Hi,
I am new to this sound card under linux. When I check the amixer
contents, there are 64 channels available from numid 24 to numid 87.
Does anyone knows which channels are for output channels and which are
for input channels?
Yours
Arthur
-
At Tue, 04 Mar 2008 17:57:15 +,
James Courtier-Dutton wrote:
>
> Takashi Iwai wrote:
> > At Tue, 4 Mar 2008 15:03:15 +,
> > James Courtier-Dutton wrote:
> >>> > Now that we have these dB gain levels, we could potentially set all
> >>> > mixer controls to 0dB, i.e. not gain and not attenu
Takashi Iwai wrote:
> At Tue, 4 Mar 2008 15:03:15 +,
> James Courtier-Dutton wrote:
>>> > Now that we have these dB gain levels, we could potentially set all
>>> > mixer controls to 0dB, i.e. not gain and not attenuation, with only
>>> > the master output control being set to a lower value s
Takashi Iwai wrote:
> hdspm driver still doesn't support TLV dB information.
> In addition, rme9652/hdsp/hdspm drivers use control elements in a
> non-standard way for indirect accessing, so each mixer value isn't
> visible in amixer or alsactl.
Hello Takashi,
Can you tell whether the hdspm driv
James Courtier-Dutton wrote:
> Some time ago, there was no way to tell, from user space, if 100%
> or 50% was 0db, -50dB or +50dB. As a result, the safest value to
> use was the minimum value being either 0% or mute. That has changed
> with alsa 1.0.16, as dB gain information is now available.
I'
At Tue, 4 Mar 2008 15:03:15 +,
James Courtier-Dutton wrote:
>
> > > Now that we have these dB gain levels, we could potentially set all
> > > mixer controls to 0dB, i.e. not gain and not attenuation, with only
> > > the master output control being set to a lower value so as to avoid
> > >
On 04/03/2008, John Sigler <[EMAIL PROTECTED]> wrote:
> James Courtier-Dutton wrote:
>
> > John Sigler wrote:
> >
> >> I have an RME AES-32 PCI board.
> >> http://www.rme-audio.de/en_products_hdsp_aes32.php
> >>
> >> When I boot, every channel has its volume set to 0.
> >>
>
> >> http://lxr.
James Courtier-Dutton wrote:
> John Sigler wrote:
>
>> I have an RME AES-32 PCI board.
>> http://www.rme-audio.de/en_products_hdsp_aes32.php
>>
>> When I boot, every channel has its volume set to 0.
>>
>> http://lxr.linux.no/linux/sound/pci/rme9652/hdspm.c#L3396
>> http://lxr.linux.no/linux/sou
On 03/03/2008, John Sigler <[EMAIL PROTECTED]> wrote:
> (I'll try answering some of my questions.)
>
>
> John Sigler wrote:
>
> > I have an RME AES-32 PCI board.
> > http://www.rme-audio.de/en_products_hdsp_aes32.php
> >
>
> > [...]
>
> >
> > When I boot, every channel has its volume set to 0.
(I'll try answering some of my questions.)
John Sigler wrote:
> I have an RME AES-32 PCI board.
> http://www.rme-audio.de/en_products_hdsp_aes32.php
>
> [...]
>
> When I boot, every channel has its volume set to 0.
> Is this done by the board's firmware?
http://lxr.linux.no/linux/sound/pci/rme
John Sigler wrote:
I used amixer to change the volume.
I've attached the output of amixer and amixer contents in case
they are relevant.
Regards.
Simple mixer control 'Line Out',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'AES
Hello,
I have an RME AES-32 PCI board.
http://www.rme-audio.de/en_products_hdsp_aes32.php
I installed the main board only (not the daughter board) which gives
me 8 mono in's and 8 mono out's (4 male + 4 female XLR connectors).
My kernel is 2.6.22.1-rt9 (compiled from source).
I have set the f
Hi All
I try to use an RME AES-32 under Gentoo, Alsa 0.14-rc1, kernel
2.6.20-rc1 but with this message when Kack starts :
ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to
capture-only mode
cannot load driver modul
13 matches
Mail list logo
