Tried editing memalloc.c, but still had the same
limitations.
Upgraded to kernel 2.6.6-mm2 and everything's
working as it ought. Thanks for the help.
Is it possible to recieve Dolby Digital on the S/PDIF In coax jack on my
SB Live! livedrive, decode it, and send it as 4-channel stereo to
speakers? I have a SB Live! Platinum, 4 channel (not 5.1). The source is
a consumer dvd-video player, the kind in a home theatre system, not
internal. The outpu
On Saturday 15 May 2004 19:35, Arkadi Kagan wrote:
> Thanks for your answer.
>
> I checked dmesg and syslog after running modprobe.
>
> Indeed, in /etc/modules.conf I don`t have sound-slot-1 and
> sound-service-1-0.
Sound-slot-1 and sound-service-1-0 are for a second soundcard; the
messages are j
Thanks for your answer.
I checked dmesg and syslog after running modprobe.
Indeed, in /etc/modules.conf I don`t have sound-slot-1 and
sound-service-1-0.
In /proc/modules I don`t have it too.
Instead I have esssolo1 in /proc/modules and alias to in /etc/modules.conf
(sound-slot-0).
What`s next ?
f
Ok, I admit I am running ALSA at v0.9 something, what came installed with
Debian Unstable, but, ever since getting ALSA running, all I ever heard was
"Don't set your volume settings above 75%" - Why?
I have been running ALSA with volume settings at 74%, since AlsaMixer seems to
"jump" to around
I've been trying to get the AC3 passthrough
feature on my Audigy2 working again to no avail. I get either
only stereo sound through the spdif or noise of even silence.
I am using alsa-* 1.0.4 on kernel 2.6.5.
What mixer/iecset and other settings do I need to get it working again?
Jurgen
On Saturday 15 May 2004 01:55, Arkadi Kagan wrote:
> Hello.
>
> I have a problem to run alsa-driver.
> When I try '/sbin/insmod snd-es1968', I get unresolved symbols error.
> /proc/ksyms don`t have nothing close to missing entries.
>
> Any advice is wellcome.
>
> Thanks.
> Arkadi.
>
> -
It worked, thanks.
The sound is somewhat distorted, but at least I can
use the microphone.
Thanks again,
Elad
--- Takashi Iwai <[EMAIL PROTECTED]> wrote:
> At Fri, 14 May 2004 09:25:11 -0700 (PDT),
> Bill Unruh wrote:
> >
> > On Fri, 14 May 2004, Elad Lahav wrote:
> >
> > > Hi,
> > >
> > > I a
On May 14, 2004 08:20 pm, Bill Unruh wrote:
Hi Bill,
> It probably means that signed 32 bit Little Endian is not available. Try
> 24 bit instead. Are you sure it is a little endian card?
Not sure what the interface is, but I can try several possibilities.
I expect its the same as the UA700 whic
I am the only one with this problem?
> hi all,
> i'd like to play stereo files over all speakers of my 4.0 surround
> sound, so
> this is mine .asoundrc:
>
> pcm.ch40dup{
> type route
> slave.pcm "surround40"
> slave.channels 4
> ttable.0.0 1
> ttable.1.1 1
> ttable.
10 matches
Mail list logo
