I am not aware of any Free data but looked at using
http://www.eoddata.com/ some time ago and have not reviewed their
services lately.
--- In amibroker@yahoogroups.com, "cstrader" <[EMAIL PROTECTED]> wrote:
>
> opentick?
>
> - Original Message -
> From: "tipequity" <[EMAIL PROTECTED]>
>
> It is very important to know that AB does not detect the OI field
>for
> changes, so if there is no other changes in your database, pressing
>save
> doesnt save your changes in OI (at least that was the case in the
>past), To
> force save, choose save database as, or make some sure there are
FWIW
TradeStation does have Simulated Trading in their latest release.
Been using it off and on for a while now and am satisfied with it's
functionality.
Snip --
> I have spent several weeks trying to find a combination that suits
> me. 1)MY AMI 2)reliable data fe
(Subjective) investigations into the 'human condition' have been
going on, in parallel with our search for objective truths, as long
as humanity has been around.
This body of information has been collected and preserved, by the
few, for the benefit of mankind (the many) and consitutes a SCIENCE
Dan,
Thank you for the detailed reply.
I have done a lot of simulating of futures strategies in AB over the
last year. I have also traded the more traditional day trading way --
just time charts with a couple of indicators and a lot of S/R and
trend line drawing. If I do manual trading, I
Hi,
One of the goals of walk forward optimization is to remove the
discretionary decisions (i.e. the Params) and see how your system
would perform on out of sample (OOS) data after having been optimized
over in sample (IS) data.
At each OOS phase, the sytem uses only one set of values; the opt
Clever, Brian.
Thanks for the COM urls.
Bob
- Original Message -
From: "brian_z111" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 21, 2008 6:17 AM
Subject: [amibroker] Re: Import Data into OI field?
> Here is a way to do that.
>
> A method to import extra data into AmiBrokers Open Inter
Worked flawlessly, Paul.
I'll be able to store the stock's weekly composite grade [A,B,C or F] in its
OI field.
[Or that grade plus its10 sub-grades assuming I figure out how to decipher it.]
Many thanks,
Bob
- Original Message -
From: Paul Ho
To: amibroker@yahoogroups.com
Se
Hi Guys,
Can someone please give me a hand with converting a metastock formula
using PREVIOUS to Metastock. I believe I am supposed to be using a
FOR loop to do it but am not sure where to start. I have been pointed
to http://www.amibroker.com/guide/afl/afl_view.php?ama
and have also found a m
--- In amibroker@yahoogroups.com, Dennis Brown <[EMAIL PROTECTED]> wrote:
>
> Dan,
>
> I visited their website yesterday. It was not clear to me what I
> would be getting if they were to provide this plug-in. Also they
did
> not publish their commissions like most others do.
***
1, You need the "Date Time Function" plug in.
2. You are correct. You have to change OR5, OR15, OR30, and OR60 variables.
2 re "if(Interval() < 84600) {show_ACD = ParamToggle("ACD Bands
On/Off","Off|On");"
doesn't need changing.
On 3/20/08, spaceant888 <[EMAIL PROTECTED]> wrote:
>
> Hi,
Thanks, looking for readme in the AmiQuore folder I see you also included
forex.html, which tells me exactly what I needed to know.
Rik Rasmussen
On Fri, Mar 21, 2008 at 7:27 PM, Tomasz Janeczko <[EMAIL PROTECTED]>
wrote:
> Please read AmiQuote readme, it lists available forex symbols.
>
> Best
Hi Alex, one simple way to do this is to put all of "your" stocks in
a watchlist and then run an exploration using that watchlist as a filter.
--- In amibroker@yahoogroups.com, "dralexchambers"
<[EMAIL PROTECTED]> wrote:
>
> Hi - how would I use the exploration AFL to scan all my stocks for
> cl
Sure. Subroutine is just a function that does not return anything
http://www.amibroker.com/guide/keyword/function.html
http://www.amibroker.com/guide/keyword/procedure.html
Best regards,
Tomasz Janeczko
amibroker.com
- Original Message -
From: KBH
To: amibroker@yahoogroups.com
S
Hello,
Please always provide original reference:
http://www.amibroker.com/kb/2007/10/11/low-level-gfx-example-yearlymonthly-profit-chart/
I discourage posting copies of codes here when they are available on Knowledge
Base or UKB.
