I seek to use my onboard 4 ch sound in a two stereo setup. so I can
connect a headset to the rear speakers.
I am using gentoo with kernel 2.6.21-ck2-r1 and the alsa provided in the
kernel 1.0.14rc3.
You realise this would mean one audio device would play out of the front
speakers and a
At Sat, 19 Jan 2008 21:23:29 -0200,
Herton Ronaldo Krzesinski wrote:
Em Saturday 19 January 2008 12:45:52 Claudio Matsuoka escreveu:
On Jan 19, 2008 9:56 AM, Tobin Davis [EMAIL PROTECTED] wrote:
I have already requested documentation and a development board from
Conexant, so I should be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
here is my response , with fixed error msg:
Adam Nielsen wrote:
| You realise this would mean one audio device would play out of the front
| speakers and a different one out of the rear speakers? i.e. if you're
| listening to music and you want to
Hello list,
I'm trying to get my surround system working, especially routing the 5.1
channels I have when there is only a stereo playback. This means that
the rear speakers and (especially) the subwoofer should output something
when I play normal music.
What I've got working so far: When playing
Hello,
My sound card is ESI - MAYA44 PCI.
http://www.esi-audio.com/products/maya44/
You can see what I see, if I give command alsaconf in the alsaconf-1.png
named picture.
But, in alsa project page as well as you can see at the my_sound_card.png is
written that The card should be supported by
I then tried the lines you suggested, got the same error. in any case
I would still want to use the front channels to output music , while
using the rear to conduct a phone call simultaneously.
What happens if you do something like this:
pcm.ch34 {
...
bindings {
0 0
0 1
0 2
On Tue, 22 Jan 2008, Adam Nielsen wrote:
I then tried the lines you suggested, got the same error. in any case
I would still want to use the front channels to output music , while
using the rear to conduct a phone call simultaneously.
What happens if you do something like this:
pcm.ch34 {
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi all,
I want to inquire about an update to alsa that will allow better support
for bluetooth headsets.
In this post @02 Nov 2007:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg03135.html
Fabien from the bluez crew states:
device enumeration with
could dshare be missing in my alsa? how can I tell which type are avail
in the version of alsa I am using?
Hang on a minute, why are you using dshare? dshare only gives exclusive
access to particular channels - if you use dmix you'll be able to play
multiple streams over each audio device.
I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
please advice me how .asoundrc should be to test this as a slave. using
this didnt work:
pcm_slave.via4 {
#pcm hw:0
~pcm surround40
~channels 4
}
pcm.ch34 {
~slave via4
~bindings {
~0 0
~
Hi,
I have an Echo Mia soundcard, and I've managed to get it work, but only every
other time I log in, which is a bit of a pain! The initialization of the card
doesn't show up in /var/log/messages when it doesn't work, and when it does
work, I do see the initialization. I also have a built-in
11 matches
Mail list logo