I have changerdev setup and working but I have 2 DLT8000 drives.
What I am wondering is how do I tell amanda about 2 drives?
Right now I have this in the amanda.conf:
tapedev /dev/st/nh0c0t1l0 # the no-rewind tape device to be used
But that is only one of the two. Should this be something
I have 2.4.2 installed with RPM's from RedHat 8.0
I understand that 2.4.3 is available. Does anyone know where I could get 2.4.3
RPM's?
Thanks all.
Mark
I have changerdev setup and working but I have 2 DLT8000 drives.
What I am wondering is how do I tell amanda about 2 drives?
Right now I have this in the amanda.conf:
tapedev /dev/st/nh0c0t1l0 # the no-rewind tape device to be used
But that is only one of the two. Should this be something
I have tried many things, so I am really hoping some people can help me out..
On RedHat 8 Linux
amanda 2.4.2p2-9
mtx-1.2.16-5
Qualstar Library (robot) /dev/sg/h0c0t0l0
2 tape drives: /dev/st/nh0c0t1l0 /dev/st/nh0c0t2l0
When I run this command: sudo -u amanda amcheck DailySet1/ ( run as the
I have amanda 2.4.2 and a Qualstar TLS-6430 30 tape 2 drive ( DLT8000 ) robot
library. I have installed mtx and am able to control the robot well with mtx
commands. eg:
mtx -f /dev/sg/h0c0t0l0 inquiry
Product Type: Medium Changer
Vendor ID: 'QUALSTAR'
Product ID: 'TLS-6430'
Revision: