* John R. Jackson [EMAIL PROTECTED] (Tue, Jul 24, 2001 at 03:15:42PM -0500)
And remember that when you need to make mods to a Makefile, they need to
be to Makefile.am (which is only in the CVS), not Makefile.in. Which,
in turn, means you need to be conversant with automake (another of life's
I've pressed the send button too quickly and sent the answer to John only - here
is a copy for the mailing list...
Christina
Hi John,
John R. Jackson wrote:
This is the content of our tapelist file. I think it should have more than
one line?!?
20010725 NEURO007 reuse
Ooops.
All
had several responses to this, but the way that worked the best was to
treat it as an smbclient.
'root' had access to the device on the nfs mount, but it still didn't
seem to like it. Maybe I should upgrade the 2.4.2p2 and try again, but
at the moment it works so i shan't fix it :-)
Hi,
I'm trying to get a Onstream ADR30i SCSI drive to under Debian 2.2
with kernel 2.2.19 and Amanda 2.4.1p1. I have an Inition controller
and the drive is all new.
It works fine when I do a amdump, but amverify doesnt work. I get the
following errors:
st0: error with sense data: Info fld=0x1,
So how do I get the CVS version (2.4.2 preferably) ?
http://amanda.sourceforge.net/fom-serve/cache/136.html
http://amanda.sourceforge.net/fom-serve/cache/156.html
http://amanda.sourceforge.net/fom-serve/cache/170.html
You want -ramanda-242-branch.
You will need a very recent version of
this just popped up the other day, and happened again with last
night's run. i don't recall if i changed anything, but i am
assuming that i must have.
here are two error lines typical of the two types (local and
smb) of shares:
thehost //axon/Users lev 0 FAILED [badly formatted response
How do you apply this patch?
patch -l client-src/getfsent.h advfs.diff
Travis
hello all.
i've searched around and i can't seem to find too much regarding
this subject. the server that runs amandad also backs itself up, and
none of the shares local to the backup server, in addition to the
smbclient windows shares it backs up are not being backed up due to
this type of
Two letters just came in with the same Subject but (somewhat) different
From: values. I'm hoping they are really from the same person.
here are two error lines typical of the two types (local and
smb) of shares:
thehost //axon/Users lev 0 FAILED [badly formatted response from thehost]
Hi, I'm an amanda newbie running it on a Solaris 8 server with a Sun
STORedge L9 tape drive and controller (that's actually a Quantum DLT
8000 tape drive coupled with HP Changer robotics).
The problem I have is with the tape changer, it seems that amcheck,
amtape and other programs don't
Two letters just came in with the same Subject but (somewhat) different
From: values.
i apologize. i was having much trouble with the list and tried
sending through egroups (yahoo).
There are a couple of possibilities. One is that you've added some
disks and the request (or corresponding
When I tried installing the above patch, I got this error while running
make and make install. Would amanda still work?
Making install in client-src
/sbin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../config -I../common-src-g -c -o getfsent.lo getfsent.c
cc
When I tried installing the above patch, I got this error while running
make and make install. ...
Are you sure you are working with the 2.4.2p2 sources?
Would amanda still work?
Not likely.
John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
Hello Amanda Users,
I'm trying to dump the entire contents of the host onto the holding disk,
but I got this error:
./amdump set1
insert tape into slot 0 and press return
When I ran amcheck before running amdump this is the result:
./amcheck set1
Amanda Tape Server Host Check
Hi, I'm an amanda newbie running it on ...
What version of Amanda?
amcheck-server: slot error: could not read result from
/usr/local/libexec/chg-zd-mtx
What happens if you do this (as the Amanda user):
cd directory-with-amanda.conf
/usr/local/libexec/chg-zd-mtx -reset
When ever I run amcheck I get the following error:
ERROR: wildcat: [can not access hdb1 (hdb1): No such file or directory]
In my disklist file if I put a / instead of the device name amcheck runs
fine, but when I run amdump and try and back up the device I get the
following error message:
Fellas-
My indexes aren't being created. Specifically, the files are being
created, but not populated with index data (from client host albatross
sendbackup debug):
sendbackup: started index creator: /usr/sbin/ufsrestore -tvf - 21 |
sed -e '
s/^leaf[ ]*[0-9]*[ ]*\.//
t
17 matches
Mail list logo