Title: SMSNET MELODI GRAFIK HABERLER
03 Temmuz 2003www.melodilerim.com /www.polimelodi.com /www.grafiklerim.comRenkli Operatör Logosu Nedir ? Renkli Operatör Logosu, eski Nokia telefonlarda kullanýlan siyah beyaz operatör logolarýnýn çok daha büyük ve renkli olan yeni nesil versiyonudur. Hangi
As far as I know amanda cannot handle reiserfs, when using dump. You have to
configure tar.
Rainer
Am Samstag, 5. Juli 2003 01:29 schrieb Sterpu Victor:
I have succesfuly installed amanda.
However, on the servers I have installed drbd.
And it seems that amanda does not hork with drbd.
Or
Steven J. Backus wrote:
The only compression option I can see on my mt is defcompression,
so to turn it off is:
/bin/mt -f device defcompression 0
correct?
Yes, but maybe it's not enough, see:
http://groups.yahoo.com/group/amanda-users/message/44453
Michael D. Schleif wrote:
Also, what is the best way to turn off compression?
...
Will this persist across power cycles? Will previously hardware
compressed tapes turn hardware compression back on?
See also:
http://groups.yahoo.com/group/amanda-users/message/44453
On Saturday 05 July 2003 06:47, Sterpu Victor wrote:
Works. Thank you.
But.
My partition that I want to backup has 30G(only 13G are used).
My tape has 20G uncompressed, 40G compressed.
My dump type:
define dumptype comp-high {
global
program GNUTAR
comment very important partitions on
Michael D. Schleif wrote:
I am curious as to a procedure of manually -- without amanda -- viewing
and restoring from amanda-written tapes . . .
There is a good explanation of all the possible restore scenario's
in docs/RESTORE.
--
Paul Bijnens, XplanationTel +32 16
Michael D. Schleif wrote:
Also sprach Joshua Baker-LePain (Thu 03 Jul 02003 at 05:41:32PM -0400):
On Thu, 3 Jul 2003 at 4:20pm, Michael D. Schleif wrote
Also, using only amrestore, is it possible to get at individual
files/directories, or is it only a matter of restoring the entire
dump/tarball?
James Williamson wrote:
We've got Amanda set up to backup to a Onstream tape driver (SC-30),
Are you aware there are two generations of Onstream tape drives?
The first generation had firmware problems, which made it unusable.
The company went down since, and you cannot get a firware upgrade.
The
Hello there,
I have a problem with the amanda backup.
Amanda is totally stop working after I amflush all the logfiles in
/usr/am_dump.
When I execute amcleanup, the messages shown as below:
amcleanup: no unprocessed logfile to clean up.
Scanning /usr/am_dump...
When I execute amcheck, here is
Hi there,
yes and no...
the problem is not in amanda it is in linux-dump.
if you read the manpage of dump the first lines tell you:
NAME
dump - ext2 filesystem backup
this should be clear enough..
Christoph
Rainer Hofmann wrote:
As far as I know amanda cannot handle reiserfs, when
Also sprach Paul Bijnens (Fri 04 Jul 02003 at 10:51:47AM +0200):
snip /
In docs/RESTORE, you can find all the commands you need to use
an amanda tape without amanda software.
That is an excellent document! I'm sorry that I bothered the list
before finding and reading it . . .
--
Best
Thanks for your help,
James Williamson wrote:
We've got Amanda set up to backup to a Onstream tape driver (SC-30),
Are you aware there are two generations of Onstream tape drives?
Yes, I've got the second generation.
when we run amdump it reports that it's successully backed up the
I had amanda up and
running only to discover that the machine acting as host didn't have enough HD
capacity to run Amanda smoothly. The project layed low for several weeks until I
got hold of a new and bigger machine.
Installed RedHat 9.0
on it and installed amanda and mtx
started
- Original Message -
From: Mikkel Gadegaard
To: [EMAIL PROTECTED]
Sent: Friday, July 04, 2003 3:20 PM
Subject: repost (still need some help) :-)
I had amanda up and running only to discover that the machine acting as host
didn't have enough HD capacity to run Amanda smoothly. The
On Friday 04 July 2003 10:20, Mikkel Gadegaard wrote:
I had amanda up and running only to discover that the machine acting
as host didn't have enough HD capacity to run Amanda smoothly. The
project layed low for several weeks until I got hold of a new and
bigger machine.
Installed RedHat 9.0
James Williamson wrote:
I've been doing some more experimenting / research and it looks like
it's a blocksize issue. If I check the status of the drive it reports
that the blocksize is 512 bytes.
That is a fixed blocksize (as opposed to variable blocksize).
'man amanda' (2.4.3) says the default
*
tapelist ***
*
20030704 DailySet101 reuse
20306300 DailySet114 reuse
20306300 DailySet113 reuse
20306290 DailySet112 reuse
20306290 DailySet111 reuse
?
[...]
*
tapelist ***
*
20030704 DailySet101 reuse
[...]
20306290 DailySet103 reuse
20306290 DailySet102 reuse
I'm not sure whether this is it, but ... DailySet102
?
[...]
*
tapelist ***
*
20030704 DailySet101 reuse
[...]
20306290 DailySet103 reuse
20306290 DailySet102 reuse
I'm not sure whether
On Fri, Jul 04, 2003 at 10:19:31AM +0100, Angie Yee wrote:
Hello there,
I have a problem with the amanda backup.
Amanda is totally stop working after I amflush all the logfiles in
/usr/am_dump.
?Logfiles? I presume you mean dump files.
Why did you have to amflush them?
Did you get a
21 matches
Mail list logo
