Dear all,

Have been trying to get an old Compaq working for a portable recording
solution with an RME Multiface DSP.  Why?  Well the original disc crashed
and I don't want to reinstall Windows and set up Cubase (which works fine
with the RME) but would prefer to try Linux and Rosegarden (or something
similar).  Did a bit of background reading beforehand and worried that
nobody actually had a PCMCIA card working under Linux then came across a
couple of references on this list, so I think it DOES work.  

Went back to first principals, I think, and recompiled the kernel and
modules (under openSuse 10.1) linking in only those modules I needed (the
one for the Evo sound (snd-intel8x0) and the rme-hdsp module (snd-hdsp).
Whilst I have managed to get the internal card working (in a fashion) I have
been having trouble getting the system to recognise that the hdsp is
installed or is it the module for the hdsp is installed.  For example under
the Yast Control Center/Hardware/Sound it lists the RME as not configured
although recognises it as being there and when you try to edit the
configuration it bombs out with the message:-

 "An error occurred during the installation of the RME Hammerfall DSP.  The
kernel module snd-hdsp for sound support could not be loaded.  This can be
caused by incorrect module parameters, including invalid IO or IRQ
parameters."

Whilst this is useful I have not been able to find any reference to any
parameters that I should be using or where they should go
(/etc/modules.d/sound?).  I have also found it difficult to understand how
JACK works but then it doesn't recognise that the RME exists so it doesn't
really surprise me. One interesting problem is that when I try to load Muse
it says it requires JACK but when I run QjackCtl it says direct access to
sound devicve is not possible and drops out.  Interestingly the HDSPMixer
programme now does load after manageing to get ALSA working and the
Multiface recognised (the red led on the panel extinguishes when loading
Linux).

Any help would be appreciated, I'm a bit baffled and could be something
really simple (like the sound module not having been compiled or something).
I have provided a listing of most of the recent requests for system info
after the signature to give an idea of the system and how it is set up as
well as the output when I try to run hdsploader.  If there is anything else
I need to provide I'm more than happy (although it might be a day before I
post a reply).


regards,
Tim Barker.

mailto:timbarkerATiprimusDOTcomDOTau


----------------------------------------------------------------------------
--
beginning of listings
----------------------------------------------------------------------------
--

# lspci

00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host
Bridge (rev 04) 
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP
Bridge (rev 04) 
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) 
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97
Audio Controller (rev 02) 
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7
LW [Radeon Mobility 7500] 
02:04.0 Communication controller: Agere Systems LT WinModem (rev 02) 
02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link) 
02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 02) 
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE
(LOM) Ethernet Controller (rev 42) 
02:0e.0 USB Controller: NEC Corporation USB (rev 41) 
02:0e.1 USB Controller: NEC Corporation USB (rev 41) 
02:0e.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 
03:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP
(rev 0b)

more /proc/cpuinfo


processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz
stepping        : 4
cpu MHz         : 1200.000
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 2396.23

# more /proc/devices


Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  6 lp
  7 vcs
 10 misc
 13 input
 14 sound
 29 fb
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb
189 usb_device
254 pcmcia

