Greetings:
My system is ALL 3.3.0 (brand new) and has been working for the past few weeks.
I keep adding additional clients, etc, but am now pretty well ready to go live.
Yesterday, I ran another test backup, but received errors indicating the tape
drive wasn't ready (strange enough), but
Neil,
I'd had a variety of tape errors, one of the linux boxes will
occasionally drop the driver for the robot on the floor. My
most recent problem was timeouts to the LTO5 in my G2 juke
attached to a Solaris x86 box.
The answers very and you have to run the checklist, the linux box,
you unload
neil,
Can you post the changer state file.
Run the following command and post the result:
amtape CONFIG inventory
amtape CONFIG update
Try a new amflush or amdump.
Jean-Louis
On 01/19/2012 11:24 AM, Neil Carter wrote:
Greetings:
My system is ALL 3.3.0 (brand new) and has been working for
Greetings:
Attached are the changer.conf file, the results of the two commands you
requested, and the eMailed result from another attempted amflush.
Thanks!
Neil
On 2012.01.19 10:51 AM, Jean-Louis Martineau wrote:
neil,
Can you post the changer state file.
Run the following command and
Greetings:
GOT IT!!
I found the following in the taper.20120119111247.debug file:
Thu Jan 19 11:12:48 2012: taper: SL24: polling 'tape:/dev/nst0' to see if it's
ready
*_Thu Jan 19 11:12:50 2012: taper: Empty amanda header: buflen=32768 lsize=32768
buf=''
Thu Jan 19 11:12:50 2012: taper:
