Hull, Dave wrote:
The server in question is running iptables and the rulesets are
configured to allow NEW connections from any host on a given subnet,
call it subnet A, to udp port 10080 and tcp ports 10082 and 10083.
The server and the Linux clients are all running amanda from an RPM
installation,
On Tuesday 15 February 2005 12:45, Hull, Dave wrote:
>-Original Message-
>From: [EMAIL PROTECTED] on behalf of Gene Heskett
>
>I'm not a sol expert, thats others territory, but I suspect that if
>there is a firewall (iptables or a lookalike) involved, you will
> have to cut a hole in it to
-Original Message-
From: [EMAIL PROTECTED] on behalf of Gene Heskett
I'm not a sol expert, thats others territory, but I suspect that if
there is a firewall (iptables or a lookalike) involved, you will have
to cut a hole in it to allow amanda to talk to her clients and vice
versa. I
On Monday 14 February 2005 17:19, Hull, Dave wrote:
>I have successfully installed and configured Amanda on RHEL servers
> and clients. I'm trying to install the client bits on a Solaris 8
> system. I've downloaded source and run configure with the correct
> options, but I'm getting the following e
I have successfully installed and configured Amanda on RHEL servers and
clients. I'm trying to install the client bits on a Solaris 8 system. I've
downloaded source and run configure with the correct options, but I'm getting
the following error during configure:
configure: WARNING: netinet/ip.h
Hi, Paul,
on Dienstag, 08. Februar 2005 at 19:47 you wrote to amanda-users:
PB> Parameter "etimeout" in amanda.conf?
PB> To see how large to set it to, have a look on the client maxwell in
PB> the debug files /tmp/amanda/sendsize.DATATIME.debug
PB> and see how long the estimate did take.
This on
Wim Zwitser wrote:
FAILURE AND STRANGE DUMP SUMMARY:
maxwell/data/backup/Sat lev 0 FAILED [Estimate timeout from maxwell]
What can this be?
Parameter "etimeout" in amanda.conf?
To see how large to set it to, have a look on the client maxwell in
the debug files /tmp/amanda/sendsize.DATATIME.deb
On Tuesday 08 February 2005 10:44, Wim Zwitser wrote:
>Hi all,
>
>amcheck detects no problem on the server and on client maxwell.
>But amdump stops after a timeout:
>
>FAILURE AND STRANGE DUMP SUMMARY:
> maxwell/data/backup/Sat lev 0 FAILED [Estimate timeout from
> maxwell]
>
>What can this be
Thomas Buntrock wrote:
got result for host file disk /home/cvs: 0 -> 828890K, 1 -> 2840K, -1 -> -1K
error result for host www disk /etc: Request to www timed out.
Have a look on that host in the files named
/tmp/amanda/sendsize.DATETIME.debug
to see if there are any obvious errors.
Notice how lon
