Re: [Alsa-user] No sound on internal speaker

for playback. Hope it will help other people. NM On Thu, Jul 30, 2020 at 1:16 AM Alan Corey wrote: > Try using card 1. Look at amixer -c 1 > > On 7/29/20, Nicolas Martin wrote: > > Hi, > > > > I have a Lenovo P520 workstation with an internal speaker on which I

[Alsa-user] No sound on internal speaker

Hi, I have a Lenovo P520 workstation with an internal speaker on which I'd like to play sound. OS installed is RHEL 7U6 with alsa 1.1.6 the internal speaker is enabled in BIOS; however I don't have any sound output on it. The only way to have sound is to plug an external speaker. If I load the

Re: [Alsa-user] Driver for ESI Gigaport HD+ for 24/96 capability

Any suggestion? Nicolas Boisvert ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user

Re: [Alsa-user] Driver for ESI Gigaport HD+ for 24/96 capability

: S16_LE Channels: 8 Endpoint: 1 OUT (ADAPTIVE) Rates: 44100 END FILE Nicolas -Message d'origine- De : Clemens Ladisch via Alsa-user Envoyé : 12 avril 2019 15:31 À : alsa-user@lists.sourceforge.net Objet : Re: [Alsa-user] Driver for ESI Gigaport HD+ for 24/96 capability Ni

[Alsa-user] Driver for ESI Gigaport HD+ for 24/96 capability

ss for the other 6 channels if it means downsampling. Nicolas Boisvert ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user

Re: [Alsa-user] Stub for libpulse

but that should not make any difference). Good news. Regards, -- Nicolas George -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot

[Alsa-user] Stub for libpulse

people here think the same. Does anyone know of a libpulse stub that provides the basic API but routes all the calls directly to libasound / ALSA? I have found this project: https://github.com/i-rinat/apulse but it seems unable to get something as simple as ogg123 working. Regards, -- Nicolas

[Alsa-user] Enabling sound on Baytrail system

:00/uid:1 -> "Intel SSP Device", no module found for this Any help for that would be appreciated. For reference, my current efforts for configuring that hardware are summarized here: http://nsup.org/~george/comp/linux_lenovo_miix3/ Regards, --

[Alsa-user] Enabling sound on Baytrail system

:00/uid:1 -> "Intel SSP Device", no module found for this Any help for that would be appreciated. For reference, my current efforts for configuring that hardware are summarized here: http://nsup.org/~george/comp/linux_lenovo_miix3/ Regards, -- Nicolas George -

[Alsa-user] No sound from Phone Jack on Lenovo Ultra Dock 2013 connected To T440p

Hello, I have a new Lenovo ThinkPad T440p laptop connected to an Ultra Docking Station. Sound works good over Laptop Speakers and Laptops 3,5mm Phone Jack. However that is not the case when I connect the T440p to the Docking station and use the Phone Jack at the Dock. I've tried loading the alsa

Re: [Alsa-user] Help configuring the E-MU 1820m

d capture some sound from Mic A. Thank you very much for the instructions. I'll try them as soon as I have some time to play with my computer (which may wait till end of august) and report back if they don't work. -- Nicolas Mailhot -

[Alsa-user] Help configuring the E-MU 1820m

alsa mixer makes me feel inadequate. (and trying to switch things there does not unmute the microphone input) I'd like to activate: Audiodock mono Mic A input Audiodock stereo Headphone output Audiodock stereo 1, 2, 3 outputs 1010 digital sp-dif (non optical) output Regards, -- Nicolas Mailho

[Alsa-user] Different PCM depending on the number of channels

Hi. Is it possible to make a PCM a that is a proxy (plug, whatever) for different PCM a1 and a2 depending on the number of channels is requested? In other words, I would like: aplay -c 6 -D pcm-a to be equivalent to: aplay -C 6 -D pcm-a1 while: aplay -c 2 -D pcm-a le

