Takács Áron wrote:
> > What is the output of "amixer contents"?
>
> >amixer contents
> numid=9,iface=MIXER,name='Master Playback Volume'
> ; type=INTEGER,access=rw---,values=2,min=0,max=63,step=0
> : values=3,3
Isn't that a little low?
Regards,
Clemens
-
Takács Áron wrote:
> But I can't hear any music...
> I've tried to unmute the "master" and "headphone" items with alsamiwer, but
> no use.
What is the output of "amixer contents"?
Regards,
Clemens
-
Take Surveys. Earn Ca
On 21/09/06, Marcin Lewandowski <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have Audigy2 ZS PCMCIA card. I use emu10k1 driver from gentoo
> alsa-driver-1.0.13_rc2. I can play sound but I have problems with
> capture. I turned all things in mixer to 100% level and I can't record
> anything. In Windows it
Takács Áron wrote:
> I've copied the alsa-related subdirectories from /opt/arm-linux/share (host)
> to /opt/arm-linux/opt/share on the embedded board. I think I am a step
> further, but I can't hear anything yet.
>
> aplay -L, and amixer produce a lot of output.
This means these files are now i
>
> The configuration files in /usr/share/alsa are needed, too.
>
I've copied the alsa-related subdirectories from /opt/arm-linux/share (host)
to /opt/arm-linux/opt/share on the embedded board. I think I am a step
further, but I can't hear anything yet.
Now I have the following situation:
>ap
Takács Áron wrote:
> I made the followings on the host machine:
>
> >./configure --prefix=/opt/arm-linux --host=arm-linux
> >make
> >make install
>
> After that I copied libasound.so, libasound.so.2 libasound.so.2.0.0
> from /opt/arm-linux/lib to /lib on the embedded arm board.
The configuratio
> Takács Áron wrote:
> > >aplay /data/bach.au
> > ALSA lib pcm.c:2090:(snd_pcm_open_noupdate) Unknown PCM default
>
> alsa-lib isn't installed correctly.
> How did you configure and install it?
>
>
> Regards,
> Clemens
>
Hi Clemens,
Thanks for your answer!
I made the followings on the host
Takács Áron wrote:
> >aplay /data/bach.au
> ALSA lib pcm.c:2090:(snd_pcm_open_noupdate) Unknown PCM default
alsa-lib isn't installed correctly.
How did you configure and install it?
Regards,
Clemens
-
Take Surveys. Earn Cas
Hi,
I am facing the following problem:
I want to use alsa on an embedded board (Colibri by Toradex) with a PXA270 CPU
and a UCB1400 codec. I use a 2.6.12.4 kernel with 4 patches of Nicolas Pitre
found on the arm-linux mailing list. I have the following part in the kernel
config:
#
# Sound
#
C
