On Fri, 30 May 2008 04:22:37 -0700, phil lemelin [EMAIL PROTECTED]
wrote:
cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA Nvidia at 0xfeaf8000 irq 20
cat /proc/asound/card0/codec#* | grep Codec ( repeat this line for
card0, card1, etc ).
Codec:
On Fri, 30 May 2008 16:07:20 -0700, phil lemelin [EMAIL PROTECTED]
wrote:
Those drivers are pretty new from realtek (
http://www.realtek.com.tw/Downloads/downloadsCheck.aspx?Langid=1PNid=14PFid=24Level=4Conn=3DownTypeID=3GetDown=false)
I suggest you read the readme and do the manual step to
Update:
While messing with the models, I found that I now have two devices
reported by aplay -l:
card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia] device 1: ALC883 Digital [ALC883
On Fri, 30 May 2008 18:58:08 -0700, Lee Revell [EMAIL PROTECTED]
wrote:
Please search the nvidia forums for this issue. HDMI is not
supported on Linux. The behavior seems to be by design. It reeks of
DRM...
I thought I had seen reports from others that they had it working.
What about
On Fri, 30 May 2008 18:58:08 -0700, Lee Revell [EMAIL PROTECTED]
wrote:
Please search the nvidia forums for this issue. HDMI is not
supported on Linux. The behavior seems to be by design. It reeks of
DRM...
So, I go to the Nvidia forum, register, search on HDMI, get some results,
On Fri, 30 May 2008 18:58:08 -0700, Lee Revell [EMAIL PROTECTED]
wrote:
Please search the nvidia forums for this issue. HDMI is not
supported on Linux. The behavior seems to be by design. It reeks of
DRM...
Just FYI, the NVidia forums have very little on Linux at all. Less than 30
?
===Blake===
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01
Is it possible to set the default ALSA device? I have an Audigy2 NX card and
have to create a device (called 48000) to upmix 44000hz sample rates to
48000hz so they sound right. My ~/.asoundrc file looks like this at the
moment...
pcm.48000Hz {
type plug
slave {
pcm hw:0,0
rate 48000
}
Is that a no then?
You would be far ahead if you got a soundcard which was capable of 44100
rate from the word go. Time interpolating will always make your good
soundcard sound like a cheap soundcard-- increase noise and all types of
distortion. And if you are going to do it well (ie not
Isn't it just a case of the Linux driver not supporting the NXs version of
44000 rather than the device not supporting 44000 at all? My guess, as a
software engineer, is that Creative decided not to follow the USB audio
standards and therefore the USB audio drivers don't work correctly.
P.S. You
Thanks. Although I will mention that using plug:48000Hz didn't work. But
I tried AUDIODEV=48000Hz and it works fine. The only problem is it seems
to slow UT2004 down loads when I use SDL as my audio driver. It's barely
playable =o)
Darrell
Yes.
export SDL_AUDIODRIVER=alsa
export
Is is possible to make SDL use ALSA? Also, if so, is it possible to make
SDL use a device you specified yourself in .asoundrc?
Cheers,
Darrell
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by
Would you believe that it was the version of XMMS that I was using! I
can't believe it. I might download the CVS version of ALSA anyway
though. What do you think? I have another question though. I have OSS
emulation enabled because some things only use this (UT2004 for one).
But, obviously,
Is there any way to make a device that you made yourself in .asoundrc
the default playing device? I have a lot of games I want to play that
only use OSS so I'm having to use OSS emulation which only uses the
default device. I have a device called 48000Hz which I defined in
.asoundrc thus...
I'm having trouble getting ALSA to work with XMMS and am hoping someone
can shed some light on it for me. This is my .asoundrc file...
pcm.48000Hz {
type plug
slave {
pcm hw:0,0
rate 48000
}
route_policy default
}
That's it. There's nothing else in there. When I run
rate 48000
}
route_policy default
}
...XMMS crashes.
I've also tried creating speaker.48000Hz and I've also tried putting them
both in but XMMS always crashes with this message...
Broken Pipe
Content-Type: text/plain;
I'll try again. I think my last email screwed up.
You can all ignore the one I sent before about not being able to get the
ALSA plugin for XMMS working. I've got it working but now I have another
problem. I noticed that in the alsamixer there were two things showing
up. PCM and Speaker. So all
I've got my Audigy2 NX working in Linux using the USB Audio ALSA module
but for some reason the sound crackles and seems to be off tone.
Originally I just thought this was a problem with the module but my
friends says it happend to him too and he's just using a normal SB Live!
card with the
18 matches
Mail list logo