Block devices:
  1 ramdisk
  2 fd
  3 ide0
  7 loop
 22 ide1
254 device-mapper

# more /proc/modules


nls_utf8 2176 1 - Live 0xd2085000
cifs 206108 1 - Live 0xd2138000
vfat 11776 0 - Live 0xd205d000
fat 46876 1 vfat, Live 0xd2092000
snd_seq_dummy 3844 0 - Live 0xd2067000
af_packet 19720 2 - Live 0xd2061000
cpufreq_ondemand 6176 1 - Live 0xd1fed000
cpufreq_userspace 3988 0 - Live 0xd1f72000
cpufreq_powersave 1920 0 - Live 0xd1f7d000
acpi_cpufreq 5640 1 - Live 0xd1fce000
freq_table 4356 1 acpi_cpufreq, Live 0xd1fcb000
ipv6 219008 18 - Live 0xd20c3000
snd_pcm_oss 43264 0 - Live 0xd2077000
snd_mixer_oss 16384 1 snd_pcm_oss, Live 0xd1fe8000
snd_seq 47600 4 snd_seq_dummy, Live 0xd206a000
snd_seq_device 8204 2 snd_seq_dummy,snd_seq, Live 0xd1fe4000 edd 8644 0 -
Live 0xd1fe0000 apparmor 48924 0 - Live 0xd1ff0000 aamatch_pcre 13568 1
apparmor, Live 0xd1fc6000 loop 14728 0 - Live 0xd1fc1000 dm_mod 52840 0 -
Live 0xd1fd2000 usbhid 40032 0 - Live 0xd1f4f000 shpchp 39488 0 - Live
0xd1f37000 pci_hotplug 24372 1 shpchp, Live 0xd1f22000 ohci1394 29488 0 -
Live 0xd1f19000 ieee1394 88120 1 ohci1394, Live 0xd18e9000 intel_agp 21020 1
- Live 0xd1881000 agpgart 29232 1 intel_agp, Live 0xd18e0000 i8xx_tco 7060 0
- Live 0xd0878000 ide_cd 35488 0 - Live 0xd18d6000 cdrom 32544 1 ide_cd,
Live 0xd18ab000 ohci_hcd 17540 0 - Live 0xd1888000 ehci_hcd 27144 0 - Live
0xd1898000 usbcore 109700 4 usbhid,ohci_hcd,ehci_hcd, Live 0xd18ba000
parport_pc 35044 1 - Live 0xd188e000 lp 10948 0 - Live 0xd087b000 parport
32328 2 parport_pc,lp, Live 0xd0847000 fan 4740 0 - Live 0xd0833000 thermal
13576 0 - Live 0xd0842000 processor 22852 2 acpi_cpufreq,thermal, Live
0xd086f000 piix 9220 0 [permanent], Live 0xd083e000 ide_disk 15104 8 - Live
0xd0839000 ide_core 116412 3 ide_cd,piix,ide_disk, Live 0xd0851000

# more /proc/interrupts


           CPU0       
  0:     403844          XT-PIC  timer
  1:       3246          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:     126319          XT-PIC  Intel 82801CA-ICH3
  7:          2          XT-PIC  parport0
  8:          2          XT-PIC  rtc
  9:       4253          XT-PIC  acpi
 10:       4462          XT-PIC  ehci_hcd:usb1, ohci_hcd:usb2,
ohci_hcd:usb3, eth0
 11:          4          XT-PIC  yenta, ohci1394, hdsp
 12:       4934          XT-PIC  i8042
 14:      45275          XT-PIC  ide0
 15:      14171          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0

# ls /proc/asound/card* -l

-r--r--r-- 1 root root 0 Nov 15 22:10 /proc/asound/cards

/proc/asound/card0:
total 0
dr-xr-xr-x 2 root root 0 Nov 15 22:10 codec97#0
-r--r--r-- 1 root root 0 Nov 15 22:10 id
-r--r--r-- 1 root root 0 Nov 15 22:10 intel8x0
-rw-r--r-- 1 root root 0 Nov 15 22:10 oss_mixer
dr-xr-xr-x 3 root root 0 Nov 15 22:10 pcm0c
dr-xr-xr-x 3 root root 0 Nov 15 22:10 pcm0p
dr-xr-xr-x 3 root root 0 Nov 15 22:10 pcm1c

/proc/asound/card1:
total 0
-r--r--r-- 1 root root 0 Nov 15 22:10 id
-rw-r--r-- 1 root root 0 Nov 15 22:10 oss_mixer

