Hi All,
i have a strange error about Amanda.
I found no solution to this bug.
Amcheck make his job :
amcheck axis
Amanda Tape Server Host Check
-
Holding disk /media/contessa/backup/backup-giornalieri: 833545744 KB
disk space available, using 41943040 KB as request
All,
We have been experimenting with pigz (a parallel version of gzip which
exploits multiple cores) to try and reduce the amount of time taken
when backing up DLEs using software compression (gzip). We've had
encouraging results, with the backup taking roughly half the time.
Unfortunately, the p
A quick update. After generating about 15G of debug logs
(chatty! :-) ), the issue hasn't yet recurred. I'm going to continue
to beat on it to see if I can cause it to occur again. When and if
that happens I'll assemble debug logs covering the crash. Hopefully,
whatever was happening is now
an amanda tape
rewinding, writing label spantest-10, checking label, done.
regards,
jf
* Jean-Louis Martineau <[EMAIL PROTECTED]> [20070524 09:26]:
Hello,
It's time for everyone to test the latest 2.5.2 snapshot before we
release 2.5.2p1.
Some bugs were found in amanda-2.5
[15] > amadmin daily version
build: VERSION="Amanda-2.5.2-20070523"
BUILT_DATE="Thu May 24 10:07:47 EDT 2007"
BUILT_MACH="SunOS zorn.math.purdue.edu 5.10 Generic_118833-03
sun4u
09:26]:
> Hello,
>
> It's time for everyone to test the latest 2.5.2 snapshot before we
> release 2.5.2p1.
>
> Some bugs were found in amanda-2.5.2, most of them because of the new
> IPv6 code and incompatibility with some platform:
>
>* Many IPv6 bugs
>
Hi Jean-Louis,
I'm giving that a try right now.
Well, I tried it last night but awoke this morning to discover that
I'd filling the /tmp partition and all h*ll was breaking loose with
MailScanner! I hadn't realized just how verbose those debug logs
would be (/tmp is only 1 gig).
I'm goin
00 ( 0.00%)
dumper0 busy : 7:05:09 ( 87.98%)
dumper1 busy : 6:16:22 ( 77.88%)
dumper2 busy : 6:47:01 ( 84.22%)
My chunkers shows zero, but I have chunkers running.
My build is
zorn->[15] > amadmin daily version
build: VERSION="Amanda-2.5.2-20070523&qu
Can you try latest 2.5.2 snapshot from
http://www.zmanda.com/community-builds.php?
Do: AMANDA_CFLAGS="-g"
before you configure
Add the following lines to amanda.conf:
debug_auth 1
debug_protocol 1
debug_dumper 1
Send me the Backtrace and the dumper.*.debug if it still crash.
Jean-Louis
Bruc
Hi all,
I've been having troubles with Amanda on my new box (an eMachines
desktop running Fedora Core 6).
I have four machines being backed up to vdisks with about 500Gb total
being backed up with two clients active at the time of the crash. All
three are running builds of 2.5.2.
I keep
;There were a few errors on Solaris builds in the 2.5.2 release. Could
> >>you try the latest snapshot from
> >>
> >> http://www.zmanda.com/community-builds.php
> >>
> >>And see if that works better?
> >>
> >>Dustin
> >>
> >>--
> >
rks better?
Dustin
--
Dustin J. Mitchell
Storage Software Engineer, Zmanda, Inc.
http://www.zmanda.com/
I compiled amanda-2.5.2-20070523 on our Solaris 10 SPARC amanda server. No
problems with the compile and install.
I did a test backup to several OS clients which a
l
> Subject: Re: report status of amanda-2.5.2-20070523 which fixed chuncker
> port problem
>
>
> Can you try different ordering in perl argument on the first line?
>
> Try: #!/opt/csw/bin/perl -t -T -w -W
[McGraw, Robert P.]
worked
> Try: #!/opt/csw/bin/perl -T -t
McGraw, Robert P. wrote:
zorn->[41] > ./amstatus --config daily
"-t" is on the #! line, it must also be used on the command line at
./amstatus line 1.
If I removed the -t -T from the #! line amstatus worked ok.
What your perl version? `perl --version`
Jean-Louis
w.zmanda.com/community-builds.php
>
> And see if that works better?
>
> Dustin
>
> --
> Dustin J. Mitchell
> Storage Software Engineer, Zmanda, Inc.
> http://www.zmanda.com/
I compiled amanda-2.5.2-20070523 on our Solaris 10 SPARC amanda server.
* Jean-Louis Martineau <[EMAIL PROTECTED]> [20070508 08:11]:
> Hello,
>
> I committed all patch.
> Can you test today's snapshot and verify that it compile and run.
> I want to be sure all patches are committed correctly.
>
> snapshot can be found at http://www.zmanda.com/community-builds.php
>
-8776
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-amanda-
> [EMAIL PROTECTED] On Behalf Of Paddy Sreenivasan
> Sent: Thursday, May 03, 2007 8:56 PM
> To: amanda-announce; amanda-users; Amanda Hackers
> Subject: Re: Amanda 2.5.2 release
>
> Thanks to e
sed to announce the release of Amanda 2.5.2.
It can be dowloaded from http://www.amanda.org or
https://sourceforge.net/project/showfiles.php?group_id=120
Here's a list of the changes for release 2.5.2 (from the NEWS file):
Look at the ReleaseNotes and ChangeLog file for more details.
Many
18 matches
Mail list logo