compiled 3.4.1 on three machines today, works fine on 2 of them, on the
third I have an issue with my vtapes on the external disks.
I run an aggregated changer combining 2 external disks with 20 vtapes each.
define changer disk1 {
tpchanger "chg-disk:/mnt/externaldisk1"
Am 2016-11-13 um 06:44 schrieb Jon LaBadie:
I'm going to be setting up an amanda server with vtapes spread over > 4-6 disk drives. I expect several of the drives will be able to >
hold two or more dumpcycles worth of vtapes. What would you > recommend
for the distribution of the vtapes, each d
Am 2016-08-16 um 21:59 schrieb Stefan G. Weichinger:
Am 2016-08-16 um 18:23 schrieb Jean-Louis Martineau:
Stefan,
Try the attached patch
yep, works!
could someone point me at that patch again, pls? can't find it in my ML
archives here.
(got to patch an existing 3.3.9 installation)
Hello, Chuck,
on 23.06.2005, 12:35 you wrote to amanda-users@amanda.org:
> # Thus use exclusions for all those sockets? This would remove all
> # those nasty ignore-errors and No media found in the Report.
> ./dev
> ./tmp
> ./var
> ./media/cdrom
> ./media/floppy
> I assume the last five entries
Hello, Chuck,
on 23.06.2005, 11:41 you wrote to amanda-users@amanda.org:
> I was getting the following this error - server / lev 0 FAILED [dump to
> tape failed] I assume tar is not working.
> I am using this version of tar.
> server:/etc/postfix # /bin/tar --version
> tar (GNU tar) 1.13.25
O
Hello, Nicklas,
on 23.06.2005, 10:13 you wrote to amanda-users@amanda.org:
> Is there any specific amanda developer list I could report this issue to?
[EMAIL PROTECTED]
But we already know that, thanks ...
I'll see to get that expression committed.
Best regards,
Stefan G. Weichinger.
mailto:
Hello, khalid,
on 22.06.2005, 17:36 you wrote to amanda-users@amanda.org:
> I had the same error a few weeks ago. When you do a make, use the bsd
> version. /usr/ccs/bin/make and it should work fine.
Sounds like this should be added to
http://www.amanda.org/docs/systemnotes.html ?
Best regar
Hello, Oscar,
on 18.06.2005, 00:04 you wrote to amanda-users@amanda.org:
> Any information would be appreciated.
Your posting does not tell me if you use DUMP or GNUTAR.
>From my setup here, which partly dumps a "LVM-partition" I would also
suggest using GNUTAR and listing the mount-dirs insid
Hello, Frank,
on 17.06.2005, 21:25 you wrote to amanda-users@amanda.org:
> Perhaps I'm missing something obvious, but what is the
> fascination with generating tapetypes?
I think that most people that are new to AMANDA assume that they
somehow HAVE TO generate their own special tapetype to tail
Hello, Chuck,
on 17.06.2005, 15:36 you wrote to amanda-users@amanda.org:
> Hi I am still getting - dump larger than tape, 2862305 KB, but cannot
> incremental dump new disk but it's only less than 3gb.
Please stop starting threads over and over for the same simple topic.
Paste your amanda.conf
Hello, Nicklas,
on 16.06.2005, 23:26 you wrote to amanda-users@amanda.org:
> ? Domain=[DOMAIN] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
> Any ideas?
Ignore it (it's not a problem) or browse the archives of this list for
a patch that has been recently posted.
Best regards,
Stefan G.
Hello, Rebecca,
on 16.06.2005, 19:47 you wrote to amanda-users@amanda.org:
> Here's what I have: A server running amanda-2.4.4p4 running on RHE3
> intel, and has been for a couple of years. A client running
> amanda-2.4.4p1 on Sol9, sparc.
> Any suggestions?
Is there any reasonable chance of g
Hello, Rebecca,
on 16.06.2005, 21:22 you wrote to amanda-users@amanda.org:
> Try looking in the amanda FAQ-omatic, here:
> http://amanda.sourceforge.net/cgi-bin/fom?_recurse=1&file=25#file_191
> This is the configuration I used and it works like a champ. ;-)
And something more up-to-date:
htt
Hello, Gavin,
on 08.06.2005, 12:42 you wrote to amanda-users@amanda.org:
GH> Well, you didn't look very hard, did you ;-)
GH> http://www.amanda.org/docs/using.html#config_use_amrecover
I think Giovanni wants to recover a file without even knowing the path
...
If this is the case I would simpl
Hello, Cameron,
on 06.06.2005, 22:42 you wrote to amanda-users@amanda.org:
C> I've been trying to figure out why one of my servers won't back up,
C> when i noticed that no backups were performed yesterday... no errors
C> in any logs, no emails, nothing. is it normal for amanda to "take a
C> day
Hello, Frank,
on 03.06.2005, 17:20 you wrote to amanda-users@amanda.org:
FS> Have you read the chapter about Amanda in "UNIX Backup & Recovery"?