# dmesg


Linux version 2.6.16.21.snd-0.25-trb-sound ([EMAIL PROTECTED]) (gcc version
4.1.0 (SUSE Linux)) #1 Sat Nov 11 22:26:47 EST 2006 BIOS-provided physical
RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
 BIOS-e820: 000000000ffd0000 - 000000000fff0c00 (reserved)
 BIOS-e820: 000000000fff0c00 - 000000000fffc000 (ACPI NVS)
 BIOS-e820: 000000000fffc000 - 0000000010000000 (reserved) 255MB LOWMEM
available. No mptable found. On node 0 totalpages: 65488
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 61392 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ004A  0x25060220 CPQ  0x00000001) @ 0x0fff0c84
ACPI: FADT (v002 COMPAQ CPQ004A  0x00000002 CPQ  0x00000001) @ 0x0fff0c00
ACPI: SSDT (v001 COMPAQ  CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x0fff663b
ACPI: SSDT (v001 COMPAQ  CPQCroc 0x00001001 MSFT 0x0100000e) @ 0x0fff6749
ACPI: DSDT (v001 COMPAQ  EVON800 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 20000000 (gap: 10000000:f0000000) Built
1 zonelists Kernel command line: root=/dev/hda5 vga=0x317 resume=/dev/hda7
splash=silent PROFILE=default
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic" Enabling fast
FPU save and restore... done. Enabling unmasked SIMD FPU exception
support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10,
16384 bytes) Detected 1694.841 MHz processor. Using tsc for high-res
timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache
hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253476k/261952k available (1859k kernel code, 7824k reserved, 767k
data, 160k init, 0k highmem) Checking if this processor honours the WP bit
even in supervisor mode... Ok. Calibrating delay using timer specific
routine.. 3394.66 BogoMIPS (lpj=6789334) Security Framework v1.0.0
initialized Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000
00000000 00000000 Intel machine check architecture supported. Intel machine
check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04 Checking 'hlt'
instruction... OK. checking if image is initramfs... it is Freeing initrd
memory: 2192k freed  not found!
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS32 entry (0xc00f0000) in high memory, cannot use.
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03B] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.C03B] bus is 0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try
'pci=assign-busses') Please report the result to linux-kernel to fix this
permanently
ACPI: PCI Interrupt Routing Table [\_SB_.C03B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C03C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C04D._PRT]
ACPI: Embedded Controller [C0CF] (gpe 29) interrupt mode.
ACPI: Power Resource [C142] (off)
ACPI: Power Resource [C156] (off)
ACPI: Power Resource [C15A] (off)
ACPI: Power Resource [C15E] (off)
ACPI: Power Resource [C167] (on)
ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B6] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11)
ACPI Warning (pci_link-0118): Blank IRQ resource [20060127] ACPI Error
(pci_link-0163): Resource is not an IRQ entry  [20060127]
ACPI: PCI Interrupt Link [C0BA] (IRQs) *0, disabled.
ACPI Warning (pci_link-0118): Blank IRQ resource [20060127] ACPI Error
(pci_link-0163): Resource is not an IRQ entry  [20060127]
ACPI: PCI Interrupt Link [C0BB] (IRQs) *0, disabled.
ACPI Warning (pci_link-0118): Blank IRQ resource [20060127] ACPI Error
(pci_link-0163): Resource is not an IRQ entry  [20060127]
ACPI: PCI Interrupt Link [C0BC] (IRQs) *0, disabled.
ACPI: Power Resource [C0CE] (on)
ACPI: Power Resource [C1D3] (off)
ACPI: Power Resource [C1D4] (off)
ACPI: Power Resource [C1D5] (off)
ACPI: Power Resource [C1D6] (off)
ACPI: Power Resource [C1E1] (off)
ACPI: Power Resource [C1E2] (off)
ACPI: Power Resource [C1E3] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report TC classifier action (bugs to netdev@vger.kernel.org cc
[EMAIL PROTECTED]) Setting up standard PCI resources
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: 40400000-404fffff
  PREFETCH window: 48000000-4fffffff
PCI: Bus 3, cardbus bridge: 0000:02:06.0
  IO window: 00002800-000028ff
  IO window: 00002c00-00002cff
  PREFETCH window: 20000000-21ffffff
  MEM window: 24000000-25ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-2fff
  MEM window: 40000000-403fffff
  PREFETCH window: 20000000-21ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [C0B8] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0B8] -> GSI 11 (level, low) ->
IRQ 11
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1163626950.692:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing
Cryptographic API io scheduler noop registered io scheduler anticipatory
registered io scheduler deadline registered io scheduler cfq registered
(default) radeonfb_pci_register BEGIN
ACPI: PCI Interrupt Link [C0B5] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0B5] -> GSI 11 (level, low) ->
IRQ 11 radeonfb (0000:01:00.0): Found 32768k of DDR 64 bits wide videoram
radeonfb (0000:01:00.0): mapped 16384k videoram
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=183.00
MHz
radeonfb: PLL min 12000 max 35000
1 chips in connector info
 - chip 1 has 1 connectors
  * connector 0 of type 2 (CRT) : 2300
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 3) ... not found
radeonfb: I2C (port 4) ... found LVDS panel
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 4) ... found LVDS panel
radeonfb: I2C (port 3) ... not found
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: AUO B141XG03
radeonfb: detected LVDS panel size from BIOS: 1024x768
BIOS provided panel power delay: 1000
radeondb: BIOS provided dividers will be used
ref_divider = 6
post_divider = 2
fbk_divider = 3a
Scanning BIOS table ...
 320 x 350
 320 x 400
 320 x 400
 320 x 480
 400 x 600
 512 x 384
 640 x 350
 640 x 400
 640 x 475
 640 x 480
 720 x 480
 720 x 576
 800 x 600
 848 x 480
 1024 x 768
Found panel in BIOS table:
  hblank: 296
  hOver_plus: 16
  hSync_width: 136
  vblank: 35
  vOver_plus: 3
  vSync_width: 6
  clock: 6500
Setting up default mode based on panel info
radeonfb: Dynamic Clock Power Management enabled
hStart = 1040, hEnd = 1176, hTotal = 1320
vStart = 771, vEnd = 777, vTotal = 803
h_total_disp = 0x7f00a4    hsync_strt_wid = 0x11040a
v_total_disp = 0x2ff0322           vsync_strt_wid = 0x60302
pixclock = 15384
freq = 6500
Console: switching to colour frame buffer device 128x48 radeonfb
(0000:01:00.0): ATI Radeon LW 
radeonfb_pci_register END
vesafb: cannot reserve video memory at 0x48000000
vesafb: framebuffer at 0x48000000, mapped to 0xd1900000, using 6144k, total
32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:53db
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb1: VESA VGA frame buffer device
ACPI: AC Adapter [C11B] (on-line)
