Hello,
I'm having some problems with amtape and a L280 changer.
Specifically, I'm unable to use amtape for anything other than showing the
current slot,
and ejecting the current slot.
(amanda)@atbackup:/tmp/amanda$ amtape atlab current
amtape: scanning current slot in tape-changer rack:
slot 3: d
On Wed, 10 Mar 2004 at 12:16pm, Benjamin Hyatt wrote
> (amanda)@atbackup:/tmp/amanda$ amtape atlab slot 4
> amtape: could not load slot /usr/local/libexec/chg-zd-mtx:: loadslot: not
> found
>
> My setup consists of the following:
> Sun E450 (solaris 9 + current patch set)
> Storedge L280
> mtx ve
Hello Josh,
> Did you go through the tests in the chg-zd-mtx script? Those should
> confirm that your CHANGER.conf file is good.
(amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -info
3 7 1
(amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -reset
/usr/local/libexec/chg-zd-mtx:
Brian,
Changing chg-zd-mtx to use ksh seems to have
fixed the problem. Thanks for the quick answer!
>Check the debug file for the glue script, should be in /tmp/amanda/
>Also, someone at one point suggested that I use ksh rather than sh
>for the chg-zd-mtx script, don't know if that is still a
Josh,
I had the same problem the other day - turns out my initial
testing was from root rather than amanda user account and
I didn't have access (write access) to all of the files in the
amanda config directory.
> Hello Josh,
>
> > Did you go through the tests in the chg-zd-mtx script? Those s