[Alsa-user] hda-intel on Thinkpad T60p fails to load with unable to handle kernel paging request

Hi I've been having problems getting sound working before (as seen in issue 2072), but I managed to get around that issue, but doing a load-unload-load of the modules before using them. But after upgrading to linux kernel 2.6.18 and updating to the latest version from the hg repository, I cannot

[Alsa-user] RME Digi96/8 PST aplay: Channels count not available

Jack works nicely through this card although I'm still not being able to output sound via S/PDIF. So to test S/PDIF I tried a simple aplay, however it's failing strangely: $ aplay -D hw:1,0 mlk.wav Playing WAVE 'mlk.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono aplay: set_params:906:

[Alsa-user] loading snd-ca0106 fails for Audigy Live! 7.1 on Debian

Hello, i bought a CS Audigy Live! 7.1 and put it in my Debian Sarge 2.6.8-3-68 box... The card is detected by alsaconfig, but the kernel module doesn't load correctly. dmsg: ALSA /usr/src/modules/alsa-driver/alsa-kernel/pci/ac97/ac97_codec.c:1907: AC'97 0 does not respond - RESET ALSA

Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O

On Tue, 2006-09-26 at 16:37 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: Dominique: try the -rt kernel, enable latency tracing and post the output. Should I use 2.6.17 + rt to stay closer to my current setup or should I get 2.6.18 + rt ? I would say 2.6.18 +

Re: [Alsa-user] RME Digi96/8 PST aplay: Channels count not available

On Tue, 2006-09-26 at 11:15 +0200, Ismael Valladolid Torres wrote: Jack works nicely through this card although I'm still not being able to output sound via S/PDIF. So to test S/PDIF I tried a simple aplay, however it's failing strangely: $ aplay -D hw:1,0 mlk.wav Playing WAVE 'mlk.wav'

Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O

Lee Revell [EMAIL PROTECTED] writes: Dominique: try the -rt kernel, enable latency tracing and post the output. Should I use 2.6.17 + rt to stay closer to my current setup or should I get 2.6.18 + rt ? Thanks - Take

Re: [Alsa-user] hda-intel on Thinkpad T60p fails to load with unable to handle kernel paging request

On Tue, 2006-09-26 at 11:02 +0200, Eivind Tagseth wrote: Sep 26 09:09:10 [kernel] EIP:0060:[c0268bb4]Tainted: GF Why did you forcibly load a module (insmod -f)? Lee - Take Surveys. Earn Cash. Influence the Future

Re: [Alsa-user] hda-intel on Thinkpad T60p fails to load with unable to handle kernel paging request

Lee Revell wrote: On Tue, 2006-09-26 at 11:02 +0200, Eivind Tagseth wrote: Sep 26 09:09:10 [kernel] EIP:0060:[c0268bb4]Tainted: GF Why did you forcibly load a module (insmod -f)? I didn't. I simply ran # modprobe snd-hda-intel model=thinkpad I don't know what modprobe does

[Alsa-user] Any plan to support Hercules Fortissimo IV ?

Hi, I'm about to buy a soundcard and after looong researchs it seems the Fortissimo IV from Hercules is the ideal one. However it is not yet officially and completely supported, and for now must be made run as a Pontis MS300 which has the same DAC on the two first analog channels, but the

Re: [Alsa-user] hda-intel on Thinkpad T60p fails to load with unable to handle kernel paging request

Eivind Tagseth wrote: Hi I've been having problems getting sound working before (as seen in issue 2072), but I managed to get around that issue, but doing a load-unload-load of the modules before using them. But after upgrading to linux kernel 2.6.18 and updating to the latest version

[Alsa-user] a7v8x-x motherboard 5.1 possible?

Greetings, all! I'm attempting to get 5.1 surround working on an a7v8x-x motherboard, it looks like it uses the via83xx set. Has anyone had success with this hardware? Thanks! -Al -- [EMAIL PROTECTED] - Take Surveys.