On Tue, Sep 19, 2017 at 18:44:35 +0200, Stefan G. Weichinger wrote:
> Problem:
>
> even after installing mt-st, scsiutils etc and repeated reboots I
> don't get any device files (/dev/nst? /dev/st? /dev/tape* etc)
>
> Even a mknod or modprobe st does not help:
>
> # mknod /dev/st0 c 9 0
>
> #
Hello amanda-users,
When I upgraded to amanda version 3.4.5 I added a storage section in order to
run the amvault and it works. But the daily runs are complaining about not
finding any volumes in that storage sections as they are marked no-reuse. So
what is wrong with my setup ?
when I'm
Hello amanda-users,
I've been testing the the latest version 3.4.5 version and got som issues with
amtapetype. I'm running on Solaris 11 Sparc
# /opt/sbin/amtapetype -f /dev/rmt/2n
Checking for FSF_AFTER_FILEMARK requirement
amtapetype: Error setting FSF_AFTER_FILEMARK: Not allowed to set
Hello, amanda-users,
today I removed a LTO-3-drive from a gentoo linux server, with its
accompanying SAS-Controller-Card, and built it into a shiny new Fuji
TX1330M3 running debian linux 9.1 (with latest updates).
lspci shows
02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID
