Matt Garman wrote:
pcm.!default {
type plughw
card 0
}
ctl.!default {
type plughw
card 0
}
without a default alsa.conf, plughw doesn't exist.
It is composed of the plug on top of hw.
On my system it is defined in /usr/share/alsa/alsa.conf
you might try
pcm.!default
o...@funkster.org wrote:
Hi all,
Hope this is in the right place. I've got a VIA EPIA M1 with an
LFS system based around kernel 2.6.22.5 and alsa-lib 1.0.19. Sound
works for 2-channel playback but I want to start using all 6 channels
that the hardware gives (VIA VT1616 AC97 connected to
o...@funkster.org wrote:
Hi all,
Hope this is in the right place. I've got a VIA EPIA M1 with an
LFS system based around kernel 2.6.22.5 and alsa-lib 1.0.19. Sound
works for 2-channel playback but I want to start using all 6 channels
that the hardware gives (VIA VT1616 AC97 connected to
Ghislain Leveque wrote:
# front output (found in the recipe)
pcm.out12 {
type plug
slave {
pcm dshare
channels 4
}
ttable.0.0 1
ttable.1.1 1
}
I now have to find how to setup the 8 outputs...
I guess you'd need to use channels 8 instead of channels 4
What I'm looking at is to be able to play differents sounds to different
outputs.
A variation on this recipe may help:
http://alsa.opensrc.org/index.php/.asoundrc#Splitting_front_and_rear_outputs
--
This SF.net email
Henry W. Peters wrote:
1.) I would like to know if these are the most current
drivers/firmware: 'alsa-driver-1.0.8.tar.bz2'
'alsa-firmware-1.0.8.tar.bz2'
Not at all current.
See http://www.alsa-project.org/ 1.0.18a is the most current.
Lasse Jensen wrote:
what i really want is to use one of the six jack
connectors on the back for one seat and another for the second seat.
Something based on this may work for you - I know it works for a single
user. I don't know whether there are reasons that it won't work for
multiple users.
://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
Look for section Plugin: Multiple streams to One
also this
http://alsa.opensrc.org/index.php/.asoundrc#Joining_devices_to_make_multichannel
regards
--
--
Eliot Blennerhassett
www.audioscience.com
{
type route
slave.pcm dmixs71
slave.channels 8
ttable.0.6 1
ttable.1.7 1
}
--
Eliot Blennerhassett
www.audioscience.com
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Greetings.
can anyone tell me how to find out which processes are using an ALSA
driver and preventing it from being unloaded.
I know that lsof /dev/snd will tell me who has these files open, but
often this shows nothing and still the driver can't be unloaded.
Where else should I look?
Is
{
type route
slave.pcm dmixs71
slave.channels 8
ttable.0.4 1
ttable.1.5 1
}
# Grey jack (doesn't work for me?)
pcm.dmixs71_grey {
type route
slave.pcm dmixs71
slave.channels 8
ttable.0.6 1
ttable.1.7 1
}
--
--
Eliot Blennerhassett
Hi Karl,
When you said
The linux kernel is no longer accepting closed firmware blobs
did you mean to imply that this is new policy?
If so, can you give a reference to where this is documented eg LKML
archive reference.
thanks and regards
Eliot Blennerhassett
www.audioscience.com
Maker
From: Carlos Hernandez [EMAIL PROTECTED]
Subject: [Alsa-user] Send a *.wav into a input device
To: alsa-user@lists.sourceforge.net
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
I was looking for this everywhere to find a solution... no luck... Hope u
Wallace, Brooke wrote:
Anyone know what happend to this howto? Seems like it had some good
information that I can no longer find on the Offical ALSA Wiki...
The URL was: http://www.alsa-project.org/alsa-doc/alsa-howto/c1706.htm
http://www.alsa-project.org/alsa-doc/alsa-howto/c1706.htm
From: Wallace, Brooke [EMAIL PROTECTED]
I was able to unload the remaining snd* modules and then use insmod to
loadup the modules generated by my compile of the alsa-drivers 1.0.14
drop. However I'm not getting any sound now, and some utilities such as
amixer and alsamixer are giving me Seg
On Thursday 09 August 2007 10:54:29 Ash Willis wrote:
The Wiki's looking great. It's obvious that you've thought about where
everything should be and how it should all tie in instead of blinding
porting the old pages. It's looking very fresh and making much more sense.
Thanks for the feedback
Greetings,
IMO the basic content of the static website has been migrated to the wiki.
This doesn't include the following:
* http://alsa-project.org/changes/ Changelogs .txt files are referenced,
assume they are auto generated?
* Contents of http://www.alsa-project.org/alsa/ftp/
* Contents of
Greetings,
I want to make a universal multi mapping. So far I have the following 4
channel version based on
http://www.alsa-project.org/alsa-doc/doc-php/asoundrc.php#jackplug
But it has some shortcomings I'd like to fix, don't know how
Q1: is there any way I can inherit all the @args [ CARD
18 matches
Mail list logo