Re: [Alsa-user] multi over dmix: no sound

ith the problem. I did not manage to find your feature request. But I believe that if you did nothing wrong, nor I, the problem should be in a bug tracker and not a feature wish list. If it is not possible to use multi to bind two dmix, it should at least be written in the documentation. Regards, --

[Alsa-user] multi over dmix: no sound

all right. But if I send it through the multi PCM, I only get silence. Changing "mixer" to "hw:0" gets the sound back, but loses the mixer. It is true with libasound 1.0.12 and .13 from Debian on two different systems. Does anyone see what I am doing wrong? Regards, --

[Alsa-user] RE : Re: Everything seems OK, but can't use amixer

Thank you Clemens, that was the problem.   I didn't install alsa-lib with the Makefile, but copied directly the required libraries. The configuration files in /usr/share/alsa were missing.   NicolasClemens Ladisch <[EMAIL PROTECTED]> a écrit : nicolas ricard wrote:> I'm tr

[Alsa-user] Everything seems OK, but can't use amixer

HiI'm trying to install and configure alsa support for an embedded device, from scratch (no distro).My config is as follow :- kernel 2.6.13 , sound support selected as module, but no ALSA nor OSS support- ALSA 1.0.13- snd-intel8x0 compatible sound chipsetAfter a system boot, i get the following thi

[Alsa-user] EWX 24/96 Configuration

sounds at once. I am using alsa 0.9.8. Thanks, Nicolas. --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help Y

Re: [Alsa-user] 1.0.0rc2 and snd-intel8x0

At 18:36 08/12/03 +0100, Clemens Ladisch wrote: Nicolas Croiset (VDL) wrote: > We always have no sound... Even if I change the volume with xmixer. Please try alsamixer, and make sure to unmute ('M') and raise the volume of all channels. Hello, I used it in oss mode exclusively so als

[Alsa-user] Installation pb, card echoaudio mia, alsa 1.0.0rc1

Hi folks, It's the first time I post here so please bear with me I've read many documents but I'm stuck and I don't know where to investigate further. I try to setup my soundcard echoaudio Mia with alsa. My environement: - Linux Mandrake 9.2 - Kernel 2.4.22 - Alsa 1.0.0-rc1 - Driver EchoAudio 0

[Alsa-user] 1.0.0rc2 and snd-intel8x0

Hello, I use the card intel 8x0 : cat /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: Analog Devices AD1885 Capabilities : -headphone out- DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : Analog Devices Phat Stereo Current setup Mic gain : +0dB [+0dB] POP path

Re: [Alsa-user] ALSA 1.0.0rc1 released

possible to modify this ? Bye. Nicolas Croiset [EMAIL PROTECTED] Tel : +33 4 72 84 06 04 Fax : +33 4 72 84 06 02 --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive?

[Alsa-user] asoundrc, spdif and nforce on 1.0pre1

Hi, The question is : How config alsa to have spdif used by xine and mplayer. My suspicion: I have no controls IEC958 threw "amixer controls" ??? I just installed last dev release 1.0-pre1 (with alsa-driver-1.0-pre2). Technical data of my hardware and system configurations are at the end of t

[Alsa-user] No way to record. Here is my /etc/asound.state

e file and amixer output.. Thx a lot, Nicolas amixer: Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 22 [71%] [on] Front Right: Playback 22 [71%] [on] Simple m

[Alsa-user] No way to record. Here is my /etc/asound.state

Config: via82xx (vt8235), microphone plugged on "mic in", sound playing is working, using alsa 0.9.1 with 2.4.20 kernel. /etc/asound.state: state.8235 { control.1 { comment.access 'read write' comment.type BOOLEAN iface MIXER nam

[Alsa-user] No recording with VIA82XX on vt8235 (already a lot of tests)

ff] Simple mixer control 'Mono Output Select',0 Capabilities: Mono: Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 11 [73%] [on] Front Right: Capture 11 [73%] [o

[alsa-user] chips ac97

  - Original Message - From: Nicolas Forget To: [EMAIL PROTECTED] Sent: Sunday, April 21, 2002 12:43 PM Subject: [alsa-use] chips ac97 hi everyone, i'm using a msi k7t 266 proII. on this one i have a sound chipset ac97. but i don't know how to use it with alsa... i&#