Best regards,
Tomasz Janeczko
amibroker.com
- Original Messag
Sure
http://www.amibroker.com/kb/2007/10/11/low-level-gfx-example-yearlymonthly-profit-chart/
Best regards,
Tomasz Janeczko
amibroker.com
- Original Message -
From: "retards.rm" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 21, 2008 6:56 AM
Subject: [amibroker] Are there more Backtesting
Please read AmiQuote readme, it lists available forex symbols.
Best regards,
Tomasz Janeczko
amibroker.com
- Original Message -
From: "Henrik B. W. Rasmussen" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 21, 2008 6:11 PM
Subject: [amibroker] Forex symbols
> Some symbols download and im
Here is the AFL code that adds more Backtester Chart Pane Reports. Watch out
for word wrap, as usual, with the under mentioned code. I attach the AFL for
those who receive direct emails. Remember to use the Parameters pop-up
window to select the various Reports. Enjoy - courtesy of Tomasz.
Cheers,
I've been looking everywhere on the site for a monthly report from the
backtester - I know I saw it somewhere. Can someone point me to the code?
Thanks!
I maintain the view that algorithms exist in nature, and that people who
develop algorighms are only discovering another one of nature's secrets.
When my son first showed me Amibroker several years ago, I looked at charts
with Stochastics, and RSI, and I became convinced that mother nature has
These are not custom (advanced) backtest codes, just the options for
backtesting, and do not belong in the advanced file. They will not be read
until after the backtest has been completed and is ready for changing in the
cbt.
If you want these standard for all backtesting, then just use #Include
fu
Hi all,
Amibroker's an awesome program but I'm wondering if any of you know if
its possible to do stuff like perform a backtest and view the monthly
revenues for the periods backtested or any other additional chart or
graph displays available upon backtesting.
All I see are just the MFE MAE gr
Hi,
I'm wondering if anyone here can convert my indicators which have been
originally used on Metatrader (MQ4) to Amibroker (AFL).
I am willing to pay.
Please email me at [EMAIL PROTECTED]
Thanks,
Paul
Enclose the groups of conditions that work together in brackets
--
Cheers
Graham Kav
AFL Writing Service
http://www.aflwriting.com
On 22/03/2008, tummalaajaybabu <[EMAIL PROTECTED]> wrote:
> Hi
>
> Kindly help any body this exploration. I'm getting trend detetion with
> all 3 frames correctly
Hi - how would I use the exploration AFL to scan all my stocks for
close crossing an EMA according to a settings file.
An example:
SettingsFile.txt:
[stock symbol],[ema length]
AAPL,10
GOOG,15
I then run the exploration AFL:
if (symbolname matches symbol in settingsfile)
if (Cross(Close,[[[
opentick?
- Original Message -
From: "tipequity" <[EMAIL PROTECTED]>
To:
Sent: Thursday, November 29, 2007 8:35 PM
Subject: [amibroker] Re: Free EOD futures contracts downloads?
>I am interested in the same. Did you find a source?
>
> Thanks
> --- In amibroker@yahoogroups.com, "cstrad
Joe,
I understand what you are saying about the difference between layers
and plot order, and yes, I have to split up my modular AFL code into
the part that needs to be executed first for values and some plot
commands at the end of all the AFL that are executed to get the plot
order correc
split management is datasource dependent. DTN IQ does not fix the
split data. so ab shows a gap in data.
--- In amibroker@yahoogroups.com, "brian_z111" <[EMAIL PROTECTED]> wrote:
>
> Re: Stock splits in AB
>
>
> I'll try to help although I have never had to, or wanted to, use
> built-in splits
Louis please go to the 'Automatic Analysis' Tool and open the Settings. Modify
all values according to want you want to see. Then SAVE everything in an ABS
file that you can open in the beginning of your AFL. That's all ...
Regards, Ton.
- Original Message -
From: Louis Préfontaine
Hi
Kindly help any body this exploration. I'm getting trend detetion with
all 3 frames correctly but buy sell signals generated not coming
properly. For example : Actually my intention is when the primary and
intermediate trend is down and short term trend is up the signal is
sell . But in the exp
Some symbols download and import, other give me "The parameter is
incorrect" in Amiquote.
Suymbols not working: USDCAD, AUDUSD, GBPJPY
Symbols working: EURUSD, GBPUSD, .
Ideas?
Rik Rasmussen
I was wondering, most of my limited coding exp. is with Visual Basic. Can I
create sub routines in AFL?
