Re: BNCHMARK DLT1 tape Problem

not w in the path name... -- Martin Hepworth Snr Systems Administrator Solid State Logic Tel: +44 (0)1865 842300 nejat onay erkose wrote: Hello I have a problem with BNCHMARK DLT1 tape . May machine doesnt seem to see the tape properly. The below message is given in the booting time : scsi0

Re: BNCHMARK DLT1 tape Problem

Here are the results of fstab , mtab , and mounts ; # cat /etc/fstab LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom

BNCHMARK DLT1 tape Problem

Hello I have a problem with BNCHMARK DLT1 tape . May machine doesnt seem to see the tape properly. The below message is given in the booting time : scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 Vendor: BNCHMARK Model: DLT1 Rev: 5032 st: Version 20030406,

[Fwd: BNCHMARK DLT1 tape Problem]

---BeginMessage--- Hello I have a problem with BNCHMARK DLT1 tape . May machine doesnt seem to see the tape properly. The below message is given in the booting time : scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 Vendor: BNCHMARK Model: DLT1 Rev: 5032 st:

Re: amrecover / amindexd problem

Hello, I am using the same version as you do but my amandaidx file is different than yours. Maybe it is the reason service amandaidx { socket_type = stream protocol= tcp wait = no user = amanda

problem with amdump

Hello , I have the below message in the log file after the amdump.It says that it fails to estimate. What might be the problem anybody knows? DISK planner amandatux.int-evry.fr /home/noe START planner date 20040506 INFO planner Adding new disk amandatux.int-evry.fr:/home/noe. START driver

Re: problem with amdump

Jaoshua. Joshua Baker-LePain wrote: On Thu, 6 May 2004 at 4:08pm, nejat onay erkose wrote DISK planner amandatux.int-evry.fr /home/noe START planner date 20040506 INFO planner Adding new disk amandatux.int-evry.fr:/home/noe. START driver date 20040506 FAIL planner amandatux.int-evry.fr /home/noe

amrecover

Hello Again, I sent this email before but i couldn't get the answer or I didnt understand what I have read well and therefore still have the same kind of problem To summarize, I have 15 virtual tapes and I just want to extract a few files from one of these tapes (just testing amanda,yet).

amrecover, extracting the files

Hello, I am stuck in a very basic step of recovering with amrecover.I tried to execute amrecover with: (by the way I use file-driver) amrecover -C test -d /var/lib/amanda/bande/t12 (where the data that I want to extract resides in) (if i don't put -d /var/lib/amanda/bande/t12, it takes

Re: amrecover, extracting the files

Hi again, amrecover add Capture.png Added /ReportAmanda/Capture.png amrecover ectract list Invalid command - parse error amrecover extract list Extracting files using tape drive /var/lib/amanda/bande/t12 on host localhost. The following tapes are needed: test12 Restoring files into directory

not in your disklist error

Hello, I am a new user in amanda. I got the below message after trying to execute the command amrecover with config name test : amrecover -C test AMRECOVER Version 2.4.4p1. Contacting server on localhost ... 220 amandatux AMANDA index server (2.4.4p1) ready. 200 Access OK Setting restore date to

Can't determine disk and mount point from $CWD...

Hello Gene, I tried with the FQDN and it works now I have another message like the one below. Since I am trying to to use a FILE-DRIVER to simulate tape behaviour I have 15 pseudo-tapes. However,I didn't define any disk type in amanda.conf; do you think that might be a problem? If it is, what