf Giesbrecht wrote:
>
> > could you show /etc/asound.state for debugging.
>
> here it is:
>
> state.ICE1712 {
...
> control.5 {
> comment.access 'read write'
> comment.type BOOLEAN
> iface MIXER
>
At Wed, 05 Feb 2003 10:06:46 +,
iriXx wrote:
>
> err... are you running a thinkpad 600e by any chance?
> im still trying to get mine working
you need to set up the module options correctly.
you can try the below.
options snd-cs4236 port=0x530 cport=0x538 irq=5 dma1=1 dma2=0 \
isa
err... are you running a thinkpad 600e by any chance?
im still trying to get mine working
m~
Dennis Björklund wrote:
On Wed, 5 Feb 2003, Jaroslav Kysela wrote:
It's cs4236 based card. Try the snd-cs4236 module.
Hoho.. This is great! I've been using OSS cs4232 for maybe 3 years on this
On Wed, 5 Feb 2003, Jaroslav Kysela wrote:
> It's cs4236 based card. Try the snd-cs4236 module.
Hoho.. This is great! I've been using OSS cs4232 for maybe 3 years on this
old machine. I never suspected it was something else :-)
snd-cs4236 does load as it should. I get one error message though:
On Wed, 5 Feb 2003, [ISO-8859-1] Dennis Björklund wrote:
> I just tried alsa for the first time but ran into a problem:
>
> I use rh80 (kernel 2.4.18) and alsa 0.9.0 rc7 that I got from
> freshrpms.net. When I try to load snd-cs4232 get:
> Card 2 'CSC8025:Onboard PnP Audio' PnP version 1.0 Prod
I just tried alsa for the first time but ran into a problem:
I use rh80 (kernel 2.4.18) and alsa 0.9.0 rc7 that I got from
freshrpms.net. When I try to load snd-cs4232 get:
>modprobe snd-cs4232
/lib/modules/2.4.18-19.8.0/kernel/sound/isa/cs423x/snd-cs4232.o: init_module: No such
device
Hint: in
Karsten, could you please check this?
thanks,
Takashi
At Tue, 4 Feb 2003 11:20:50 -0500,
lloyd wrote:
>
> So, is it hopeless for my Turtle Beach Pinnacle?
>
> It's old, but the sound quality is very good... :-(
>
>
> On Sat, 1 Feb 2003 19:35:18 -0500
> lloyd <[EMAIL PROTECTED]> wrote:
>
>
Well now that you mention it.
Every time I reboot the mixer mutes and I have to unmute over again.
Thats number 1.
Next I can't seem to record from the line in I think I read somewhere
that I have to enable this somewhere but couldn't figure it out.
Also only one speaker out put seems to work.
Th
23 matches
Mail list logo
