From: Zhan Liu <zhan....@amd.com>
[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.
[How]
Keep eDP Vdd on when eDP stream is already enabled.
Reviewed-by: Charlene Liu <charlene....@amd.com>
Acked-by: Jasdeep Dhillon <jdhil...@amd.com>
Signed-off-by: Zhan Liu <zhan....@amd.com>
---
.../display/dc/dce110/dce110_hw_sequencer.c | 24 +++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 52b22a944f94..ace04e2ed34e 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1770,9 +1770,29 @@ void dce110_enable_accelerated_mode(struct dc *dc,
struct dc_state *context)
break;
}
}
- // We are trying to enable eDP, don't power down VDD
- if (can_apply_edp_fast_boot)
+
+ /*
+ * TO-DO: So far the code logic below only addresses single eDP
case.
+ * For dual eDP case, there are a few things that need to be
+ * implemented first:
+ *
+ * 1. Change the fastboot logic above, so eDP link[0 or 1]'s
+ * stream[0 or 1] will all be checked.
+ *
+ * 2. Change keep_edp_vdd_on to an array, and maintain
keep_edp_vdd_on
+ * for each eDP.
+ *
+ * Once above 2 things are completed, we can then change the
logic below
+ * correspondingly, so dual eDP case will be fully covered.
+ */
+
+ // We are trying to enable eDP, don't power down VDD if eDP
stream is existing
+ if ((edp_stream_num == 1 && edp_streams[0] != NULL) ||
can_apply_edp_fast_boot) {
keep_edp_vdd_on = true;
+ DC_LOG_EVENT_LINK_TRAINING("Keep eDP Vdd on\n");
+ } else {
+ DC_LOG_EVENT_LINK_TRAINING("No eDP stream enabled, turn
eDP Vdd off\n");
+ }
}
// Check seamless boot support
--
2.25.1