[Alsa-user] CD doesn make sound and mp3 is not loud enough

Hi I have a Diamond Technologies dt0197H Isa PnP soundcard, which has a CTL1745 chipset When i try to use it, for instance when trying to load an mp3 song, it can play it sucessfully.. but even if i turn the speakers at the highest volume, it doesn sound as loud as when I listen the same Mp3

Re: [Alsa-user] ice1712 setting input gain

Try by using the envy24control utility provided with the alsa-tools package. Le Jeudi 29 Novembre 2001 13:37, gianni a écrit : > hi to everybody, > > I compiled the alsa-driver version 0.5.10b for a Delta 1010 (ice1712). > > I try to record a 12 channels wav file with arecord, everythings ok bu

Re: [Alsa-user] How to upgrade ALSA driver from 0.5.10 to 0.5.12 ?!

Maybe you have not install the kernel sources ? Le Mercredi 28 Novembre 2001 08:11, Joseph Chan a ?crit : > Hi, > I got an ALSA driver problem in SuSE 7.3. (the default driver version is > ALSA 0.5.10) > After uncompressing the "alsa-driver-0.5.12.tar.bz2" , I run > "./configure" , and the er

Re: [Alsa-user] Compiling aplay from alsa-utils-0.9.0beta9 fails

Have you removed your previous version of alsa-lib (v0.5.x) and installed the alsa-lib v0.9beta9 ? Le Mercredi 28 Novembre 2001 07:45, Darren Evans a écrit : > make[1]: Entering directory > `/home/darren/build/alsa-utils-0.9.0beta9/aplay' > gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include

Re: [Alsa-user] Two PCM outputs messup the sound

Hi, I have a similar problem. Do you use the oss emulation or alsa drivers when you are using mpg123 ? If you use alsa, it will open your device (ie your soundcard) and it will not allow other application to use it simultaneously. Arts or esound, which works with oss emulation, allows multiple op

[Alsa-user] aserver

Hi, does anyone can tell me what is the aserver tool provided with the alsa-lib package v0.9beta9 ? Is it a kind of sound wrapper or else specific for alsa ? If so, where can I find a documentation of using this tool ? Thanks, Nicolas ___ Alsa-user

Re: [Alsa-user] use of aplay

process. Does it exist an alsa sound wrapper (aserver maybe ?) in order to play several files in the same time ? Thanks, Nicolas Le Mardi 20 Novembre 2001 17:36, Takashi Iwai a écrit : > At Tue, 20 Nov 2001 16:34:05 +0100, > > Nicolas DEVERGE wrote: > > Hi, > > I'

[Alsa-user] use of aplay

n the other lines (I have 8 output lines on my external box). It seems that aplay provides a device parameter but I don't understand how it works. Thanks a lot, Nicolas ___ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/list

Re: [Alsa-user] Problem with Soundcard Terratec EWS88MT

I install it by entering "make install" It seems to work (my alsa lib is copied in the /usr/lib directory) Then, when I want to compile the alsa utilities, the configure script gives me this messages : [root@nicolas alsa-utils]# ./configure loading cache ./config.cache checking for a

Re: [Alsa-user] Problem with Soundcard Terratec EWS88MT

Hi, I downloaded the latest CVS release of the drivers, but I can not build it. I get the following error : [root@nicolas alsacvs]# ./build prep Pre-configuring alsa-driver aclocal: ../alsa-lib/utils//alsa.m4: 15: duplicated macro `AM_PATH_ALSA' Please help me, Thanks, Le Dimanche 18 Nov

[Alsa-user] Problem with Soundcard Terratec EWS88MT

utoclean) [vfat] rtc 5600 0 (autoclean) dc395x_trm 49868 0 (unused) sd_mod 11572 0 (unused) scsi_mod 91804 2 [dc395x_trm sd_mod] The output of aplay is the following : [root@nicolas root]# aplay /data/track03.cdda.wav Apla