Michael Bourgeous gmail.com> writes:
>
Hi Michael, thank you for the infos.
> My US-428 works great, but with the following caveats:
>
> - After using jack with the 4-channel input, I have to power cycle the
> device to use it with anything else.
> - In order to get latency below 10-20ms with
Rui Nuno Capela rncbc.org> writes:
>
> On Wed, February 21, 2007 01:11, gtrfree wrote:
>
> > jackd 0.102.20
>
> THis jackd version does NOT include a crucial patch that makes the us428
> "rawusb" work properly with 4 input channels. Try newer from SVN plea
Lee Revell joe-job.com> writes:
>
Hi Lee,
(snip)
> Did you load snd-usb-usx2y with "nrpacks=1"?
Yes.
> What happens if you try to use JACK with hw:1,2?
jackd -dalsa -dhw:1,2
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free softwar
Bill Unruh physics.ubc.ca> writes:
>
> On Sun, 18 Feb 2007, gtrfree wrote:
>
> > Bill Unruh physics.ubc.ca> writes:
(snip)
> I have no idea what 20 bits means. The manual I saw says 24 bits.
Bill, you're right, it's 24 bits. I was so happy to hear th
Bill Unruh physics.ubc.ca> writes:
(snip)
> >> Does anybody on-list have a fully functioning Tascam US-428 including
> >> the use of all four inputs?
Hi Bill.
> As far as I can see, the tascam 418 is a usb1 device.
Right.
> The bandwidth is
> simply not there to use all 4 inputs. 24 bits ( u
Matt Savigear savigear.com> writes:
>
> Hi,
>
> Despite various hints on the web to the contrary, it seems my researches
> cannot come up with any way of getting my Tascam-428 USB unit to use
> all four inputs under jack simultaneously (despite use of the hw:1,2
> rawusb device). Before I keep
rd: main:547: audio open error: device busy
Running jackd, it can't open 'hw:1,1' and 'hw:1,2' is already in use.
If I add '-i 4' I get:
ALSA: cannot set channel capture count to 4 for capture
ALSA: cannot configure capture channel
cannot load driver mod
Hi all, some infos:
suse 10.1 32bit
alsa 1.0.11-32
alsa-firmware 1.0.10-13
alsa-tools 1.0.11-16
jack 1.101.1 (new 'cause I read there's a better support for us428 in new
versions)
I load the firmware with usx2yloader, then i run us428control. Everything seems
fine: 1-2 ins, midi in and