We recently upgraded our Amanda server to a new machine, and migrated from Amanda 2.4.0 to 2.4.4p2. However, while our old server used to rewind the tape after the dumps were finished, our backup administrator has discovered that the new machine does not.
We're using the same tape drives, and essentially the same configuration file that we used on the old machine (we just increased the amount of holding space we have). The OS on the backup server has changed, from Solaris 2.6 to Solaris 9. The tape devices are still the same though (/dev/rmt/0n is specified in the amanda.conf file - but I know you're supposed to list the no-rewind device there.) I've looked through the FAQ-O-MATIC, the Amanda chapter from Curtis Prescott's book, and Google searches, and I haven't found anything that addresses this. Is there an option that I'm missing, or some change between 2.4.0 and 2.4.4p2 that would have caused this? Would upgrading to 2.4.4p3 help? (I missed that the newer version was out when it was downloaded.) If nothing else, I suppose I could just tell it to do an 'mt -f /dev/rmt/0 rewind' when Amanda finishes, but that seems like a bit of a kludge. Any help would be appreciated. Thanks! Brian -- Brian Sebby ([EMAIL PROTECTED]) | Distributed Computing Administration Phone: +1 630.252.9935 | Computing and Instrumentation Solutions Fax: +1 630.252.4601 | Argonne National Laboratory