ACPI: Battery Slot [C11E] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [C17A]
ACPI: Sleep Button (CM) [C120]
ACPI: Lid Switch [C11F]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
cs5535_gpio: DIVIL not found
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available
on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
PNP: PS/2 Controller [PNP0303:C164,PNP0f13:C165] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a NS16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [C0B9] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [C0B9] -> GSI 10 (level, low) ->
IRQ 10
e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr 00:08:02:B9:EA:BD
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0B8] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004e]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x012c1202, devctl 0x64
Yenta: ISA IRQ mask 0x00b8, PCI irq 11
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x403fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: CardBus card inserted into slot 0
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x336ab1, caps: 0x984793/0x0
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: PC Speaker as /class/input/input2
Advanced Linux Sound Architecture Driver Version 1.0.11rc3 (Sun Jan 22
09:27:15 2006 UTC).
ACPI: PCI Interrupt Link [C0B6] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0B6] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 54732 usecs
intel8x0: clocking to 48000
PCI: Enabling device 0000:03:00.0 (0080 -> 0082)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [C0B8] -> GSI 11 (level, low) ->
IRQ 11 ALSA /usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:771:
Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations ALSA
/usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:4937: Hammerfall-DSP:
couldn't get firmware from userspace. try using hdsploader ALSA
/usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:4943: Hammerfall-DSP:
card initialization pending : waiting for firmware ALSA device list:
  #0: Intel 82801CA-ICH3 with AD1886A at 0x4000, irq 5
  #1: RME Hammerfall DSP at 0x24000000, irq 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP
established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash
table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices: 
C04D C09F C0A5 C0A8 C164 C165 C17A C120 
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 160k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0B7] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0B7] -> GSI 11 (level, low) ->
IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio Probing
IDE interface ide0...
hda: FUJITSU MHV2080AH, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Probing IDE interface ide1...
hdc: Compaq DVD-ROM GDR-8081N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (29 C)
ACPI: Thermal Zone [TZ2] (28 C)
ACPI: Thermal Zone [TZ3] (23 C)
ACPI: Fan [C1D7] (off)
ACPI: Fan [C1D8] (off)
ACPI: Fan [C1D9] (off)
ACPI: Fan [C1DA] (off)
ACPI: Fan [C1E4] (off)
ACPI: Fan [C1E5] (off)
ACPI: Fan [C1E6] (off)
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Generic Mouse as /class/input/input3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:02:0e.2[C] -> Link [C0B9] -> GSI 10 (level, low) ->
IRQ 10 ehci_hcd 0000:02:0e.2: EHCI Host Controller
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:0e.2: irq 10, io mem 0x40380000 ehci_hcd 0000:02:0e.2: USB
2.0 started, EHCI 0.95, driver 10 Dec 2004 usb usb1: new device found,
idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3,
Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1:
Manufacturer: Linux 2.6.16.21.snd-0.25-trb-sound ehci_hcd usb usb1:
SerialNumber: 0000:02:0e.2 usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0B9] -> GSI 10 (level, low) ->
IRQ 10 ohci_hcd 0000:02:0e.0: OHCI Host Controller ohci_hcd 0000:02:0e.0:
new USB bus registered, assigned bus number 2 ohci_hcd 0000:02:0e.0: irq 10,
io mem 0x40180000 usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2:
Product: OHCI Host Controller usb usb2: Manufacturer: Linux
2.6.16.21.snd-0.25-trb-sound ohci_hcd usb usb2: SerialNumber: 0000:02:0e.0
usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected i8xx TCO timer: initialized (0x1060).
heartbeat=30 sec (nowayout=0) Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 256M @ 0x60000000
ACPI: PCI Interrupt 0000:02:0e.1[B] -> Link [C0B9] -> GSI 10 (level, low) ->
IRQ 10 ohci_hcd 0000:02:0e.1: OHCI Host Controller ohci_hcd 0000:02:0e.1:
new USB bus registered, assigned bus number 3 ohci_hcd 0000:02:0e.1: irq 10,
io mem 0x40200000
ieee1394: Initialized config rom entry `ip1394'
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3:
Product: OHCI Host Controller usb usb3: Manufacturer: Linux
2.6.16.21.snd-0.25-trb-sound ohci_hcd usb usb3: SerialNumber: 0000:02:0e.1
usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usb 2-2: new low speed USB device using ohci_hcd and address 2
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb 2-2: new device found, idVendor=045e, idProduct=0039
usb 2-2: new device strings: Mfr=1, Product=3, SerialNumber=0 usb 2-2:
Product: Microsoft 5-Button Mouse with IntelliEye(TM) usb 2-2: Manufacturer:
Microsoft usb 2-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [C0B7] -> GSI 11 (level, low) ->
IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[40280000-402807ff]
Max Packet=[2048]  IR/IT contexts=[4/8]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random: RNG not detected
usbcore: registered new driver hiddev
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input4
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM)] on usb-0000:02:0e.0-2
usbcore: registered new driver usbhid
/usr/src/linux-2.6.16.21-0.25/drivers/usb/input/hid-core.c: v2.6:USB HID
core driver
pccard: card ejected from slot 0
PCMCIA: socket cfe5b828: *** DANGER *** unable to remove socket power
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000802719cb9f14d]
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0080 -> 0082)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [C0B8] -> GSI 11 (level, low) ->
IRQ 11 ALSA /usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:771:
Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations ALSA
/usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:4937: Hammerfall-DSP:
couldn't get firmware from userspace. try using hdsploader ALSA
/usr/src/linux-2.6.16.21-0.25/sound/pci/rme9652/hdsp.c:4943: Hammerfall-DSP:
card initialization pending : waiting for firmware
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [EMAIL PROTECTED]
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1163626970.597:2): AppArmor (version 2.0-19.43r6320) initialized