FS> It gives a pretty good overview, and is available on the Internet. The
FS> link is on the amanda.org web page.
It is also part of the AMANDA-docs
Hello, Dominique,
on 01.06.2005, 19:24 you wrote to amanda-users@amanda.org:
DA> If I understand, only the parameter lenght and filemark is important. So,
DA> my tape drive is compatible with amanda.
Let me repeat this for the records_that_noone_browses:
If your OS supports your tape drive, y
Hello, Dominique,
on 01.06.2005, 15:18 you wrote to amanda-users@amanda.org:
DA> I found the config for a IBM LTO tape driver:
DA> define tapetype IBM-LTO3580 {
DA> comment "IBM LTO Ultrium 3580 (Hardware Compression off)"
DA> length 100608 mbytes
DA> filemark 0 kbytes
DA> spee
Hello, Ralf,
on 31.05.2005, 12:32 you wrote to amanda-users@amanda.org:
rled> thanks for your help. I've found it.
rled> It seems that the backup is doing okay and it's only a issue in displaying
rled> some things.
rled> Now I know that the backup is doing fine and I' not so nervous annymore.
C
Hello, Alex,
on 30.05.2005, 11:45 you wrote to amanda-users@amanda.org:
AJ> I got all of your mails, most of them in a few identical copies, as of
AJ> this week-end (29 may).
My mails weren't delivered by majordomo, because I simply had
forgotten to subscribe the address [EMAIL PROTECTED] as we
Hello, Gene,
on 29.05.2005, 04:14 you wrote to amanda-users@amanda.org:
GH> On Saturday 28 May 2005 21:35, Gene Heskett wrote:
>>No mail from the list in about 20 hours, so lets see what happens to
>>this message...
GH> Humm, round trip, 10 minutes max. I must be the only idiot near a
GH> comp
Hello, amanda-users,
just a short call for opinions:
Who uses gpg-amanda, as described at
http://security.uchicago.edu/tools/gpg-amanda/ ?
I am thinking about including this in the docs and would like to hear
your thoughts.
Best regards,
Stefan G. Weichinger.
mailto://[EMAIL PROTECTED]
Hello, amanda-users and amanda-hackers,
I am happy to inform you that I have just published the current
AMANDA-docs on www.amanda.org. (pdf and html updated, the ps-output
seems currently broken :-( ).
Main changes:
- Split of the amanda.8-manpage: New manpage amanda.conf.5
Updates and corre
Hello, Filip,
on 19.05.2005, 19:05 you wrote to amanda-users@amanda.org:
FR> At 05/18/05 19:35, Bryan K. Walton wrote:
FR> (...)
FR> Same here, with Amanda 2.4.5 / Samba 3.0.13, running slackware-current with
FR> 2.4.30 kernel.
In client-src/sendbackup-gnutar.c there are regular expressions
Hello, Filip,
on 20.05.2005, 21:23 you wrote to amanda-users@amanda.org:
>> FR> I realize it may sound a bit messy, but actually it is "the Way":)
>> FR> If it's not clear - never mind - I'll publish a howto somewhere, with
>> full
>> FR> explanation, to straighten things up:)
>>
>> Please sha
Hello, Vlad,
on 23.05.2005, 12:05 you wrote to amanda-users@amanda.org:
VP> 1)So IS there a parameter to slow down the data stream to a constant
VP> level (in amanda.conf) while flushing or not ?
There is the parameter "speed" but it is not currently used by AMANDA.
VP> 2) I have the 8 shar
Hello, Geert,
on 20.05.2005, 21:30 you wrote to amanda-users@amanda.org:
GU> On Fri, 20 May 2005, [ISO-8859-2] Filip Rembia³kowski wrote:
>> At 05/18/05 23:20, Stefan G. Weichinger wrote:
>> > FR> Standard daemontools setup does not assume setting up UDP services. So
>> > it lacks
>> > FR> an ud
Hello, amanda-users and amanda-hackers,
I resend this one using my old address, as I have noticed that over
the last few days my messages to these lists don't appear anymore.
Maybe this has to do with using my [EMAIL PROTECTED] adress, so let's see
if this one works out again.
:::
I am happy
Hello, Chuck,
on 23.05.2005, 14:22 you wrote to amanda-users@amanda.org:
CASA> Hi Again
CASA> I have managed to get readlines libraries seen by my ./configure.
CASA> Thus can someone post the chown details for planner,dumper and amcheck.
http://www.amanda.org/docs/install.html
Best regards,
Hello, amanda-users,
as some of you may have noticed, no messages posted by me get through
to this list since May, 18th ...
Maybe this one.
Best regards,
Stefan G. Weichinger.
mailto://[EMAIL PROTECTED]
Hello, amanda-users,
as some of you may have noticed, no messages posted by me get through
to this list since May, 18th ...
Maybe this one.
Best regards,
Stefan G. Weichinger.
mailto://[EMAIL PROTECTED]
31 matches
Mail list logo
