Ari Moisio wrote:
> # Usb-headset
> options snd-usb-audio index=2 vid=0x046d,0x0a02
> # M-audio fasttrack
> options snd-usb-audio index=3 vid=0x0763,0x2012
This does not work because the second 'options' line overrides the
first, and the product ID must be put into the 'pid' parameter.
Use this
Hi
You need to use index option when loading the modules, with usb devices
you also have to specifythe id of the device. Here are examples from
my modules.conf file
# Usb-headset
options snd-usb-audio index=2 vid=0x046d,0x0a02
# M-audio fasttrack
options snd-usb-audio index=3 vid=0x076
Hi,
I have multiple USB devices and one PCI device and would like to ensure the order
of the devices is set.
I understand this is possible but requires some of the hardware detail.
Does someone have an example they can send through?
Regards
Allan
--
David McCloskey wrote:
> I'm having a problem with ALC883 where when recording with arecord or
> ecasound there is an annoying clicking sound in the recording. There
> is no dropping out of any sound though. Also, the recording works
> fine when recording with krecord or audacity which I think ar
On Tuesday 13 January 2009 23:41, sonof...@iinet.net.au wrote:
> Hey
>
> I have the same problem but with multiple MIDI devices that use
> snd-usb-audio (evolution uc-17, bcf-200, amt8), is there a way to set the
> order with multiple cards that use the same module?
>
> cheers
>
> Allan
Hi Al
Am Dienstag 13 Januar 2009 schrieb Nigel Henry:
> The sound is easy to fix, by setting options lines
> in /etc/modprobe.d/alsa-base. Example below.
>
> options snd-hda-intel index=0
> options snd-emu10k1 index=1
>
> Just change the driver names above to yours, and in which order you want
> them to
Hello,
I have a dp35dp motherboard with a Fedora 10 x86_64 system installed.
Excuse my ignorance about ADAT.
I have the optical output connected to the optical input of an olidata
speaker system and it works under linux.
The olidata specs are at
http://www.olidata.com/Prodotti_Vendita/Prodotti/Sche
On 2009-01-10T02:11:28, Allan Wind wrote:
> When sending audio via usb to my Edirol UA-25EX output 1 + 2 works as
> expected, but I am not getting any audio on the phones port.
>
> al...@vent:~$ uname -a
> Linux vent 2.6.28 #2 SMP PREEMPT Thu Jan 8 22:02:02 EST 2009 x86_64 GNU/Linux
>
> al...@ve
Are you sure the optical output functions as ADAT, and not as Dolby Digital or DTS multichannel output?
There is a big difference and I can't see where ADAT would be used in HTPC.. ADAT is primarily used for professional multitrack audio and is common on mid to high end audio devices (like RME a
I don't get my soundcard to stop working again to do a
good test, but nevertheless here is my working asound.state.
I have the same strange values for the IEC958 controls, but they
do not change when I select the Optical Raw option. The 0482000200...000
value is also the right one for me.
I th
Hey
I have the same problem but with multiple MIDI devices that use snd-usb-audio (evolution uc-17, bcf-200, amt8), is there a way to set the order with multiple cards that use the same module?
cheers
Allan
On Wed Jan 14 2:44 , Nigel Henry sent:
On Tuesday 13 January 2009 15:48, Guenthe
hi all,
I compiled 1.0.18a driver, and 1.0.18 lib and 1.0.18 utils on centos 5.2
x86_64 with the following audio device:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 3610
Control: I/O-
David McCloskey wrote:
> That's just a warning. Usually it will be working after that warning.
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/docs/HD-Audio.pdf
>
> Dave
>
> On Sun, Jan 11, 2009 at 11:48 PM, James wrote:
>
>> hda_codec: Unknown model for ALC883, trying auto-probe from B
Does the ADAT output of intel motherboard DP35DP work under linux in
your experience ?
(or DG33TL or other boards from media or extreme intel previous or
current series with IDT/sigmatel STAC927x codec).
Does the STAC927x sigmatel hda codec look like it support their ADAT
output feature ?
here the
- Original Message -
> Date: Mon, 12 Jan 2009 17:15:57 -0500
> De: Grégory SCHMITT
> À: alsa-user@lists.sourceforge.net
> Sujet: hda-intel ALC272 & dmix issue
> Hello,
>
> My card info is located at
>
> http://www.alsa-project.org/db/?f=d6bbe91bcecbd84f4f9b689871a7fe208c5d9440
>
> This
On Tuesday 13 January 2009 15:48, Guenther Meyer wrote:
> hi,
>
> I have a system with two soundcards (nvidia onboard, maudio 1010) running
> debian lenny.
>
> sometimes after a system reboot the order of the devices changes:
> one time nvidia is card 0 and maudio is card 1,
> another time nvidia i
hi,
I have a system with two soundcards (nvidia onboard, maudio 1010) running
debian lenny.
sometimes after a system reboot the order of the devices changes:
one time nvidia is card 0 and maudio is card 1,
another time nvidia is card 1 and maudio is card 0.
that's not good, because all the routi
I'm having a problem with ALC883 where when recording with arecord or
ecasound there is an annoying clicking sound in the recording. There
is no dropping out of any sound though. Also, the recording works
fine when recording with krecord or audacity which I think are both
recording to memory rath
Thanks Bill!!
I'll give it a try this evening and let you know how it goes.
Brian Harrington
harringto...@yahoo.com
--- On Mon, 1/12/09, Bill Unruh wrote:
From: Bill Unruh
Subject: Re: [Alsa-user] No sound! Ubuntu 8.10 and SI7012
To: "Brian Harrington"
Cc: alsa-user@lists.sourceforge.
Good, tight midi playback is pretty much unacheivable in Linux with the
stock kernel due to scheduling jitter. Realtime kernel + 1000Hz timer is
probably best, but you can improve things with a standard kernel by
increasing the timer HZ setting of the kernel to a value around 1000Hz
but that s
20 matches
Mail list logo