Adding 746980k swap on /dev/hda7.  Priority:-1 extents:1 across:746980k BIOS
EDD facility v0.16 2004-Jun-25, 1 devices found IA-32 Microcode Update
Driver: v1.14 <[EMAIL PROTECTED]>
microcode: CPU0 updated from revision 0xd to 0x20, date = 06052003 
IA-32 Microcode Update Driver v1.14 unregistered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
powernow: This module only works with AMD K7 CPUs
acpi-cpufreq: CPU0 - ACPI performance management activated.
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
eth0: no IPv6 routers present

# lsmod | grep snd


snd_seq_dummy           3844  0 
snd_pcm_oss            43264  0 
snd_mixer_oss          16384  1 snd_pcm_oss
snd_seq                47600  4 snd_seq_dummy
snd_seq_device          8204  2 snd_seq_dummy,snd_seq

# cat /proc/asound/cards


 0 [I82801CAICH3   ]: ICH - Intel 82801CA-ICH3
                      Intel 82801CA-ICH3 with AD1886A at 0x4000, irq 5
 1 [DSP            ]: H-DSP - Hammerfall DSP
                      RME Hammerfall DSP at 0x24000000, irq 11

# list /etc/modprobe.d/sound


options snd-hdsp enable=1 index=1
options snd-intel8x0 enable=1 index=0

# W60f.todpjxGmeLF:82801CA/CAM AC'97 Audio Controller
alias snd-card-0 snd-intel8x0
alias snd-card-1 snd-hdsp


# fuser /dev/dsp ; fuser /dev/snd/*

/dev/snd/controlC0: 3313
/dev/snd/pcmC0D0c:  3313m
/dev/snd/pcmC0D0p:  3313m
/dev/snd/seq:       3311  3313

# hdsploader

hdsploader - firmware loader for RME Hammerfall DSP cards 
Looking for HDSP + Multiface or Digiface cards : 
Card 0 : Intel 82801CA-ICH3 with AD1886A at 0x4000, irq 5 
Card 1 : RME Hammerfall DSP at 0x24000000, irq 11 
Upload firmware for card hw:1 
Hwdep ioctl error on card hw:1  : Input/output error


----------------------------------------------------------------------------
--
end of listings
----------------------------------------------------------------------------
--


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to