Hi
When attemptin to load snd-emu10k (alsa 1.0.16, kernel 2.6.26-2-686)
i got following error message
# modprobe snd-ymfpci
[89978.686314] ACPI: PCI Interrupt :00:11.0[A] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[89978.707674] firmware: requesting yamaha/ds1_dsp.fw
[89978.759835] f
ar...@iki.fi wrote:
> Hi
>
> When attemptin to load snd-emu10k (alsa 1.0.16, kernel 2.6.26-2-686)
> i got following error message
>
> # modprobe snd-ymfpci
> [89978.686314] ACPI: PCI Interrupt :00:11.0[A] -> Link [LNKD] -> GSI 10
> (level, low) -> IRQ 10
> [89978.707674] firmware: requestin
Hi,
I need to install Echo Gina3G under Kubuntu 8.04(clean instalation),
I've tried to follow:
http://www.alsa-project.org/main/index.php/Matrix:Module-echo3g#Quick_installation
prior to these attempts I've installed clean system, actualizations,
restricted packages and four packages
1. libnc
Hi
Thanks:-) I downloaded the relevant firmware package from alsa-project
site, configured, compled and installed. Everthing is working again:)
I only wonder if the driver itself loaded the firmware earlier because
there were no such issues with 2.4 kernels?
--
mr. M01510 & guide Lo
Hi Daniel,
I got everything on the SigmaTel CXD9872AKD to work (internal/external mic,
internal speakers & headphones with proper muting of internal speakers when
headphones are plugged in) using the following in alsa-base:
options snd-hda-intel probe_mask=1 model=vaio
Choose HDA Intel (Alsa
Hi folks,
I tried Linux 2.6.29.1 on an Acer Aspire Revo. Problem: By default
there is no sound at all, neither via the hdmi connection, nor on
the headphone. In dmesg I found this:
[ 20.375073] HDA Intel :00:08.0: PCI INT A -> Link[LAZA] -> GSI 22
(level, low) -> IRQ 22
[ 20.386838] HDA
Follow up: I now tried internal mic vs external mic and hdmi output
according to different model= options
I have external mic inputing sound with: fujitsu, benq, benq-t3, hippo
hippo_1 , sony and lenovo-3000
I have digital option "IEC958" in alsamixer with : fujitsu, hippo
hippo_1 however NO SOUND
On Thu, 2009-04-23 at 11:08 -0700, Bill Unruh wrote:
> On Thu, 23 Apr 2009, João Mamede wrote:
>
> > Follow up: I now tried internal mic vs external mic and hdmi output
> > according to different model= options
> > I have external mic inputing sound with: fujitsu, benq, benq-t3, hippo
> > hippo_1
On Thu, 23 Apr 2009, João Mamede wrote:
On Thu, 2009-04-23 at 11:08 -0700, Bill Unruh wrote:
On Thu, 23 Apr 2009, João Mamede wrote:
Follow up: I now tried internal mic vs external mic and hdmi output
according to different model= options
I have external mic inputing sound with: fujitsu, benq
On Thu, Apr 23, 2009 at 11:52 AM, Nix Vitae wrote:
> Still working on the SPDIF & HDMI part.
What video hardware? What graphics driver?
Lee
--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simpl
On Wed, Apr 22, 2009 at 7:26 AM, João Mamede wrote:
> I can't either put the hdmi audio to work. Again with the model=fujitsu
> option I have the IEC958 option available but it doesn't output any
> sound.
What video card? What graphics driver?
Lee
--
On Thu, Apr 23, 2009 at 7:46 AM, Martin Mucha wrote:
> Errors:
>
> r...@mm-homepc:/usr/src/alsa/alsa-driver-1.0.9# make
> make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore'
> gcc -D__KERNEL__ -DMODULE=1 -I/usr/src/alsa/alsa-driver-1.0.9/include
> -I/lib/modules/2.6.24-23-generic/b
Lee Revell ha scritto:
> On Wed, Apr 22, 2009 at 7:01 AM, Matteo Pegoraro
> wrote:
>
>> I'm trying to configure alsalib to make format conversion
>>
>> the asound.conf is:
>>
>> pcm_slave.sl1 {
>>
>
> Shouldn't this be:
>
> pcm.sl1
>
> ?
>
According to the documentation this is the way
Ari Moisio wrote:
> Thanks:-) I downloaded the relevant firmware package from alsa-project
> site, configured, compled and installed. Everthing is working again:)
>
> I only wonder if the driver itself loaded the firmware earlier because
> there were no such issues with 2.4 kernels?
In ol
14 matches
Mail list logo
