Jean-Louis took a look at my config, and it turns out I had a foolish error. I
had used the following lines from the default config:
# flush-threshold-dumped, flush-threshold-scheduled, taperflush, and autoflush
# are used to control tape utilization. See the amanda.conf #40;5#41; manpage
Can you send
your whole amflush log, as well as the taper debug log?
Sure. Here is amflush.1, taper.20080609100127.debug follows:
amdump#58; start at Mon Jun 9 10#58;01#58;26 MDT 2008
amdump#58; datestamp 20080609
amdump#58; starttime 20080609100126
amdump#58;
What's is the runtapes setting?
It's hard to read files when many characters are converted to HTML, it's
a lot better if you attach a file, they will not be converted.
Jean-Louis
nbarss wrote:
Can you send
your whole amflush log, as well as the taper debug log?
Sure. Here is
A couple of people have asked me if I have solved this, and I have not.
The error seems to be a problem with the taper not being able to write to my
tape drive. It sends a REQUEST_NEW_TAPE to the driver, who replies NO_NEW_TAPE.
I am unable to figure out what the problem is. What problem is
On Fri, Jun 6, 2008 at 8:36 PM, nbarss [EMAIL PROTECTED] wrote:
taper: Total dump size should be 130801kb, part size is 21474836480kb
..
It could just be an extra 'kb' tacked on the end, or a serious calculation
error.
It is just a typo, but should definitely be fixed. Amanda has a bad
habit