If I can do that then I could create my price lines very easily.
Maybe that won’t work either.
Awhile back Graham posted something on writing text back and forth In AFL
maybe that’s the
You need to know where the peaks are located. Either the actual bar number
or how many bars ago relative to last bar.
Using elative values assume:
Peak1 = 10; // 10 bars before last bars
Peak2 = 35;
Lowestvalue = Ref(LLV(Low,(Peak2 - Peak1),-Peak1); // Lowest
vlaue between peaks
I am trying to use Hermans
HYPERLINK
"http://www.amibroker.org/userkb/2008/03/16/setting-prices-with-your-cursor/
"http://www.amibroker.org/userkb/2008/03/16/setting-prices-with-your-cursor/
to create multiple price lines. I want an entry price line, a stop price
line, and a target price l
Hi TJ and others,
I am not able to find code to get the following values:
1) Lowest price between two peaks (Peak1 & Peak2)
2) CCI value corresponding to the lowest price above(lowest price
between two peaks)
Any help with codes for the above is highly appreciated.
With thanks and kind reg
You are doing two mistakes:
First: you are using price instead of date/time as x co-ordinate.
Second: you are using array instead of number (scalar)
C is an ARRAY, you need single VALUE.
See user's guide for working sample code:
http://www.amibroker.com/f?plottext
Best regards,
Tomasz Janeczk
If it is in Jim's DB then you can get it out, in any category, and
get it back,in any category (via Watchlists).
categoryAddSymbol uses one of the following:
categoryMarket
categoryGroup
categorySector
categoryIndustry
categoryWatchlist
categoryFavorite
categoryIndex
You have come a lon
We can do that in AB.
I ran out of time to do anymore.
As you play with it you will find ways to improve it and get what you
want e.g. try changing SD and MA periods.
Also, if you want to beautify it with scales and headings etc you can
also do that.
Plotting it on the same chart is nice for p
That's damn close - they seem to do some sort of normalization of the
numbers. Their numbers are range bound with 1.0 being the mean, and
then standard deviations being .02 on either side - probably
percentages is my guess.
http://www.indexindicators.com/charts/sp500-vs-sp500-20d-rsma-params-x-x-
Hi Brian,
The problem is that when I want to import back to AB, all I can change is
the group, and I can only modify this group by group. I don't see how I can
import everything back in the right industry, as setted by Jim.
Louis
2008/3/18, brian_z111 <[EMAIL PROTECTED]>:
>
> Try this:
>
> a)
Hi,
Ok let me try to explain again.
I have a file with
run = Optimize ("run", 1,1,1000,1);
SetOption("UseCustomBacktestProc", True );
SetCustomBacktestProc( "C:\\Program
Files\\Amibroker1\\Formulas\\Custom\\custom_backtest.afl" );
SetOption("MaxOpenPositions", 5 );
SetOption("InitialEquity", 1
Sure, you just need to click standard Windows "restore" button or use
Windows->Tile menus
http://www.amibroker.com/video/TwoSymbols.html
Also note that recent beta versions have "floating" windows capability:
http://www.amibroker.com/video/FloatAndLink.html
There are lots of other videos here:
h
Here is a way to do that.
A method to import extra data into AmiBrokers Open Interest field
using AmiQuote with Yahoo data downloads.
(this is a basic method that can be developed for wider use).
a) Open AB and create a new, blank, database.
b) Open AmiQuote and add a ticker e.g. PRXL
Note: P
You need 2 co-ordinates.Also, close is a Reserved word, use Example for example
:)
Cheers
Prashanth
- Original Message -
From: KBH
To: amibroker@yahoogroups.com
Sent: Friday, March 21, 2008 2:37 PM
Subject: [amibroker] plotText
I Have been trying to plot text and keep ge
I Have been trying to plot text and keep getting errors.
PlotText( ''text'', x, y, color, bkcolor = colorDefault )
What am I doing wrong.
PlotText(“Close”, C, 680.00, colorBlack, colorWhite)
All I am trying to do is plot text on chart, somewhere, anywhere so I can
then mess with the
Hello Tomasz,
Thanks for your prompt reply =)
Actually I was not referring to the chart tab, but the "GM (Daily)"
tab in this video you posted:
http://www.amibroker.com/video/DockingWindows.html
I track multiple symbols at the same time and I want to have the stock
charts in separate windows (n
47 matches
Mail list logo