Re: [AMRadio] Cleaning shack

Do you accept PayPal? Regards, Gary...WZ1M - Original Message - From: John Lyles [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Sunday, January 22, 2006 6:01 PM Subject: [AMRadio] Cleaning shack $20 for all, postpaid GE Ham News: July/Aug 1951 v6,n4, Signal Slicer SSB adapter

Re: [AMRadio] Apache TX-1 Drive pot

I just happen to have one of these controls. It came out of a TX-1. $4.00 plus shipping. Regards, Gary...WZ1M - Original Message - From: W5OMR/Geoff [EMAIL PROTECTED] To: Discussion of AM Radio amradio@mailman.qth.net Sent: Tuesday, December 06, 2005 12:08 PM Subject: Re: [AMRadio] Apache

Re: [AMRadio] Drying out HV transformers / Chokes

Regular floor varnish works just fine. You have to thin it with Zylene. The motor repair shop is a baking varnish. I use nomex paper when insulating rewinds. Its expensive but very very reliable. The tar is nothing more than the stuff roofers use on flat roofs. Its applied hot and cools down to a

Re: [AMRadio] Drying out HV transformers / Chokes

Speaking of HV trannys for the BC-610. I have one with a shorted secondary. My plans are to rewind this hunk of iron and turn the primary into a dual voltage, 115/230. This tranny is from the E model. Would I have anyone out there that mite be interested? Also, the transformer has those big

Re: [AMRadio] Drying out HV transformers / Chokes

transformers / Chokes GBrown wrote: Speaking of HV trannys for the BC-610. I have one with a shorted secondary. My plans are to rewind this hunk of iron and turn the primary into a dual voltage, 115/230. This tranny is from the E model. Would I have anyone out there that mite be interested? Also

Re: [AMRadio] part needed

Ronnie: What's the voltage a mils rating your looking for? I mite have one on the shelf. Regards, Gary...WZ1M - Original Message - From: ronnie.hull [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Sunday, September 11, 2005 9:47 AM Subject: [AMRadio] part needed anyone out

Re: [AMRadio] A bit of Viking Valiant help

Just a wild a-- guess, but I thought that the Valiant used only 6146's, not the B 6146. It is my understanding that sometimes subbing in the 'B for the early 6146 just doesn't cut the mustard. Regards, Gary...WZ1M - Original Message - From: John Lawson [EMAIL PROTECTED] To:

Re: [AMRadio] Need Ceramic Disk Caps

Hi Ron: www.justradios.com has them in mica 1600 volts, 4000 pf. There about $3.50/each. Regards, Gary...WZ1M - Original Message - From: [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Wednesday, August 10, 2005 4:08 AM Subject: [AMRadio] Need Ceramic Disk Caps I am in need of 4ea.

Re: [AMRadio] Viking 2 Switch

Ron:: While I look for the knob, I believe I also have the meter switch. Regards, Gary...WZ1M - Original Message - From: [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Saturday, March 19, 2005 10:14 PM Subject: [AMRadio] Viking 2 Switch I am putting another Viking2 on the air

Re: [AMRadio] Meter Switch Part #

Ron: I think I have an original switch for the Viking II. Email me direct. Regards, Gary...WZ1M - Original Message - From: [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Tuesday, February 15, 2005 1:31 PM Subject: [AMRadio] Meter Switch Part # Does anyone know the Centralab

[AMRadio] FS: 100TH Eimacs.

I have two, 100TH eimacs. I believe these to be NOS tubes. I dont have the complete boxes but the tubes are still wraped in there protective cover. Not expecting to make a million bucks on these. No reasonable offer refused. Take care, Gary

Re: [AMRadio] tubes needed

Hi Ronnie: Gary, WZ1M here. I mite have the tubes. Ill check and get back at ya. Regards, Gary - Original Message - From: w5sum [EMAIL PROTECTED] To: amradio@mailman.qth.net Sent: Thursday, December 18, 2003 9:48 AM Subject: [AMRadio] tubes needed howdy y'all I am in need of a