Thanks!!
I believe the errno from the write was EPIPE.
David
From: Jean-Louis Martineau <[EMAIL PROTECTED]>
To: David Trusty <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: dumpers exiting with signal 11 in version 2.4.3?
Date: Fri, 10 Jan 2003 08:39:15
Hello David,
Thanks for your analysis of the problem.
Do you know why the write failed?
The attached patch should fix the infinite loop, could you try it and
let me know if it works.
Jean-Louis
On Thu, Jan 09, 2003 at 11:58:33PM +, David Trusty wrote:
> I think I may have found the cause of
833 and see if you concur?
Thanks!!
David
From: "John R. Jackson" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: "David Trusty" <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: dumpers exiting with signal 11 in version 2.4.3? Date: Fri, 03
My runtapes is 4.
I also think it may happen every time the tape is changed.
I still can't seem to get a core dump for analysis. I used
the 'limit' command in the shell where I did the amdump,
but it did not seem to take effect. I will try a few variants
to see if I can get a core dump to be sa
Hello,
* David Trusty ([EMAIL PROTECTED]) [20030105 13:25] thus spake:
> I have more information on this problem.
>
> I see these messages in the 'amdump' file:
>dumper: logfile.c@202: memory allocation failed (28 bytes requested)
>dumper: debug.c@345: memory allocation failed (22 bytes r
TECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: dumpers exiting with signal 11 in version 2.4.3? Date: Fri, 03
Jan 2003 18:22:19 -0500
>I received these messages at the end of a backup:
>
> driver: dumper3 exited with signal 11
Oops. :-)
>I am running version 2.4.3.
What OS?
>I
>I received these messages at the end of a backup:
>
> driver: dumper3 exited with signal 11
Oops. :-)
>I am running version 2.4.3.
What OS?
>I believe most files were written to tape, but these messages look unusual.
>I did not find core files, but they may be somewhere I haven't yet
>disco
Hi,
I received these messages at the end of a backup:
driver: dumper3 exited with signal 11
driver: dumper2 exited with signal 11
driver: dumper1 exited with signal 11
driver: dumper0 exited with signal 11
I am running version 2.4.3.
I believe most files were written to tape, but these mess
