Brian,
I noticed in the manual K5 is listed as a 600 volt Time Delay Relay if that
helps. My old eyes aren't that good either and I have yet to find it in the
schematic or pictorials. My copy is not that good and the pictures are hard
to make out.
Rick/K5IZ
...Appears to me that K5 heaters
Brian,
Here is a scan of the sequencing circuit from the 250/1k conversion. There is
probably other relative info also on the other pages.
http://photos.doxaudiolab.net/displayimage.php?album=18pos=4
Bill,
KB3DKS/1
__
AMRadio mailing
If the posted relay scheme is correct for your Gates, I believe both relays K5
and K6 are the old Amperite OD (On delay) type time delay relays. Probably
the same type relay with different time delays. K5 is in the low voltage power
supply and K6 in the high voltage circuit. More safety
K5 in my Gates BC-1T was an Amperite 115 VAC glass-envelope,
octal-based time-delay relay with one normally-open contact. It was 30
seconds delay, so that would be a 115NO030. I found that both time
delay relay coils in the rig are actually running on 230 VAC (as are
all the control
4 matches
Mail list logo