Don't know about earlier 2.5 kernels since I had the ac97 'not responding' trouble
then. The error:
FATAL: Module snd_card_0 not found.
is only displayed on screen, not through dmesg or any /var/log file. Going from
module-init-tools-0.9.9-pre over the ehem... stable 0.9.9 to 0.9.10pre makes n
Hi all,
Here's the problem I have (or I've been having for a long time now).
I've successfuly installed the alsa's driver and the sound works ok. But,
every time I open Kmix (since I am using KDE as my primary desktop) I can
adjust all the levels, but the only available audio inputs are Main, L
-Original Message-
From: Ivica Bukvic [mailto:[EMAIL PROTECTED]
Sent: Monday, February 24, 2003 3:59 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: problems with Midisport 2x2
Hi all,
I've got a small problem with my Midisport 2x2 MIDI interface. While it
wo
Hello,
I'm trying to get sound capture to work. The only alsa drivers & libs that
will install on my system are rc1 & rc2. I have Mandrake 9.0 installed
(gcc-3.2) with an ens1371 card. The modules load into memory.
arecord -f dat -d 20 -D hw:0,0 test.wav
gives me:
Recording WAVE 'test.wav' :
Hello!
I don't know, if this might resolve any problem. But wouldn't it be wise, to
install the modules first and then the libs and the rest afterwards? I just
think so, because the modules are the basis for the rest. thus if installing
the libs first, may compromise the functionality. Maybe you
I /think/ I posted earlier, but mabye it didn't go through, i haven't gotten any
replies to date.
I'm running slack 8.1, trying to install alsa 0.9.x.
It doesnt' matter what package I get from the download page, or from CVS, I have the
same problem. I download the package(or CVS), and install in
On Wednesday 19 Feb 2003 7:34 pm, Stuart Gardner wrote:
> I am still trying to get my nForce sound working via ALSA.
> Since I last said anything here, I have attempted to use the
> 2.4.21-pre2-jp15 kernel which has ALSA built in [1]
Eventually fixed this.
2.4.20 with soundcore compiled in dire
hello -
i just got alsa working on a compaq armada m700 with a ESS Technology
ES1978 Maestro 2E. everything works fine when i boot standalone, but
when i try to boot the laptop up in the docking station/convenience
base, it hangs during boot, immediately after the:
es1968: not attempting power ma
Hi,
Has anyone tried to use the coaxial S/PDIF in on the "Trust Sound Expert Optical"
sound card? (I am _not_ talking about the s/pdif CD connector). If so, was it
successfull or not?
The input does not seem to work for me, not even in loop back mode. The optical input
works fine. I have not p
I installed alsa-driver-0.9.0rc7 but cannot insert the module
snd-intel8x0. Modprobe fails with the error messages shown below.
There are no messages in /var/log/messages. There were also no
messages there in a previous compilation with ./configure
--with-debug=detect.
I have no trouble insert
Emil,
use the most current CVS and use the thinkpad option. I'm not sure what it
does, but when I turned it on, it started working undistorted. :)
- Jack
-Origina
On Sun, 23 Feb 2003, Nehal wrote:
>if you are trying to get regular front output, then
>maybe ur rear is inverted, try connecting the speakers to the other
>output jack on ur card, then the other vol controls may work..
>(currently you can only invert it through OSS drivers i believe)
D'oh! You h
Bob van der Poel wrote:
> Now, when I try to use Jazz++ with ALSA I get a bunch of error messages:
>
> ioctl: Inappropriate ioctl for device
> subscribe input: Inappropriate ioctl for device
> subscribe output: Inappropriate ioctl for device
>
> And no recording ability at all. So, I se
Can anyone tell me how to do this?
thanx
Kai
Brilliant, this worked perfectly.
Thanks a lot.
On Wed, 19 Feb 2003 08:40:28 +0100 (MET) Clemens Ladisch <[EMAIL PROTECTED]> wrote:
carlos ramirez wrote:
> Recompiling from the rc7 sources didn't fix it --
> perhaps the cvs sources then?
Yes, it has been fixed after rc7. You could get the curren
Remco Poelstra wrote:
> I use the rc7 drivers at the moment.
> The SB Live machine works fine, but on the intel8x0 machine aplay uses
> 100%CPU and doesn't give any sound.
Rc7 is buggy. Try rc6 or a CVS snapshot.
HTH
Clemens
---
This sf.net
Frank Barknecht wrote:
> I'd like to test a M-Audio Quattro interface in a shop before buying.
> For this, I want to do as much setup in advance on my notebook as
> possible. ALSA is already configured for snd-usb-audio, but does the
> Quattro's midi part need a firmware like the Midisport interfac
Hi,
I have a Delta 410 and the (8) analog outputs are mapped in stereo to dsp0,
dsp1, dsp2 and dsp3. I don't know if the digital output works.
Alsa comes with a mixer/routing tool called envy24control which (I believe)
can make the routings you mention (I have not tried though). The tool is
very s
Hallo,
I'd like to test a M-Audio Quattro interface in a shop before buying.
For this, I want to do as much setup in advance on my notebook as
possible. ALSA is already configured for snd-usb-audio, but does the
Quattro's midi part need a firmware like the Midisport interfaces?
I downloaded the
Hello All
If/when I get my Delta 44, how are all the inputs and outputs mapped
into/out of the system? /dev/dsp0 - /dev/dsp7? How exactly does this work?
Does the driver for these cards provide any routing capabilities between
the inputs and outputs?
Any info appreciated.
Thanks - JB
# Jo
On Mon, 24 Feb 2003, Clemens Ladisch wrote:
> Michael Mauch wrote:
> > when I record a Sun au file in S16_LE format, aplay claims it's in
> > S16_BE format, and auplay and sox play only noise.
>
> .au files always have big endian format, but arecord doesn't check for
> this.
I've fixed this prob
On Sun, 23 Feb 2003 10:30:02 -0500
Adam Oliver <[EMAIL PROTECTED]> wrote:
> I compiled the alsa drivers with the following options
> --with-cards=cs4232
> --with-sequencer=yes
> --with-isapnp=yes
>
> I did the make and make install and also compiled and installed the libs
> and utils. The versi
Michael Mauch wrote:
> when I record a Sun au file in S16_LE format, aplay claims it's in
> S16_BE format, and auplay and sox play only noise.
.au files always have big endian format, but arecord doesn't check for
this.
HTH
Clemens
---
This
23 matches
Mail list logo
